A decorative dining cabinet looks simple on a drawing: one run of cabinetry against the dining wall, some open shelving above, a countertop to hold a coffee machine and glassware. It is only at production stage that the difference appears between a cabinet that fits the room and one that arrives too deep for the walkway or clashes with the floor finish. If you are sourcing joinery from SANTERSON for a villa or residential living project, the items below are the decisions worth closing out before the cutting list is released.

Start with the wall, not the elevation

Our Decorative Dining Cabinets line is made to measure, so nothing in it is fixed until your dimensions are. Before we draw anything, send the room survey: overall wall length and height, the position of skirting, switches, sockets and any radiator or downlight in the run, plus floor level if the site is still being finished. A 20 mm difference in a ceiling height changes whether a full-height unit can be scribed to the wall, and a socket sitting behind a wine fridge niche has to be relocated before the carcass is built, not after.

Tell us what the cabinet has to hold. Glassware, table linen, bottles, a coffee machine, ceramics on display — each one changes shelf depths, drawer configuration and whether you need glass fronts instead of closed doors. The same wall can be solved as glass front dining cabinets, a floor-to-ceiling tall unit, or a low sideboard with open shelving above; the storage brief decides which.

Agree the finish against physical samples

Wood grain reads differently on a 1:50 elevation than it does across two metres of door front. Our Custom & OEM service covers bespoke material, finish and texture selection — wood, metals, engineered stone and laminates — so choose the door face, carcass edge and countertop from samples under the actual site lighting. Decide at the same time on handle style or a handleless grooved edge, and on how the cabinet relates to neighbouring joinery: in an open-plan kitchen and dining space, mismatched grain between the dining cabinet and the kitchen run is the most common regret.

Where the cabinet sits next to stone, tiles or wall panelling, confirm who supplies what. We also manufacture wall panel systems, so a single order can carry both the cabinetry and the panels it meets, which removes the joint detail from two separate trades.

Lock down lighting and services early

Integrated lighting is not an accessory you add at the end. Recessed channels for integrated cabinet lighting, transformer position, and the cable route to a driver all have to be built into the carcass. If a niche will display ceramics with LED behind it, or a countertop will take an appliance, send the electrical layout before production so the cut-outs and ventilation are correct.

Confirm how it travels and lands on site

Built-in cabinetry is awkward freight: long panels, heavy stone tops, glass fronts. Our logistics service covers packaging and container loading, sea, air and rail freight, customs paperwork and door-to-door delivery, but you should still confirm the delivery address access — lift dimensions, stair widths, or whether the run has to be delivered in sections and assembled on site. For a project outside China, agree Incoterms, insurance and the receiving contact at quotation stage rather than at dispatch.

Put installation and sign-off in the scope

A made-to-measure cabinet that is installed out of level will not close properly. Installation and after-sales support covers on-site fitting, inspection and snag lists, spare parts and maintenance; confirm which parts of your site we cover and who prepares the wall, floor and services beneath. Agree the sign-off list before handover: door alignment, drawer runners, lighting circuits, and finish condition after other trades have finished around it.

A short pre-production checklist

  • Survey: wall lengths, heights, floor levels, skirting, sockets and switches in the run.
  • Storage brief: what goes in, what goes on display, appliance positions.
  • Finish pack: door face, edge, carcass and countertop samples approved under site lighting.
  • Services: lighting channels, drivers, power and ventilation resolved on the drawing.
  • Freight: delivery access, section sizes, Incoterms and receiving contact.
  • Handover: installation scope and snag list agreed with both sides.

Where to see it built

If you want a worked example of the same approach across a whole floor, our mid-century whole-house custom cabinetry project covers a bay-window desk, staircase shelving and kitchen cabinetry measured on site, while this dark wood minimalist interior pairs a wall-mounted sideboard with floating shelves and a stone counter in an open dining area. For projects coordinating joinery with flooring, panelling and lighting from one supplier, our turnkey solutions cover villa, hospitality and office work from design through to handover.

Send your drawings or a room survey and we will return a specification and quotation for the run you need.