A shaker panel wardrobe is one of the easiest built-in pieces to specify badly. The profile looks simple enough that buyers assume any joinery workshop can reproduce it, and then the quotation arrives with a door construction nobody explained, a board specification nobody chose and an internal layout copied from a showroom display. Before you place an order, work through the questions below. They are the ones that decide whether the wardrobe fits the room, survives daily use and lands on site as part of a wider fit-out.

Start with the door construction, not the colour

The defining feature of a shaker-style door is its frame-and-panel construction: a stouter outer frame surrounding a recessed centre panel. That construction is what gives the door its shadow line and its quiet, traditional look, and it is also where cost and quality diverge. Ask your supplier to state how the door is built for your order, and request a physical sample of the finished door so you can see how the profile reads under your own lighting. Our shaker panel wardrobe is part of the Classic Paneled Wardrobes collection, and its finish, layout and dimensions are specified to suit each space and project.

Then ask what happens at the edges. A wardrobe door in a busy bedroom or a shared family bathroom is an edge-treatment-and-hardware problem long before it is a style problem. Request the board type, the edge treatment and the surface finish by name, and ask for a physical sample of the finished door — not a flat swatch — so you can see how the profile reads under your own lighting.

Practical rule: if a quotation only says "shaker door, white", it is not yet comparable with another quotation. Ask for construction, substrate, edge treatment and finish to be written into the specification before you compare prices.

Confirm how the carcass is fitted to the actual room

Rooms are never square and ceilings are rarely level, and a built-in wardrobe has to absorb that. Our built-in wardrobe collections are made-to-measure: sizing, layout and finish are specified per project rather than selected from fixed widths. Ask how the carcass is levelled and scribed to the wall, whether a pelmet or filler panel is included at the ceiling line, and whether skirting is cut away or the unit is packed off it. Those details change the visible result far more than the door profile does.

Ask the same question about what sits above and beside the wardrobe. If the unit stops short of the ceiling, you are accepting a dust shelf; if it runs to the ceiling, someone has to resolve the junction on site. Specify who resolves it — the joinery supplier or your builder — in writing.

Design the interior around how you actually store things

A door profile does not determine whether a wardrobe works; the internal layout does. Before ordering, list what has to live inside: long hanging, short hanging for shirts and folded items, drawers for underwear and socks, shelves for folded knitwear, a section for luggage or an ironing board. Then ask the supplier to translate that into zones.

Ask for the internal layout drawn to scale with your wall dimensions, and ask specifically about hanging-rail heights, drawer depths and whether soft-close runners are included or priced as an option. Hardware quality is where a well-specified wardrobe and a cheap one part company.

Decide how much of the job you are buying

For a single bedroom replacement, you may only need doors and carcasses delivered. For a villa or apartment fit-out, ordering wardrobes separately from kitchen cabinetry, vanities and doors usually means three suppliers arguing about site dimensions. Grouping the joinery with the rest of the built-in furniture package keeps one party responsible for measurements, finishes and handover.

Ask whether the supplier also provides design support — space planning, layouts and 3D renderings before production — as our Interior Design Services do. A rendering you approve before manufacture is far cheaper than a correction made on site.

What to have confirmed in writing before production starts Why it matters
Door construction and profile detail Determines cost, longevity on tall doors and how closely the result matches the sample.
Substrate, edge treatment and finish Decides how the doors cope with cleaning and years of handling.
Site-measured dimensions and ceiling junction Removes the most common on-site argument between joinery and builder.
Internal zoning and hardware schedule Turns your storage list into a usable layout, and fixes soft-close items in the price before they become extras.
Delivery, installation and after-sales scope Tells you who unpacks, levels, hangs doors and returns for adjustments — see Furniture Installation and After-sales Support.

Match the finish to the rest of the joinery

Shaker doors are rarely a standalone decision. If the same room or apartment has cabinetry in matching tones, ask for the finish to be specified from one schedule across the whole package. Within our wardrobe range you can compare Oak Solid Wood Wardrobes against veneered and lacquered options such as Matte Finish Veneer Wardrobes, and see how the same paneled language reads on other door styles, from Raised Panel Wardrobes to Paneled Hinged Wardrobes. Ordering these from one manufacturer keeps the finish schedule, edge detail and ironmongery consistent across rooms.

If the project calls for something plainer than a paneled door — a flat, handleless front for a smaller bedroom — that is a different conversation, and it is worth having with the same supplier so both options are priced on the same basis. Our Custom Minimalist Bedroom Wardrobe page shows how a flat-panel alternative is specified.

Ask about manufacturing capability and minimums

For developers, builders and designers ordering wardrobes across several dwellings, ask whether the supplier can produce to your drawings rather than only to their own catalogue. A custom furniture manufacturer that works from design and prototyping through to production can match a specified profile and finish across a whole building, which is what keeps handover consistent from apartment to apartment.

Ask how many units are needed, whether mixed finishes within one order are accepted, and how prototypes or first-article doors are approved before the full batch is produced. Those answers shape your programme more than any catalogue discount.

Close out the commercial questions

Before signing, confirm what the price includes: site measurement, drawings for approval, packing, freight and installation. For overseas projects, ask how the joinery travels — container loading, packaging protection for doors, export documentation and delivery to the door — and who inspects on arrival. Ask which items are covered after handover and how adjustments and spare parts are handled, so that a misaligned door six months later is a warranty item rather than a new order.

If your project needs wardrobes alongside kitchen cabinetry, bathroom fixtures and flooring, sourcing them through one one-stop furniture and building materials supplier reduces the number of drawing sets, site visits and defect lists you have to manage.

The shortlist worth asking for

Take five documents with you when you compare suppliers: a measured room drawing, an internal zoning list, a door construction and finish specification, a hardware schedule, and a written scope covering delivery and installation. Any supplier who answers those questions cleanly will quote accurately the first time — and any supplier who hesitates has just told you where the problems will appear later.

Send us your room dimensions and storage list, and we will specify a made-to-measure wardrobe package with door construction, finish and internal zoning written into the quotation before production begins.