Procurement guide / Swimming pool category

A swim spa shell arrives on a flatbed, gets craned onto a deck, and is then expected to run a pump room full of equipment for years. The model number is the easy part of a purchase order. What decides whether the installation ends cleanly is the supplier behind it: what they can actually build, what they put in writing, and who answers when a component fails far from the factory floor. This guide walks through the checks a project buyer should run before committing to an Outdoor Swim Spa WS-S07B-T — and applies those same checks to any long-length swim spa on a villa, resort or clubhouse schedule.

Start with the specification sheet, not the price sheet

In this product family, one letter in the model code changes what you receive. The catalogue record for the WS-S07B-T lists a 7000 × 2200 × 1365 mm shell with a swim training system fitted; the closely related Outdoor Swim Spa WS-S07B is listed at 7000 × 2200 × 1335 mm with a waterfall among its features, and its published specification line shows no swim training system. Same footprint, different experience on the water — and a different equipment list to price, wire and hand over.

So the first question to a supplier is simple: send the specification sheet for this exact code. Read it line by line against your brief before you compare anyone's number.

ModelWS-S07B-T
Catalogue dimensions7000 × 2200 × 1365 mm (L × W × H)
Control system1 set
Swim training system1 set
Water pump1 pc
Filter pump1 pc
Jet total44 pcs
LED lighting3 lights plus 26 small LED lights
Total power8.75 kW
Catalogue featuresWater jets, LED lighting, Ozone, Swim training system

Two lines on that table deserve more attention than buyers usually give them. The single water pump paired with a swim training system is what creates the current you swim against — ask how the supplier sizes it and what flow they will commit to in writing for your configuration. And 8.75 kW of total connected load is not a number your electrical contractor can guess at: request the power and wiring requirements, plus the supply arrangement (single- or three-phase, breaker sizing, dedicated circuit), before the electrical package is priced.

Treat every figure above as catalogue data for one configuration. Optional equipment — control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps — is listed in the catalogue, but availability and compatibility vary by model. Get the final list in writing on your own quotation.

Six supplier checks that decide the outcome

1. Does the supplier manufacture, or merely broker?

Ask who produces the shell, the cabinet and the jet plumbing, and whether you can see the production line on a video call. A factory-direct supplier will let you inspect the acrylic shell layup, the reinforcement behind it and the equipment bay before the unit is sealed; a broker sends you a PDF and forwards your questions. If your project needs a non-standard length or a customised spa shape — square, round, oval or curved, as in the Customizable Shape Outdoor Spa line — the difference becomes obvious quickly, because only the party that controls production can change the mould.

2. Can they configure, or are you locked to a catalogue build?

Long-length swim spas rarely fit a project exactly as published. Deck heights differ, an architect may want the cabinet finish to match adjacent cladding, and a resort operator may prioritise filtration duty cycle over lighting count. Ask what can be changed on this model code, what cannot, and what each change costs in lead time. A supplier with an in-house OEM Furniture Manufacturing capability should answer with options and consequences rather than a flat yes or no.

3. Is the scope of supply defined line by line?

The most expensive misunderstandings sit in the grey zone: insulation, steps, cover, heat pump, sand filtration, spare jets, control panel. Request a packing list and an included/excluded schedule before payment. Two suppliers can quote the same model code with different boxes on the truck.

4. Who handles freight, and what do they actually deliver?

A 7000 mm shell is a heavy, awkward, breakable object that must clear site access, a crane or hiab lift, and an import clearance. Ask whether the quotation covers sea, air or rail forwarding, customs paperwork, packaging and container loading, tracking, and Furniture Logistics and Door-to-door Delivery — and confirm Incoterms, insurance cover and the delivery point in writing. Delivery to a port is not delivery to a site, and transit time quoted by one supplier is rarely comparable to another's unless the start and end points are the same.

5. What happens after handover?

Ask specifically about on-site installation support, snag inspection, warranty scope and exclusions, spare-parts availability for pumps, jets, control boards and LED modules, and who pays freight on a replacement part. Response-time promises are marketing until they appear in your contract with an owner's manual and a parts list attached. For a swim spa with 44 jets, three main lights and 26 small LEDs, the practical question is whether consumable and replaceable items are stocked and shippable, not whether the shell is guaranteed.

6. Can they coordinate with the rest of the fit-out?

A pool deck is never just a pool. It carries loungers, shade structures, wall and ceiling finishes, lighting, and sometimes an adjacent bathroom block. A supplier who also handles those trades can sequence production and delivery so the spa lands when the deck is ready, instead of sitting in storage. That coordination is where a Turnkey Interior Project Solutions supplier earns its fee — or fails to.

Questions worth putting in the RFQ

  • Confirm the exact model code, its dimensions and its equipment list — and ask what changes if a related code is substituted for availability reasons.
  • Request power, wiring and supply requirements for the quoted configuration, plus the control system's operating interface.
  • Ask which water treatment is included (ozone in the catalogue record) and whether UV sterilisation or sand filtration is offered on this model.
  • Request insulation specification and the recommended steps for your deck height.
  • Ask for lead time split into production, packing and transit — separately, not as one number.
  • Ask what documentation ships with the unit: wiring diagram, owner's manual, parts list, warranty terms.

How SANTERSON supplies this category

SANTERSON is a China-based manufacturer and one-stop furniture and building materials supplier, operating since 2008. The swimming pool range covers configurable outdoor swim and hydrotherapy units from compact spas to long-length models, including the WS-S07B-T and the wider Swimming Pools and Swim Spas catalogue. Project work is handled through named stages — consultation, design and planning, production, logistics, installation and after-sales — with custom/OEM manufacturing, door-to-door freight coordination and on-site support available as part of the same scope.

If you are sourcing a swim spa alongside other fit-out packages for a villa or hospitality project, that single point of contact is the practical advantage: one production schedule, one set of shipping documents, one party accountable for the whole delivery.

Send us the model code, your deck dimensions and your target delivery port. We will confirm what is included in that configuration, which options are available on it, and what the power and site-preparation requirements are — before you place the order.
Talk to SANTERSON about outdoor swim spa supply for your project — Contact Us. Enquiries receive a response within 24 hours; business hours are Monday to Saturday, 8:00 AM – 6:00 PM (GMT+8).