A quote that lists only a model number and a price is not yet a comparable offer. Before you sign a purchase order for the Outdoor Swim Spa WS-PC08ST-L, ask your supplier to put the shell size, water system, electrical load and delivery scope in writing. The checks below follow the order most buyers use when they compare swim spa quotations line by line.
1. Confirm the dimensions are the shell, not a deck plan
The catalogue entry for this model gives overall dimensions of 8490 × 2400 × 1470 mm. Ask which faces those numbers describe: external cabinet, internal water volume, or a suggested platform outline. Then match them against your site.
Three site questions follow directly from that:
- Clearance for service access. Pumps, the filter pump and the control system sit inside the cabinet, so an access side should stay reachable rather than being boxed in by a deck.
- Slab and load. A filled shell of this size is a heavy point load. Get a local engineer to size the slab or pedestal before production starts, not after delivery.
- Entry and route. Confirm how the unit reaches the site — standard door widths, crane access, or a side that can be assembled in place.
2. Read the water-system line item by line item
The specifications shown for this configuration list one control system, one swim training system, one filter pump, six jets in total and four LED lights. Compare that against how the spa will actually be used:
- Jets. Six jets is the total shown for this configuration, so ask where they are positioned and which muscle groups they serve. A quote that promises more jets than the listed six needs a revised specification sheet.
- Filtration. One filter pump is listed. Ask for the filtration cycle time and whether sand filtration is offered as an upgrade for your water conditions.
- Swim training unit. The listing shows one set. Ask what flow or current it produces, because that figure decides whether the length suits daily lap-style training or shorter sessions.
- Water treatment. Ozone is shown in the feature list. Confirm whether UV sterilisation is included or quoted separately.
3. Put the electrical requirement in writing
The catalogue shows a total power figure of 6.55 kW for this configuration. Treat that as the starting point for three conversations:
- With your electrician. Supply capacity, protection device and cable run on site must match the quoted load before the unit arrives.
- With the supplier. Ask which items are inside that figure and which options sit outside it — a heat pump or an additional water pump changes the connected load.
- With your own operating plan. Heating, filtration cycles and usage hours drive running cost far more than the nameplate figure alone. Ask for the equipment list per option so you can estimate realistically.
4. Separate included items from options
Catalogue-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. A competitive quote states each one as included, optional with a price, or not available. If two quotations look different by several thousand, the gap is usually here rather than in the shell.
Insulation and the heat pump deserve attention if the spa will run year-round in a cooler climate; steps matter for children and older users. Ask for the specification sheet of the exact configuration, not a generic brochure.
5. Check what the price carries to your door
For an imported unit, the quotation should name the delivery terms: packaging and container loading, freight mode, customs paperwork, and whether delivery goes to port or to site. SANTERSON's service pages describe sea, air and rail freight with customs documentation and door-to-door delivery, plus installation, inspection, warranty coverage and spare parts support. Ask for these in writing for your specific order — terms, scope and response times vary by project and destination, so confirm them for your country rather than assuming a standard level of service.
A useful test: ask the supplier to state who handles each stage between the factory gate and the filled spa in your garden. If any stage is left unnamed, that cost and risk will land on you later.
6. Compare like for like across the range
If a quotation comes back close to budget but the specification does not fit your site, move within the range instead of changing suppliers. Shorter configurations such as WS-PC08ST and WS-PC07ST-L appear in the same configurable series, with their own listed dimensions and equipment. The whole Swimming Pools and Swim Spas catalogue is available for side-by-side comparison, and where a fixed shell does not suit the plan, a customized shape outdoor spa in square, round, oval or curved form may fit better.
A short pre-order checklist
- Dimension source confirmed — external cabinet versus internal water volume
- Slab or pedestal load, plus clearance and access, checked with a local engineer; supply capacity and protection device checked with a local electrician
- Jet count and positions, filter pump duty, swim unit output stated per configuration
- Total power figure matched to your supply, with options listed separately
- Included versus optional equipment priced line by line
- Delivery terms, installation scope, warranty terms and spare-parts supply named in writing
Send the site measurements and your intended usage pattern to the supplier at the same time as your enquiry. A quotation built on that information can be compared honestly with a competitor's; one built on a model number alone cannot.