A glass front bar cabinet looks simple on a drawing and complicated on site. The glazing, the frame, the shelving behind it and the lighting inside all arrive from different line items, and a quote that lists only "1 set, as shown" hides most of them. Before you sign a purchase order for Santerson Glass Front Bar Cabinets, use the checklist below to make sure every item that affects price, fit and finish is actually written down.

1. Dimensions tied to your opening, not to a standard size

The product page for Santerson Glass Front Bar Cabinets describes the range as configurable, with made-to-measure sizing and project-tailored layouts rather than a fixed catalogue module. That means the number on the quote should be your site dimension, not a nominal one. Ask the supplier to show overall width, height and depth, plus the carcass depth behind the door frame, and confirm which figure the drawing was drawn to.

Then check what the quote excludes: skirting and architrave removal, floor build-up, plaster pack-out, and clearance for doors or drawers that swing past an adjacent wall. These are the items that turn a measured opening into a cabinet that no longer fits once the finishes are complete.

2. Glass type, thickness and edge detail

"Glass front" covers several very different products. Ask for the glass construction, the thickness, the tint or finish, and how the edges are treated. Tinted, frosted and clear glazing all change what you see through the door, and a ribbed or textured surface reads quite differently once the interior is lit.

If the cabinet sits at floor level or forms part of a larger run of built-in joinery, raise glazing safety with your supplier and confirm in writing which glass construction they are quoting for that position. Do not assume the standard door specification suits every location in the plan.

3. Frame material and finish schedule

Frame colour drifts between a sample card, a render and a photograph. Ask which material the front frame is made from and which finish system is applied to it, then request the finish reference by name or code on the quotation itself. A quote that says "black frame" or "bronze glass" without a reference is not comparable between suppliers.

Also check how the frame meets the glass: rebated, beaded or silicone-set glazing beads age differently and are cleaned differently. If your specification already uses aluminium-framed glass elsewhere in the project, ask for the same frame profile and finish family so the joinery reads as one design language.

4. Interior layout: shelves, fixings and load

Glass doors make every interior fixing visible. Confirm the number of shelves, whether they are adjustable, what material they are made from and how they are supported. Glass shelves need shelf pads and a stated load limit; timber shelves need to be thick enough not to bow under bottles and glassware.

State what the cabinet will actually hold. Stemware racks, bottle rows, decanters and bar tools each need different shelf heights and depths, and a layout drawn for display crockery will not serve a working drinks station without revision.

5. Lighting: specification or blank space

Most of the value in a glass front cabinet comes from what happens inside it, so treat lighting as a priced line item rather than an assumption. Ask whether the quote includes fixtures, drivers, wiring routes, a switch or sensor, and who supplies the electrical first fix on site.

If your project also specifies Santerson Integrated Cabinet Lighting, ask for the same lighting family across the joinery so colour temperature and dimming behave consistently from the kitchen run through to the bar unit.

6. Hardware and door operation

Hinges, handles, soft-close fittings and any motorised or sliding mechanism should be named on the quote with a brand or model reference where possible. A glass front door is heavier than a panel door of the same size, so hinge grade and quantity matter. Confirm the opening direction against your layout drawing before production starts.

7. Where the unit sits in the wider joinery package

A bar cabinet rarely stands alone. If the quote covers only one module, ask how it interfaces with adjacent units: shared carcass or separate cases, a common plinth or individual feet, and whether finishes are batched so that veneer and lacquer tones match across the run.

Where the bar is built into a kitchen island or a living wall, compare the standalone cabinet against Santerson Integrated Bar Systems, which is specified as a configurable system for residential living projects with project-tailored layouts. For a smaller footprint, Santerson Compact Bar Cabinets covers made-to-measure sizing in a tighter envelope. Quoting the wrong one of these three is a common and expensive mismatch.

8. Custom and OEM scope, minimums and lead time

SANTERSON's Custom & OEM Service page lists custom furniture design and prototyping, bespoke material finishes and textures, OEM manufacturing, flexible minimum order quantities and brand customisation. Treat that as a starting point and ask which of these your quote actually sits under, what quantity or value threshold applies, and how long prototyping and approval take before production begins.

Get the approval sequence in writing: shop drawing, finish sample, sign-off, production start. Any change after sign-off is where cost and schedule disputes begin, so record who can authorise a revision and what it triggers.

9. Packing, freight and site delivery

Glazed units need different packing than panel doors. Ask how the glass is crated, whether it ships assembled or knocked down, and which party carries risk in transit. The Logistics & Door-to-Door Delivery page describes freight forwarding by sea, air and rail, customs paperwork, packaging and container loading and shipment tracking; ask your contact to confirm the Incoterms, insurance cover and final delivery point for your specific order rather than relying on the general description.

Confirm the delivery address is a real access point for the crate size, and whether the cabinet arrives at the apartment door, the site gate or the kerb.

10. Installation, defects and after-sales terms

The Installation & After-sales Support page lists on-site installation, inspection and snagging, warranty coverage, spare parts and ongoing maintenance. Ask what is included for your project specifically: who fits the unit, who levels and fixes it to the wall, who glazes on site, and how replacement glass or a shelf is ordered later.

Ask for the warranty scope in writing — what it covers, for how long, and what is excluded — rather than accepting a general assurance.

11. A single comparable document

Finally, make sure the quote can be compared line by line against another one. It should carry the product name and page reference, your drawing number, dimensions, glass specification, frame material and finish code, interior layout, lighting, hardware, packing method, Incoterms, price validity and lead time. Anything missing from that list is a conversation you will have later at a worse moment.

For project-wide coordination — drawings, production coordination and on-site guidance across cabinetry, joinery and fit-out — the Turnkey Solutions pages describe villa, hospitality and office projects delivered end to end. Send your layout drawing with the questions above and you will get a quotation you can actually compare.

Send us your bar cabinet layout

Share your opening dimensions, preferred glass and finish, and what the cabinet needs to hold. We will confirm the specification, configuration options and a line-by-line quotation for your project.

SANTERSON  |  Phone / WhatsApp: +86-13928214007 (PHILLIP)  |  Email: santerson@qq.com  |  Contact us