A swim spa is easy to leave out of a materials schedule until the pool deck is already framed. By then the concrete haunch, the equipment access and the power feed have been decided without it, and the unit arrives as a site problem instead of a line item. This article uses Outdoor Swim Spa WS-S06CT-L to show how one pool item is broken down and carried through a whole-project schedule, so the spa, the deck, the electrical works and the internal fit-out are all drawn from the same list.

Why the swim spa belongs in the main schedule, not an appendix

On most villa and resort packages the pool sits with a landscape or civil contractor while everything else sits with the fit-out supplier. That split is fine commercially, but it breaks down when the two sides work from different documents. The spa needs a slab or plinth, an inspection point for pumps and filters, a power supply and a handover sequence that matches the deck finish. If the schedule only records it as "swim spa, by others", nobody owns those dependencies.

The practical fix is to treat the swim spa like any other fixture in the package: give it a line number, state its dimensions and services, name the trade responsible for each interface, and put it on the same approval timeline as cabinetry, flooring and sanitaryware. That single-schedule approach is how our one-stop furniture and building materials supplier service handles projects that include a pool item alongside the interiors.

What the catalogue record gives you to schedule against

The first column of any good schedule is dimensional certainty. For this model the catalogue lists 6670 × 2380 × 1400 mm, which sets the clear opening in the deck, the turning circle for delivery, and whether the unit can be craned or walked in before the surrounding structure closes. Compare that with the shorter Outdoor Swim Spa WS-S06CT at 5880 × 2380 × 1400 mm: same width and depth, so the deck detailing and access logic carry over almost unchanged, while the length is what changes the room it occupies.

Schedule lineCatalogue reference for WS-S06CT-LInterface owner
Overall footprint6670 × 2380 × 1400 mm as cataloguedStructure / deck contractor
Water movement and hydrotherapyOne water pump, one filter pump, jet total of 31 pcs, plus a swim training systemSupplier scope; plant room or equipment bay by others
Control and comfortOne control system; temperature setting shown as a listed featureSupplier scope, with electrical supply by the M&E contractor
Water treatmentOzone listed on the product page; UV sterilization appears in the optional-accessories listTo be fixed at order confirmation
Lighting4 LED lights shown in the specificationsSupplier scope; final circuit by M&E
Electrical loadTotal power shown as 8.35 kW for this configurationM&E contractor, subject to the confirmed configuration

The figures above are transcribed from the product page as catalogued. They are a starting point for coordination, not a substitute for the confirmed specification: which accessories are fitted, and the electrical requirements that go with them, both change with the configuration you order. We ask every project to confirm included equipment and power requirements against the selected build before those numbers are frozen into a drawing.

Reading the options list as separate schedule lines

The accessories catalogued for this range — control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps — are where schedules usually go wrong. Each option has a different consequence on site:

  • Heat pump and insulation. These decide whether the spa runs as a year-round lap pool or a seasonal one, and they change the plant location and any noise separation from neighbouring bedrooms.
  • Sand filtration versus the standard filter pump. Filtration choice drives access space and backwash routing, which has to reach a drain.
  • Steps. Integral or external steps change the usable deck area and the slip-rating boundary between wet and dry finishes.
  • UV sterilization and ozone. Treatment method is a maintenance and chemical-storage question for the operator, so it should be signed off by whoever runs the facility after handover.

Each of these belongs on its own line with a status column — selected, pending or deleted — rather than being bundled into one "spa accessories" allowance. We quote the range the same way, so the priced document and the site schedule stay in step.

Sequencing the spa against the rest of the package

Once the swim spa carries real dimensions and services, it starts to interact with other trades in a way you can plan:

  1. Set-out before the deck is poured. Footprint, plinth edge and equipment access come from the confirmed catalogue dimensions, not the brochure image.
  2. First fix electrical with the load in hand. The stated total power for this configuration lets the M&E contractor size the circuit and route the connection point before the shell closes.
  3. Deck finishes after the spa is on site or on a confirmed delivery date. Tile and coping widths are set against the actual shell, which avoids cutting to a tolerance that has moved during shipping.
  4. Handover last. Commissioning of pumps, control system and lighting sits with installation and after-sales, so it should be scheduled after wet trades finish, not during them.

This is the same order we work to on turnkey interior project solutions, where consultation, design and planning, production, logistics, installation and after-sales are sequenced as one programme rather than six separate purchases.

Keeping the pool with the rest of the outdoor scope

A swim spa rarely stands alone. Poolside loungers, shade structures and the terrace furniture that surrounds it come from the same procurement round, and putting them on one schedule keeps finishes and delivery dates consistent. Our outdoor furniture for villas and resorts covers aluminium frames, rope weave, wicker and teak-look tops, along with pergolas and daybeds, so the deck furniture and the water feature can be quoted, packed and shipped together.

Where a project needs a different geometry — a courtyard that will not take a straight shell, or a terrace where the view dictates the axis — our customizable shape outdoor spa supports square, round, oval and curved configurations in an acrylic shell with structural reinforcement. Custom geometry needs more lead time on drawings, so it should enter the schedule earlier than a catalogue model, with a drawing approval milestone of its own.

A short checklist before the schedule is frozen

  • Catalogue dimensions entered as a checked line, with delivery access assessed against them.
  • Every option from the accessories list either selected or explicitly deleted, with no "to be advised" left on items that affect structure or power.
  • Electrical load and control system confirmed for the ordered configuration, then passed to M&E in writing.
  • Equipment access, inspection point and drain routing shown on the deck drawing.
  • Poolside furniture, shade and finishes scheduled against the same delivery window as the spa.
  • Commissioning and handover placed after wet trades, with the responsible party named.

Send us the model reference and the deck drawing if you are assembling a materials schedule for a villa or resort package and want the swim spa quoted alongside the interiors. We will confirm the included equipment, the electrical requirement for that configuration and the lead time, then return a priced schedule line your site team can build to.