A single villa or apartment handover rarely needs one wardrobe. The master bedroom wants a long hanging run with drawers, the second bedroom is happy with shelves and a short rail, the dressing room asks for glass fronts and internal lighting, and the hallway wants a built-in that reads as a wall. When those rooms are quoted separately, the finishes drift apart, three sets of site measurements get taken, and the cost climbs because nothing is shared. A combination modular wardrobe programme solves this by treating every unit as a set of interchangeable modules — hanging, drawer, shelf and open sections built to the same construction — so the whole project can be specified, costed and produced as one package.

What makes a wardrobe scheme "combination modular"

In our catalogue the Modular Wardrobes collection is split by what a section does internally: hanging sections for garments on a rail, drawer-focused sections for folded and small items, shelf-focused sections for boxes and linens, open sections without doors, glass-fronted sections, and combination units that mix those functions in one run. The point of the split is procurement logic, not marketing labels. Once you know which module each room needs, you can count modules instead of describing bespoke joinery from scratch, and a supplier can price comparable construction across all of them.

Every unit in this collection is made to measure, with material and finish options and a layout set per project. That matters for budgeting: the module type fixes the construction and hardware, while the size, board choice and door face are what you actually decide room by room. Site dimensions and the selected specification still have to be confirmed for each opening before production.

Scope it room by room before you cost it

The fastest way to lose control of a wardrobe budget is to ask for "built-in robes to design intent" across several dwellings. Scope the package as a list of runs, and give each run three attributes: where it sits, which modules it contains, and which door face it carries.

SpaceModules that usually carry the loadWhat to fix early
Master bedroomHanging plus drawer-focused sections, shelf run aboveRail heights, mirror or glass front, whether a dressing-room extension is in the same order
Second and third bedroomsShelf-focused with one hanging sectionWhether doors match the master or drop to a cheaper face
Dressing roomGlass modular sections, open modules, island or bench if space allowsGlass tint, internal lighting points, power feed location
Hallway and entryOpen modular sections with closed storage belowCeiling finish interface, skirting return, whether the run is floor-to-ceiling
Guest or staff quartersSingle combination unit, flat panel doorsBoard grade, hardware level, delivery sequence

Write that list before requesting a quotation. A buyer who sends "12 wardrobes, 4 apartment types, finishes to be advised" gets an indicative number with everything excluded. A buyer who sends module counts per room type, one door face decision per type, and measured openings gets a number they can act on.

Where the money actually goes

Across a multi-product wardrobe package, cost moves with a small set of variables. Knowing them lets you trade deliberately instead of cutting everything evenly.

  • Door face and finish. Veneer, lacquer, acrylic, melamine and glass fronts all sit at different price points against the same carcass. Holding one carcass constant and varying only the face is the cleanest saving in a mixed project.
  • Glass and lighting. Glass modular wardrobes read beautifully in a dressing room but add glazing, framing and — if you want the interior lit — an electrical interface. Reserve them for the rooms where display is the point.
  • Drawer count. Drawer-focused modules are the most hardware-dense part of any run. Where a shelf module will do, use it; keep drawers where folded clothing actually lives.
  • Standard versus made-to-measure depth. Made-to-measure sizing is what lets a unit fit an awkward alcove or a sloping ceiling. Rooms with square, standard openings should be designed to standard depths so the custom work concentrates where it is genuinely needed.
  • Cut and trim on site. Skirting returns, cornice, architrave and floor thresholds are usually where a tidy quotation turns into an extra invoice. Decide who trims and packs before order.
A practical budgeting habit: price each apartment or room type as a "kit" of modules, then multiply by the number of dwellings. The kit is what you repeat; anything outside the kit is an exception line, and exceptions are where multi-product projects quietly overrun.

Consolidating several wardrobe types into one order

The commercial advantage of a combination modular approach is consolidation. One purchase order, one set of production slots, one container plan and one inspection window across all room types. That works only if the package is specified consistently:

  • One carcass construction across the project. Same board grade, same edge treatment, same hardware family. Faces can differ; structure should not.
  • A finish schedule by room type. Two or three door faces for a whole development is normally enough. Every extra face adds a setup and a risk of mismatched tones between batches.
  • One measurement pass. Take dimensions once, per dwelling type, after plaster and floor finishes are set, and issue them as a single schedule with unit codes.
  • A delivery sequence that matches the site programme. Wardrobes arriving before the room is closed in sit in storage; wardrobes arriving after the fit-out crew leaves cost you mobilisation twice.

If your project also needs other built-ins — media walls, tall cabinets, niche paneling, integrated cabinet lighting — put them on the same order. Same boards, same edge banding, same factory run, and the joinery across a dwelling reads as one design rather than three suppliers' interpretations.

A worked scoping example

Consider an apartment package with three dwelling types. Type A has a master bedroom plus two secondary bedrooms. Type B has one bedroom robe and a hallway storage run. Type C adds a dressing area with glass-fronted sections.

Here is how that scope reads once it is broken into modules:

Three dwelling types, one carcass, three door faces, one module library. The quotation comes back as a per-type kit price and a per-dwelling total, and any change order is a line item rather than a renegotiation.

What to send us for an accurate quotation

Send the following and we can price the package properly rather than indicatively:

  • Floor plans with each wardrobe opening dimensioned after finishes, plus ceiling heights.
  • A room-by-room module list — hanging, drawer, shelf, open, glass — or a sketch of each run.
  • The finish schedule: door face and colour or grain reference per room type, and interior finish.
  • Hardware expectations, soft-close needs, and whether internal lighting is wanted.
  • Dwelling counts per type, delivery destination, and the site programme for installation.

SANTERSON has manufactured furniture and building materials since 2008 and supplies wardrobes, cabinetry and interior fixtures as part of a one-stop package for villa, hospitality and office projects. Because wardrobes travel alongside flooring, panels, lighting and bathroom fixtures on the same order, our team handles design coordination, custom/OEM production, door-to-door logistics and installation support in one workflow — see turnkey solutions, custom & OEM service and door-to-door logistics.

Planning a wardrobe package across several dwellings or room types? Send us your plans and module list and we will scope it as kits with per-type pricing. Contact PHILLIP on WhatsApp +86 139 2821 4007, email santerson@qq.com, or use our contact page.