A run of recessed panel wardrobes looks simple on a drawing: a frame, a field, a shadow gap. The hard part is getting the whole set to arrive with the same reveal depth, the same finish tone and an internal layout that matches each room it lands in. That consistency is exactly what OEM sourcing is for, and it is where most wardrobe enquiries go wrong when they are treated as off-the-shelf purchases instead of manufacturing briefs.

What OEM actually changes on a panelled wardrobe

In an OEM arrangement the factory builds to your drawings and under your brand, rather than offering you a fixed catalogue item in three widths. For a built-in furniture line this matters more than it does for loose case goods, because the wardrobe has to fit the building: floor-to-ceiling heights vary between levels, skirting and architraves differ by room type, and a recessed panel only reads well when the router cut and the frame profile are set once and repeated.

Our OEM furniture manufacturing service covers bespoke material finishes and textures, OEM production with flexible minimum order quantities, and brand customisation such as engraving, logos and packaging. For wardrobe programmes specifically, the variables you control are the panel profile, the board and surface material, the door mechanism, the internal fitout and the case dimensions.

Step 1 - Send a room-by-room schedule, not a mood board

A quotation for made-to-measure joinery is only as good as the opening sizes behind it. Before we can price anything, we need a schedule that lists each wardrobe by room or unit number, with finished width, height and depth taken at several points across the opening, plus notes on out-of-square walls, skirting treatment and whether the unit sits under a sloped ceiling. Where drawings exist, send the elevations as well; where they do not, we work from the site measurements your team captures.

Two details decide whether a recessed panel looks crisp or clumsy, and both belong in the schedule: the depth of the routed rebate on the door field, and the width of the stile around it. Specify them once, and every door in the batch is cut to the same setting.

Step 2 - Fix the material and finish before the layout

Panelled wardrobe doors are usually specified on our side as solid wood, wood veneer, or a melamine or lacquered board. Our recessed panel wardrobes and their raised and arched siblings sit in the same classic paneled collection, with made-to-measure sizing and a choice of material and finish; next door, our classic paneled solid wood wardrobes suit projects where the door is expected to be read up close, while veneered and lacquered doors are specified when a consistent colour across a whole floor is the priority.

Whatever you choose, order the finish sample against a physical board rather than a rendered image, and confirm it under the lighting actually used in the bedrooms. A warm white recessed panel under a warm bedroom fitting reads very differently from the same board under cooler corridor lighting.

Step 3 - Design the internal fitout per room

The door is what the buyer sees; the internal layout is what the resident uses. Our wardrobe cases are configured with hanging areas, drawer zones and shelf storage arranged to the way each room is used - a main bedroom needs long-hang sections and a jewellery drawer bank, a second bedroom usually needs more shelf length, and a guest room can carry deeper stacked storage.

If the brief leans handleless, say so at this stage. A pull-free facade changes door thickness, the reveal at the case opening and the way adjacent doors clear each other, which is not something you want to discover after the first batch has been cut.

Step 4 - Prototyping, drawings and sign-off

For a new panel profile we produce a prototype door so the rebate depth, edge break and finish can be judged in the hand before tooling is set for the full run. Alongside it you receive shop drawings showing case construction, door elevation, hinge positions and the internal fitout per unit. Nothing enters production until those drawings are signed.

This step is where OEM sourcing saves the most money, because a change to a drawing costs a day, while the same change after cutting costs a batch.

Step 5 - Production, packing and door-to-door delivery

Once drawings are approved, cases are machined, finished and quality-checked in our facility. Wardrobe shipments are packed case-by-case with the room or unit number marked on each package, so the site crew is not sorting a mixed container against a plan at midnight.

Our Logistics & Door-to-Door Delivery service covers freight forwarding by sea, air and rail, customs paperwork such as commercial invoices, packing lists and certificates of origin, container loading and shipment tracking. Import terms, duties and transit arrangements are confirmed per project rather than assumed.

Step 6 - Installation and what happens after

Made-to-measure joinery only performs when it is installed to the line it was designed for. Our Installation & After-sales Support covers on-site installation, inspection and snag lists, plus spare parts and replacement for hardware. For multi-unit work we would rather send one wardrobe set complete, have it installed and signed off, and then release the remaining batches to that approved standard.

Where OEM sourcing goes wrong

  • Ordering against a single nominal size instead of per-opening measurements. Ceiling heights on a villa floor are rarely identical, and a small error turns a flush case into a visible gap.
  • Specifying the door but not the internal fitout. The cheapest way to lose a resident's storage is a wardrobe with one rail and nothing else.
  • Choosing a finish from a screen. Board samples should be approved on site, in the room's own light.
  • Skipping the prototype when the panel profile is new to the project. One door sample settles rebate depth, edge break and colour in a single review.

Working with us on a wardrobe programme

SANTERSON has manufactured furniture and building materials since 2008, supplying one-stop furniture and building materials for projects including residential, villa and hospitality fitouts. Wardrobe casework is often delivered as part of a wider package, as in our mid-century whole house custom cabinetry and built-in storage project, where bedroom joinery was measured on site and built to the same finish schedule as the kitchen and shelving.

Send us your room schedule, elevations if you have them, and the finish direction you are working towards, and we will come back with a configuration and quotation for review. For a first pass on panel profile, board material and internal layout, contact our team at Contact Us and we will confirm the specification sheet for your project before any pricing is issued.