A conversation set looks simple on a mood board: two chairs, a sofa, a pair of round tables, some beige cushions. On site it is a different story. The weave colour does not match the lobby joinery, the seat depth is too shallow for the lounge programme, the table tops arrive in a finish nobody specified, and the cushions have no cleaning regime behind them. Most of these problems are not manufacturing faults — they are specification gaps that were never closed between the design team and the buyer.

This article walks through what we ask designers and procurement teams to agree on before an all-weather wicker outdoor conversation sofa set with round coffee tables goes into production, using our own woven lounge suite as the working example.

Start from the setting, not the catalogue page

Our wicker conversation set is built around a 2-seater sofa, two woven armchairs and a pair of mixed round coffee tables. Fine open-lattice synthetic rattan is woven over a hidden aluminium frame, with a curved silhouette and soft beige cushions. That breathable woven structure stays comfortable in hot weather, which is why the piece usually lands in boutique resort lobbies, villa pool patios and garden courtyards.

Before anything else, we need to know which of those settings you are furnishing, because the same set answers three different briefs:

  • Resort lobby or lounge — high hand-over from guests, so cushion foam density, cover abrasion resistance and a removal-for-cleaning detail matter more than the weave pattern.
  • Pool patio — splashing and frequent hosing down, so frame finish, drainage through the weave and cushion drying time come first.
  • Garden courtyard or terrace — longer exposure to sun and rain, so placement, cover provision and rotation of pieces move up the list.

If you are working on a seaside terrace with salt air, we would normally steer you towards a different construction. Our rope weave outdoor sofa set with teak armrest and nesting coffee tables pairs vertical rope weaving with an anti-rust aluminium frame and natural teak armrest caps, which is the combination we reach for in high-salt conditions. Choosing the right family of product at this stage prevents a long argument later.

The six items that must be closed before an order is placed

Item to align onWhat the designer decidesWhat the buyer confirms
Wicker colour and weaveWeave scale, tone and how it reads against façade and paving samplesWhether one sample set is approved for all buildings or phases
Cushion fabric and colourPalette, contrast piping, how covers sit when they are removed for cleaningReplacement cover quantities and the cleaning method on site
Table topDiameter pairing, height relationship to seat height, edge profileTop material and finish, plus spare-table allowance
Frame and fixingsVisible or concealed frame, leg detail, how pieces sit on the pavingFrame finish system for the exposure level of the site
Set configurationLayout drawing: how many seats per cluster, circulation gapsCluster count per floor or zone, and mix across phases
Dimension adjustmentsSeat depth and back height where the programme needs itWhich adjustments are standard and which need re-tooling

We can adjust wicker colour, cushion fabrics and table tops to hospitality project design requirements, so none of these decisions have to follow a stock option. What matters is that the decision exists on paper before production starts.

Two conversations worth having early

Wicker, rope or aluminium frame — pick on exposure, not on looks

Synthetic rattan over an aluminium frame gives you the warm, textured look and a breathable surface for hot climates. If the design language is more geometric and low-profile, our aluminium frame outdoor conversation sofa set with teak tabletop and arm caps uses a solid aluminium frame with natural teak accents on the armrests and table surface, which suits infinity pools and coastal terraces where clean lines are the priority. Both are made for long-term outdoor use; the difference is how they age in your specific exposure and what maintenance you can realistically staff.

Round coffee tables: pair them as a set, not as two singles

The reason this configuration uses a pair of mixed round tables is that clusters get rearranged. Two tables at different diameters can be pushed together for a larger surface or split to either side of a sofa without leaving an awkward gap. Decide on the diameter pairing and top height in the layout drawing, then keep that pairing identical across every cluster — mismatched table heights are one of the most common complaints we hear after handover.

A short specification checklist

  • ✓Site exposure recorded for each zone: shaded, sun-exposed, splash zone or salt air.
  • ✓Approved physical sample of wicker colour and cushion fabric, referenced by code in the order.
  • ✓Seat depth and back height confirmed against the intended use, not just the drawing scale.
  • ✓Cushion covers specified as removable, with a named cleaning method for the operations team.
  • ✓Table top material, finish and diameter pairing written into the schedule.
  • ✓Cluster quantities per zone signed off, including any spares for rotation.
  • ✓Delivery route and storage area agreed before the containers arrive on site.

One practical note: performance wording on a product page is our description of how the piece is built, not an independent test report or a statement about local code compliance. For any regulated element of your project, have your own consultant confirm requirements before you specify.

Where we fit in the process

SANTERSON has been manufacturing furniture and building materials in China since 2008, and outdoor collections like this one are usually part of a wider package rather than a standalone purchase. Our interior design service covers space layout planning, concept design and mood boards, furniture layouts with 3D visual renderings, and whole-space indoor and outdoor furnishing schemes, followed by drawing and production coordination with on-site guidance. The cooperation steps are straightforward: project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up.

For custom work we handle bespoke material finishes and textures, OEM manufacturing, flexible minimum order quantities and brand customisation. Logistics covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. Installation and after-sales support includes on-site installation, inspection and snags, spare parts and ongoing maintenance.

If you are specifying outdoor lounge furniture for a villa, resort or hotel project, send us the layout drawing and the finish schedule and we will come back with a specification proposal for the set configuration — including where a different weave family or frame type would serve the site better.

Frequently asked questions

Can the wicker colour be matched to our own sample?

Yes. Wicker colour, cushion fabrics and table tops are adjusted to project design requirements on hospitality orders. Send the reference sample or a colour code and we will confirm what can be reproduced before you commit the schedule.

Are the cushions removable for cleaning?

Yes, cushion covers on this set are removable for cleaning. We suggest agreeing the cleaning method with your operations team at specification stage so replacement covers can be ordered in the same batch.

Can we order a different mix of pieces than the standard configuration?

Yes. The 2-seater sofa, two armchairs and pair of round tables is the reference layout; cluster counts, dimension adjustments and table pairing are set from your layout drawing.

Is this set suitable for a beachfront project?

For high-salt seaside conditions we would normally propose the rope weave set with an anti-rust aluminium frame instead, or discuss a frame finish suited to that exposure. Tell us the distance from the coast and the exposure of the terrace and we will recommend the construction rather than assume it.

To discuss an outdoor furniture package for your project, send us your layout drawing and finish schedule, or browse the wider outdoor furniture collection.