When a wall-mounted display cabinet appears in a commercial tender, it usually arrives as a line item on a joinery schedule: one number, one finish code, one price. That is the wrong way to read it. A wall-hung display unit carries glass, hardware and, in many cases, integrated lighting onto a substrate that was never designed for that load, so the proposal behind it matters more than the drawing next to it. If you are assessing a quotation from SANTERSON for Santerson Wall Mounted Display Cabinets, the following checks will tell you whether the offer is complete enough to compare against competing bids on a like-for-like basis.

Start with what the product page actually commits to

The catalogue entry for Santerson Wall Mounted Display Cabinets places the unit in the display cabinets collection and describes it as configurable: finish, layout and dimensions are specified per space, with made-to-measure sizing and a choice of materials and finishes. That is the whole point of a custom joinery proposal — there is no fixed specification sheet to hold the supplier to, so your evaluation has to reconstruct the specification from the quotation itself.

Two practical consequences follow. First, a low price usually means a narrower scope, not a cheaper factory: fewer finish options, simpler carcass detailing, no lighting provision, less hardware. Second, anything you do not ask for in writing is something the site team will discover on installation day. Before comparing numbers, ask the supplier to restate the proposal against the checklist below.

Check 1: dimensions and the wall they hang on

A made-to-measure unit should come back with dimensioned elevations, not a nominal size. Confirm overall height, width and depth; confirm which faces are finished, because a wall-hung cabinet against a partition typically has one unfinished rear face unless it is a room divider; and confirm the plinth or shadow-gap detail at the base, since that is where site levels show up most visibly.

Then check whether the proposal says anything about the substrate. Wall-mounted joinery over 20 kg needs solid blocking, steel backing frames or through-bolted fixings, and on a commercial fit-out that blocking is usually inside a wall build-up somebody else is pricing. Decide which party carries it. If the quotation says "fixing to suit site conditions" without naming the substrate, treat it as an exclusion and price the risk yourself.

Check 2: doors, glass and hardware schedule

Display cabinets are judged on what you can see through. Ask which glazing is quoted — clear, bronze, smoked or ribbed glass each behaves differently under artificial light, and the same carcass finish reads quite differently behind them. The wider cabinetry range includes glass front display cabinets and curio cabinets, so if your design intent sits between an open shelf and a fully enclosed vitrine, ask for that variant to be priced as an alternative rather than assuming one detail covers both.

Ask for the hardware schedule by name: hinge or pivot type, soft-close provision, door orientation and swing, load rating on any glass shelf, and whether handles are specified or the fronts are handleless. Handleless fronts look clean in a render but need a finger gap or push mechanism that has to be built into the carcass at production, not retrofitted on site.

Check 3: lighting, power and who signs it off

Integrated lighting is where display cabinet proposals most often go quiet. The related illuminated display cabinet in the same collection is described as configurable, with a standing note to confirm lighting specification and electrical details for each project — which is precisely the question to put in writing. Ask what is quoted: fixture type and colour temperature, whether drivers and transformers are included and where they sit for access, how cables are routed and concealed, and whether a dimming or control interface is in scope.

Then be explicit about responsibility. A cabinet supplier can supply and pre-wire; the connection to a final circuit, testing and certification normally belong to the project electrician under local rules. Getting that boundary written into the proposal before production starts avoids two trades arriving on site assuming the other one did it.

Check 4: finishes and how they are approved

Across the cabinetry range, Santerson lists matte and high gloss lacquer, acrylic, melamine, wood veneer and aluminium-frame fronts. Each of those has a different behaviour around a display cabinet: high gloss reflects the light you have just installed inside the case, ribbed or smoked glass softens what sits behind it, and veneer grain direction has to be agreed when several units are installed side by side.

Ask how the finish is approved. A colour code in a PDF is not an approval; a physical sample panel, signed and dated against the production order, is. Confirm what happens if your specified finish is substituted for an equivalent — who authorises it and whether the price changes.

Check 5: how the supplier fits into the wider package

A display cabinet rarely sits alone. In a hotel lobby, villa showroom or office reception, it is one element of a joinery package that also includes media walls, sideboards and shelving. Santerson presents itself as a China-based manufacturer and one-stop furniture and building materials supplier, with the service range covering custom and OEM production, logistics and door-to-door delivery, installation and after-sales support. If your display cabinets are ordered inside that wider package rather than as an isolated purchase order, you gain one point of coordination — one drawing set, one production run, one container — but you also take on consolidated risk, so the proposal should still break the joinery scope into separately priced lines.

Ask what the quotation includes on the delivery side: packaging standard and crate marking, container loading plan, who handles customs clearance at destination, and whether installation is by the supplier's own team or a local contractor you engage. Warranty terms and spare-parts availability for hinges, glass and lighting drivers should be stated in the proposal, not raised after handover.

A short comparison table to run before you award

Item to confirmWhy it changes the price
Dimensioned elevations and finished facesNominal sizes hide extra panel work and returns
Substrate, blocking and fixing methodStructural backing is often excluded from joinery pricing
Glazing type and shelf load ratingGlass choice and glass shelves are priced separately
Hardware schedule by nameSoft close, handleless fronts and load ratings add cost
Lighting fixtures, drivers and controlOften quoted as a bare strip with no driver or access noted
Electrical boundary with the site electricianUndefined scope becomes a variation order later
Physical finish sample and approval recordPrevents substitution disputes at delivery
Packaging, freight, clearance and installation scopeLanded cost differs sharply between EXW-style and door-to-door offers
Warranty and spare parts for hardware and lightingDetermines lifetime maintenance cost, not just capital cost

If a proposal answers all nine lines, you can compare it honestly against another bid. If it answers four, the gap in price is almost certainly a gap in scope.

Questions worth sending before production starts

  • Which substrate will the unit be fixed to, and who installs the backing frame?
  • Are drivers and transformers accessible after installation without removing the cabinet?
  • What is the maximum distributed load per shelf, glass or otherwise?
  • Is a physical finish sample included in the approval process, and how long does it take to issue one?
  • Which line items are excluded from this price — blocking, electrical connection, on-site protection, making good?

Specifications, finishes, dimensions and service scope vary by project and configuration. Confirm the details for your specific requirement directly before placing a production order.

To discuss wall-mounted display cabinets as part of a joinery package for a hotel, villa or office project, contact SANTERSON — phone / WhatsApp +86-13928214007 (PHILLIP), email santerson@qq.com, or through the enquiry form on the SANTERSON website.