Open shelving is the detail that separates a genuinely minimalist kitchen from a plain one. It breaks up long runs of flat doors, gives a room somewhere to put the pieces you actually use, and lets the material of the carcass read as part of the décor. It is also the detail most often specified too late, sized wrong, or promised in a rendering that never survives production. If you are buying made-to-measure cabinetry from a manufacturer rather than picking a modular unit off a showroom floor, the quality of what arrives depends almost entirely on the questions you asked beforehand.

SANTERSON has been producing furniture and building materials in China since 2008, supplying villa, hospitality and office projects across multiple continents. Our Open Shelving Minimalist Cabinets sit in the Minimalist Kitchen Cabinets collection and are built to project-specific dimensions, materials and finishes. Below is the checklist we work through with buyers before a cabinet order is released to production — use it whether you buy from us or from anyone else.

1. What exactly goes on the open shelf — and how much of it?

Open shelving fails in one specific way: it turns clutter into a permanent display. Before you fix the layout, decide what will physically sit there. Daily plates and glassware need different shelf depths from a wine decanter or a stack of cookbooks. A shelf sized for tall bottles above a worktop becomes an awkward gap once you put a bowl on it.

A practical rule is to keep open bays to roughly one third of the total storage in a working kitchen, and to place them where items can be reached without a step stool. Everything that is not beautiful or genuinely daily goes behind a door. When you send us your layout, tell us what each bay is for — we then set the vertical spacing around those objects instead of defaulting to equal intervals.

2. What is the shelf span, and what is it carrying?

A closed cabinet has a frame resisting the load; an open shelf often spans between two panels with nothing under the middle. Ask your supplier to state the clear span of each open bay, the panel thickness, and the material used for that span. Long unsupported spans of thin board will sag over time under books, glass or stone — no finish choice fixes that.

Where a span is wide, ask what the manufacturer does about it: a thicker shelf panel, a concealed steel reinforcement, an intermediate support, or a shorter span. We confirm the dimensions and selected specification for every project before production starts, precisely so this decision is made on drawings rather than discovered on site.

3. Which finish, and does it match the closed doors?

With open shelving there is nowhere to hide a mismatch. The shelf interior, the carcass edge, the door face and any adjacent tall unit all sit in the same sightline. Ask for the finish name and the sample, not a photograph on a screen — wood grain direction, sheen level and edge banding colour read differently in your own daylight.

Our minimalist range is available across several finishes so that open bays can either blend into the surrounding doors or deliberately contrast with them. If you want a warm timber bay set against a cool door, we build both to the same carcass construction and confirm the combination on the shop drawing. Related references in the same collection include Grey Minimalist Cabinets and White Minimalist Cabinets.

4. Who measured the space, and when?

Open shelving is unforgiving of out-of-square walls. A modular unit can be scribed or packed; a made-to-measure run that meets two walls at once has to follow whatever the building actually did. Ask who takes the site measurement, whether it happens after plaster and floor finishes are complete, and how the survey is checked against the design drawings.

For our custom work we handle site measurement, 3D rendering, manufacturing and on-site installation as one package, so the same team carries the dimensions from the wall to the workshop. That continuity matters most where open shelving meets a window reveal, a flue, or an uneven ceiling.

5. Is lighting designed in, or added later?

Open bays are where people retrofit LED strip tape, and that is when the diffuser glows in your eye at breakfast. Decide during design: recessed channel in the shelf underside or side panel, driver location, switching, and how the fitting will be serviced if it fails. Ask the supplier whether the lighting cut-out is machined at the factory and whether the driver is left accessible.

Concealed linear lighting inside open shelving is something we build into the panel during production rather than gluing on afterwards, which keeps the cable route out of sight and repeatable across a whole project.

6. How does it arrive, and who assembles it?

Ask whether the open bays ship as assembled boxes or as panels for on-site assembly, how glass or stone shelves are packed and insured, and what happens if one panel arrives damaged. For international orders, ask specifically about container loading, customs paperwork and who receives the goods at the delivery address.

We arrange freight by sea, air and rail with the associated documentation and door-to-door delivery, and we cover on-site installation, inspection of snags, spare parts and maintenance as part of the project scope. Exact shipping terms, duties and timelines are confirmed per project rather than quoted as a blanket promise.

7. What appears on the shop drawing before production?

This is the single question that filters suppliers. Request a dimensioned drawing showing every open bay width and height, shelf thickness and material, edge treatment, lighting position, appliance cut-outs and clearances. If a supplier cannot produce one, they are guessing — and you will pay for it on installation day.

Item to see on the drawingWhy it matters
Clear span and height of each open bayFixes sag risk and confirms the objects you planned to store actually fit
Shelf panel thickness, material and edge detailDetermines load behaviour and whether the edge matches the door face
Finish code and sample referencePrevents colour and sheen mismatch between open and closed fronts
Lighting channel, driver position and accessAvoids surface-mounted strip lights and un-serviceable drivers
Wall, floor and ceiling dimensions as surveyedReveals out-of-square conditions before panels are cut
Appliance cut-outs and clearancesPrevents ventilation gaps being closed in by a shelving bay

8. Does the rest of the project use the same language?

A kitchen detail rarely stays in the kitchen. Open shelving reads best when wardrobes, sideboards and tall units repeat the same bay logic, material and handleless edge. Coordinating those pieces with one manufacturer keeps carcass construction, finish batches and tolerances consistent across rooms — which is where multi-room projects usually fall apart.

We manufacture across built-in furniture and fit-out categories, so open shelving can be carried through to Floating Shelves in bathrooms and living areas, and to Open Shelf Tall Cabinets that tie a kitchen wall to floor height. For whole-house work we produce the cabinetry against one set of drawings rather than one room at a time.

Before you sign: ask for the dimensioned shop drawing, the finish sample, the written shelf-span specification, and the name of whoever takes the site measurement. If all four exist in writing, an open shelving order is a manufactured product. If any one of them is missing, it is still an idea.

Send us your floor plan, a photograph of the wall, and a note on what you want each open bay to hold, and we will come back with a layout, a shop drawing and a quotation. SANTERSON handles design consultation, made-to-measure production, logistics and door-to-door delivery, installation and after-sales support from our base in Foshan, China — one contact from first drawing to handover.