Flush sliding doors rarely arrive as a single line item. They sit between the joinery package, the wall finish schedule and the door schedule, and every one of those trades has an opinion about who supplies what. Budgeting them properly means deciding early which openings get a sliding leaf, which get a hinged or concealed alternative, and where the track, the panel finish and the wall opening are actually specified by the same supplier. That last decision is where most of the cost variation hides.

Start with the opening schedule, not the door price

Send your openings list to the supplier before you ask for a quotation. For each opening note the clear span, the finished floor level, the wall build-up (stud, lining, plasterboard, tile or stone), and whether the leaf runs on the face of the wall or pockets into it. Santerson Flush Sliding Doors are made to measure, with finish, layout and dimensions specified per project, so an opening that changes after production starts is a change order rather than an adjustment.

Group the openings into three buckets: doors that must sit flush with a panelled wall, doors where a standard sliding leaf is acceptable, and openings that can be re-solved as hinged or concealed instead. Mixing Santerson Flush Interior Doors with Santerson Flush Hinged Doors in the same villa or apartment package is normal, and it usually lowers the budget because only the openings that genuinely need a sliding action pay for track hardware.

What actually drives the unit rate

  • Panel size and quantity. Made-to-measure leaves are priced on dimension and repeat count. Reusing one leaf width across several rooms is cheaper than specifying a unique size for every opening.
  • Finish continuity. A leaf that has to match veneer cabinetry or a lacquered wall panel needs the same supplier for joinery and door, otherwise you pay twice for sampling and colour approval.
  • Track and pocket detail. Face-running tracks are simpler than pockets. Pockets need a framed cavity built into the wall by others, and that is a builder's cost that belongs in your door line, not hidden in the joinery allowance.
  • Hardware and handle style. Where a clean wall face matters, Santerson Handleless Concealed Doors and Santerson Decorative Concealed Doors are the alternatives to quote against a sliding leaf for the same opening.
  • Fixings, thresholds and architraves. Ask what is included in the quoted price and what arrives separately. Thresholds and floor tracks are frequent omissions.

Scope the doors with the joinery package, not after it

Flush detailing only works when the door and the surrounding built-in furniture are drawn together. A wardrobe wall with a sliding leaf and an adjacent bank of cabinetry should be measured on site in one visit, produced under one schedule, and installed by one crew. Our Glass Sliding Door Wardrobes and Santerson Closet Sliding Panels are specified the same way as our doors — made-to-measure sizing, material and finish options, layout tailored to the project — so the wardrobe wall, the closet front and the sliding door beside it can be issued as one package instead of three separate orders from three suppliers.

The same logic applies to kitchen and wet areas. Cabinetry such as Handleless Minimalist Kitchen Cabinets shares panel materials and hardware with the doors beside it, so buying them together removes duplicate sampling and keeps one accountable supplier for the finish schedule. Confirm dimensions and selected specifications for each project before any order is released; product pages give a configurable overview rather than a fixed technical sheet.

Build a realistic budget line

For each door type, put four numbers in the spreadsheet: the supply price of the made-to-measure leaf and frame; the hardware and threshold allowance; the wall-preparation cost carried by the builder for pockets, heads and jambs; and a contingency for openings that move during construction. Then add one line for freight and one for installation. Our service covers custom and OEM production, door-to-door logistics and on-site installation support, so those costs can be quoted as part of the package instead of estimated from three different vendors.

Line itemWho specifies itCommon omission
Sliding leaf, frame and trackDoor supplierNon-standard heights
Wall pocket, head and jamb framingBuilder / framerLeft out of the door line entirely
Finish matching to panelling and joineryDesigner + supplierSample approval time
Freight, packaging, on-site installationSupplier packageCounted as "extra if needed"

Five questions that settle the scope quickly

  1. Which openings can be re-solved as hinged instead of sliding, without hurting circulation?
  2. How many distinct leaf widths do we actually need across the whole floor plan?
  3. Who is building the wall pockets, and by what date must the frames be on site?
  4. Which doors must match a veneer or lacquer finish, and who supplies the approved sample?
  5. Is the quotation inclusive of thresholds, fixings, freight and installation?

Answer those five before you compare prices, and the quotations will be comparable. If you are assembling a multi-product package — doors, wardrobes, cabinetry and wall panelling from one manufacturer — send us your opening schedule and finish schedule and we will scope Santerson Wooden Sliding Doors or the flush alternatives against it, with dimensions and specifications confirmed for each project.

Project enquiries: contact SANTERSON — China-based manufacturer of furniture and building materials, operating since 2008, with custom/OEM production, door-to-door delivery and installation support.