Parquet floors look simple on a sample board and complicated on site. The pattern draws the eye, but the finished result is decided by details that sit behind it: how thick the oak wearing layer is, how the boards are built up, which finish has been applied, and what the supplier has actually agreed to supply for your project. Before you place an order for European Oak Engineered Parquet Flooring, here is the short list of finish details worth putting in writing.

Start with the construction, not the colour

Every parquet line we produce for residential and interior projects uses a solid oak top layer over a multilayer base. The 3 mm solid oak wear layer is what allows the grain to read naturally and lets the surface take a finish properly; the multilayer structure underneath is what keeps the floor from moving as humidity changes. When you compare two products that look similar in a photo, ask which of these two elements you are actually seeing quoted, because marketing wording rarely separates them.

The same question applies to stability claims. Our product pages describe the multilayer build as reducing deformation and warping, which is the practical reason engineered boards are specified for interiors rather than solid strips. Anything beyond that — dimensional tolerances, moisture content at despatch, or performance under a particular subfloor — should be confirmed against the current specification sheet for the exact item you are ordering, not assumed from a catalogue image.

The finish questions to put in writing

  • Surface treatment. Confirm whether the boards are supplied with a wear-resistant factory finish or left to be finished on site. A factory-applied surface is applied and cured under controlled conditions, which is why our catalogue describes the surface as wear-resistant and suited to daily use.
  • Sheen level. Matte, satin and gloss change how parquet reads in a room far more than the tone does. Ask for the sheen description of the specific finish, and look at a board in daylight as well as under the project's lighting.
  • Grain character. Some boards are selected for clean, subtle grain; others keep knots and mineral marks on purpose. A smoked antique or brushed treatment also shifts the colour of oak, so describe the treatment rather than only the colour name when you place the order.
  • Edge profile and board format. Micro-bevel or square edges, board width and length, and the block or chevron format all affect how the pattern lines up once laid. These are supply details, not laying decisions, so they belong on the purchase order.
  • Underfloor heating compatibility. Several of our parquet boards are described as compatible with underfloor heating; others in the same family carry no such statement. Treat it as a per-item question and get confirmation for the item number you are buying, together with any guidance on maximum surface temperature and acclimatisation.

Compare the pattern options side by side

Once the construction questions are settled, tone and layout become easier to judge. These are four of the parquet and plank options in our flooring range:

ProductTone and grain characterWhere it typically works
European Oak Engineered Parquet FlooringLight oak tone, natural grain, minimalist warmthLiving spaces and residential interiors that need light underfoot
European Oak Parquet Engineered Wood FlooringRich deep brown grain with a classic parquet patternLiving rooms, bedrooms and premium residential projects
European Oak Herringbone Engineered Wood FlooringLight bleached tone, subtle grain, herringbone layoutBright, minimalist interiors and larger open rooms
Charcoal European Oak Engineered Wood FlooringDeep charcoal tone, bold grain with subtle knotsModern interiors where a darker, sleeker floor is wanted

If the layout you want is herringbone rather than block parquet, see Dark European Oak Herringbone Engineered Flooring for a darker interpretation of the same idea. The full range sits in our Engineered Wood Flooring category.

A note on sample boards: tone names such as "light", "charcoal" or "honey" describe a family of boards, not a single fixed colour. Oak varies between boards in the same batch, and a smoked or brushed treatment changes how the timber responds to light. Order physical boards from the exact item number before approving a floor for a whole storey.

Where the boards are made, and how that helps a multi-trade order

SANTERSON has been making furniture and building materials in China since 2008, and flooring is one part of a wider catalogue that also covers cabinetry, wall and ceiling finishes, lighting, ceramics and loose furniture. That breadth matters on projects: when the parquet, the joinery and the skirting come from one furniture and building materials manufacturer, the tones and dimensions are checked against the same drawings instead of being reconciled on site between three vendors.

How flooring fits into a wider fit-out order

Floors are rarely ordered alone. On villa and hospitality projects the same team is usually sourcing joinery, wall finishes, lighting and loose furniture at the same time, and parquet has to be coordinated with door thresholds, skirting, stair nosings and lift landings. Ordering as one package through a one-stop project furnishing supplier removes a lot of cross-referencing between vendors: the timber, cabinetry and metalwork are dimensioned against the same drawings.

Where a project needs a non-standard format — an unusual block size, a bespoke tone, or a finish matched to existing joinery — our Custom & OEM Service covers custom design and prototyping alongside material and finish choices. Confirm the available options, minimum order quantity and production schedule for your specific project before the design is fixed.

Delivery, laying and after care

Parquet arrives in cartons that need to be kept flat and dry until the site is ready. Our Logistics & Door-to-Door Delivery service covers freight arrangements, packaging and container loading, customs paperwork and shipment tracking, with delivery to the project address. Import terms, duties and transit times differ by destination, so we confirm those case by case rather than quoting a blanket figure.

Once on site, boards should acclimatise to the conditions they will live in before laying, and the subfloor must be dry, level and clean. Our Installation & After-sales Support covers on-site installation, inspection of the laid floor with a snag list, spare parts for later replacement and ongoing maintenance guidance. Warranty terms and response arrangements vary by project, so the exact coverage is set out in the contract documents rather than assumed from this page.

Before you sign the purchase order, confirm these six items:

  • Item number and board format, including width, length and block or chevron layout
  • Wear-layer thickness and the make-up of the multilayer base
  • Factory finish type and sheen level, or a clear instruction that boards are unfinished
  • Grading — whether knots and mineral marks are expected in the delivery
  • Written confirmation of underfloor heating compatibility for that item, if relevant
  • Spare quantity for future repairs, ordered in the same batch and finish

Talk to us about your flooring package

Send us the drawings or a room schedule and we will quote the parquet, matching joinery and finishes as one order. Contact PHILLIP on WhatsApp +86-13928214007, email santerson@qq.com, or use the form on our Contact page.