Glass open wardrobes sit in an awkward middle ground of the joinery schedule. They carry the visual lightness of a display cabinet but the daily wear of bedroom storage, and they are specified as made-to-measure built-ins rather than picked off a shelf. That combination is exactly why the manufacturer you choose matters more than the glass you choose: two workshops handed the same drawing will deliver very different wardrobes in the frame section, the shelving span and the way the unit is packed for export.
If you are a builder, interior designer or project buyer comparing quotations, the shortlist below is based on what we ask of every joinery supplier on residential and villa projects, using Glass Open Wardrobes in our Open Wardrobes collection as the reference point.
1. Confirm the unit is genuinely made to measure
Open wardrobes are rarely a standard width and height, because the wall they sit against rarely is either. Ask whether sizing, layout and finish are specified per project, or whether you are being offered a fixed module with limited adjustment. A supplier that treats each wardrobe as a project-specific build will take your opening dimensions, ceiling condition and skirting detail into account instead of asking you to pack out the wall to suit their catalogue.
Our own Glass Open Wardrobes, along with Metal Frame Open Wardrobes and Freestanding Open Wardrobes, are listed as made-to-measure with material and finish options and a layout tailored to the project. On any quotation, ask for the shop drawing before you sign: if a supplier will not produce one, they are working from assumptions.
2. Ask what the frame is actually made of
With an open wardrobe there is no door to hide the construction, so the frame profile becomes the design. Compare suppliers on three points: the material of the vertical and horizontal members, how the corners are joined, and how the glass or shelf sits into the section. A metal-framed open wardrobe behaves differently from a board-carcase open wardrobe under load, and a thin decorative trim is not the same as a structural profile.
A reliable way to test this during a quotation round is to request a corner sample or a short mock-up section. Suppliers who manufacture in their own factory can usually provide one; traders reselling someone else's catalogue often cannot.
3. Check the storage layout against how the room is used
Open wardrobes fail in use for predictable reasons: shelves that span too far and bow under folded linen, hanging rails placed where they block circulation, no drawer zone for small items, and dust exposure in a bedroom. Ask the manufacturer to show the internal layout drawing with rail heights, shelf spans and drawer positions marked, and tell them how the room is used before they draw it.
Where a fully open layout is too exposed for a bedroom, ask whether the same supplier can also build a closed version in the matching finish. Being able to mix open display sections with closed storage in one production run keeps the joinery consistent and simplifies delivery. For bedrooms that need full enclosure, ask for a closed wardrobe in the same finish — a custom minimalist bedroom wardrobe with flat panels and an optional handleless front, where hanging areas, drawer zones and shelf storage are arranged around the client's storage habits.
4. Test the finish schedule in person
Glass reads every finish it touches, so a frame colour that looks neutral on a screen can turn warm or green once it sits beside clear or smoked glass. Ask for physical samples of the board or metal finish, and view them next to a sample of the glass you intend to use. Suppliers offering a real finish schedule will send both without hesitation.
Also ask how the finish is applied and what it is expected to tolerate in daily use — cleaning agents, abrasion at shelf edges, and repeated handling on open units. Get the answer in writing rather than accepting a general assurance about durability.
5. Verify who manufactures, and where
The distinction between a manufacturer and an intermediary shows up later, at the point where something needs changing. A factory that handles design consultation, material selection, production and quality control in one place can absorb a late dimension change; a reseller has to route it, and the cost and delay land on you.
SANTERSON is a China-based furniture and building materials manufacturer operating since 2008, supplying project customers in hospitality, villas and offices. Our scope covers custom and OEM work, door-to-door logistics, installation support and after-sales service, so open wardrobes are coordinated with the rest of the fit-out — built-in furniture, wall and ceiling finishes, flooring, sanitary fixtures and lighting — rather than ordered as an isolated item.
6. Ask how a glazed unit is packed and delivered
A wardrobe with glass panels and long frame members is a freight problem waiting to happen. Ask specifically how the glazing is protected, whether the unit ships flat-packed or assembled, how panel edges are supported, and what documentation accompanies the shipment. Confirm the Incoterms you are being quoted, who handles customs clearance at destination, and how damage in transit is recorded and resolved.
We arrange sea, air and rail freight with packaging and container loading, shipment tracking and door-to-door delivery, but import terms, duties and delivery scope should be agreed case by case for your site rather than assumed from marketing copy.
7. Read the after-sales terms before you order
Ask what the warranty covers, how replacement parts such as shelf pins, rails or a replaced glass panel are supplied, and who carries out installation on site. For imported joinery, spare parts and clear snag procedures matter more than the sales promise.
We provide on-site installation, inspection with a snag list, warranty coverage, spare parts and replacement, and ongoing maintenance; ask for the current terms in writing for your project so response times and exclusions are documented rather than quoted from a page.
A shortlist checklist
- Shop drawing with opening dimensions, rail heights and shelf spans before order confirmation
- Frame material, corner joint method and glass fixing detail stated, not implied
- Physical finish samples viewed beside the chosen glass
- Confirmation that sizing, layout and finish are specified per project
- Named factory, with production and quality control under one roof
- Packing method, Incoterms, customs responsibility and damage procedure agreed in writing
- Warranty, spare parts and installation scope documented for the destination site
Next step
Send your bedroom elevation to us with the opening dimensions and how you intend to use the space, and we will return a layout and finish proposal for an open wardrobe that suits it — or a combination of open display sections and closed storage if that serves the room better. Contact SANTERSON at Contact Us to start the drawing stage.