A single rustic solid wood wardrobe rarely travels alone. In a villa or apartment fit-out it sits beside matching vanity joinery, bedroom doors, and sometimes a whole run of cabinetry in the same timber tone. When those pieces are ordered as separate line items from separate suppliers, the grain, the finish and the reveal depths usually drift apart, and the room reads as assembled rather than designed. The quantity plan is where that drift is either prevented or locked in, because quantities decide how many production batches exist, and each batch is a fresh chance for a finish to vary.

This guide walks through how we approach quantity take-off and product coordination on made-to-measure solid wood wardrobe packages, and what a buyer should have settled before a purchase order is released.

Start from the room list, not the wardrobe count

Counting wardrobes gives you a number that looks complete but is not usable. A repeat unit type in a housing scheme may appear four times with three different reveal depths, because one bedroom has a structural column and another has an en-suite return. Build the take-off from a room-by-room schedule instead: every opening, every fixed dimension, every obstruction.

For each wardrobe position record the finished opening width, height and depth; whether the unit is built into a recess or stands proud of the wall; ceiling level and any cornice or skirting that must be scribed around; and the door swing or sliding track clearance. Our Rustic Solid Wood Wardrobes are made to measure, with material and finish options and a layout tailored to the project, so the schedule is the specification — nothing is chosen from a fixed catalogue size.

Order quantities should be stated per room reference, not as one aggregate figure. A purchase order reading "14 wardrobes" cannot be checked against site progress; a schedule listing Wardrobe A through N with room numbers and opening sizes can.

Group by finish family before you group by size

Timber tone is the constraint that drives everything else. Solid timber takes stain and oil differently depending on the cut, the density of the growth rings and how open the surface has been prepared, so two units specified in the same colour but produced in separate batches can sit visibly apart once they are side by side under site lighting.

Where a project uses more than one timber species across its joinery, plan the quantities around finish families rather than individual products. Our Oak Solid Wood Wardrobes and Walnut Solid Wood Wardrobes belong to the same collection, but oak and walnut will never match each other — they are alternatives for a scheme, not components of one. Choose the species per zone, then keep every unit that has to read as a set inside one production run.

If a development genuinely needs two phases delivered months apart, tell us at quotation stage. We can hold the finish reference and prepare sample panels against it so phase two is matched back rather than re-mixed.

Set the internal layout before the carcass size

Quantities go wrong most often inside the cabinet, because hanging rails, drawers and shelves are usually decided late. A shelf-focused layout and a drawer-focused layout need different carcass heights for the same clothes, and changing them after the carcass is cut means re-making the unit rather than re-cutting a panel.

For each position decide:

  • Hanging sections — single rail or double stack, and the clear drop height each needs.
  • Drawer banks — number of drawers and whether they sit above or beside the hanging space.
  • Open shelving — shelf count and spacing for folded stacks versus display.
  • Full-height panels and mirror or glass fronts, which change both hardware and packing.

A bedroom used by a long-stay resident and a serviced unit sold on the same drawing will not carry the same internal split. Price the layout you actually intend to hand over, not the cheapest configuration that fits the opening.

Coordinate the wardrobe with what touches it

A built-in wardrobe has four physical relationships: to the floor, to the ceiling, to the side wall, and to the door that closes off the space. Each one is somebody else's scope on most projects, and each one is where coordination fails.

Flooring level decides whether the carcass sits on a plinth or is scribed to a finished screed. Ceiling level decides whether the unit stops short with a filler panel or runs full height. Wall flatness decides whether reveal lines stay parallel — timber-framed walls are rarely dead straight over 2.4 m, so we allow for adjustment fillers rather than assuming a true opening.

The door is the piece buyers forget. If the wardrobe is behind a hinged or sliding wooden door, that door, its frame and its architrave should be ordered in the same species and finish run as the joinery. We supply interior doors, wall panelling and cabinetry alongside wardrobes through our turnkey project solutions, which is how a villa scheme keeps one timber language across bedrooms, corridors and bathrooms instead of three.

Order as one package when the set has to match

Splitting a joinery package across suppliers saves nothing once rework is counted. What it does cost you is matching: separate finish approvals, separate packing schedules, separate delivery windows, and separate people on site who each assume someone else scribed the reveal.

Consolidating wardrobes, doors and related cabinetry with a one-stop furniture and building materials supplier means one finish reference, one production window and one packing list. Our interior design service covers space layout planning, product specification and production coordination with on-site guidance, so the schedule that drives quantities is the same document that drives manufacture and handover.

A pre-order checklist

  • Room-by-room schedule with opening width, height and depth measured off finished surfaces.
  • Species and finish confirmed per zone, with sample panels approved before production.
  • Internal layout fixed per position: rails, drawers, shelves, any glass or mirror front.
  • Floor, ceiling and wall interface details agreed with the trades who prepare them.
  • Doors, frames and architraves included in the same timber and finish order.
  • Delivery sequence mapped to site access and room completion order, not to purchase convenience.

Send us the drawings or the room schedule and we will return a quantity-checked specification with finish references. Confirm dimensions and selected specifications for each project before production is released — that single step is what keeps a run of rustic solid wood wardrobes reading as one deliberate design instead of fourteen separate purchases.