A quote that only lists a cabinet colour and a total price is not a quotation — it is an estimate with paperwork attached. When two buyers receive quotes from two different factories for the same Two Tone Matte Cabinets and the totals are far apart, you cannot tell whether one factory is cheaper or one quote is simply thinner. Before you sign anything, work through the seven line items below. Each one is a place where custom cabinetry gets re-priced after the order is placed.

1. Which surfaces are actually matte, and which are not

"Two tone" describes an arrangement, not a finish. A quote should name the finish of every visible surface separately: wall doors, base doors, drawer fronts, tall-unit panels, open shelving, and any glass or metal insert. In practice the two tones are usually split in one of three ways — light upper units against darker base units, wood-grain panels against a solid matte colour, or a matte body with a contrasting frame — and each split changes how many separate panel batches your order needs.

Ask the supplier to state, for each surface group, whether the finish is a matte solid colour, a matte wood-effect texture, or a mixed pairing. Our Grey Matte Cabinets and Wood Tone Matte Cabinets are listed as separate products for exactly this reason: the panel recipe is different, so it should be quoted separately. If a quote says "matte finish, two tone" as one line with no breakdown, request the breakdown before you compare it with anything else.

2. The exact colour and texture reference for both tones

Colour names are not specifications. "Taupe", "greige" and "warm grey" mean different things to three different factories, and a matte surface reads differently from a gloss one at the same RAL number because it scatters light instead of reflecting it. A usable quote carries a physical sample reference: a batch-approved board sample, a laminate or film code, or a signed-off colour card that both sides keep.

Two details matter more than the name. First, ask whether the wood-grain tone — if there is one — is a real veneer or a decorative surface on a board substrate; our Two Tone Veneer Cabinets and the lacquer and melamine equivalents in the same catalogue are different constructions with different prices. Second, ask for a sample of both tones together, side by side. Matte neutrals shift noticeably when one panel sits beside another under warm LED lighting, which is exactly the situation inside a kitchen.

3. Panel material, board thickness and edge treatment

The body of the cabinet is where a thin quote hides cost. Check four things in writing: the substrate used for doors and for carcases (they are often different), the board thickness for each, the surface treatment, and how the edges are finished. Edge banding quality determines whether a matte door keeps its line after years of cleaning in a humid kitchen, and it is invisible on a render.

On our Custom Built-in Kitchen Cabinets, the quote covers panel material, surface finish and matching hardware as separate items, because project buyers routinely want to move one of them without repricing the whole package. If a supplier refuses to separate these lines, they are effectively telling you that any later change will be settled by negotiation rather than by calculation.

4. Hardware: brand, model, and what is excluded

Hardware is the most common place where two quotes for "the same cabinets" are not comparable at all. One includes soft-close hinges and full-extension runners; the other includes unbranded hinges, and the buyer discovers the difference on site. Ask for hinge and runner brand and model, whether doors are soft-close or push-to-open, whether integrated handles are machined into the panel or added as a profile, and whether legs, brackets and connecting hardware are included or listed as extras.

Handleless work makes this sharper. Our Handleless Minimalist Kitchen Cabinets use machined panel profiles and soft-close fittings throughout, which means the door specification and the hardware specification have to be agreed together — a change to one moves the other. A quote that prices "handleless doors" without stating the opening mechanism is incomplete.

5. Dimensions, appliance positions and interface tolerances

Two tone matte cabinets are made to measure for a project, so the quote should be traceable to a drawing: overall run lengths, unit-by-unit widths, worktop height and depth, tall-unit heights, and the reserved positions and ventilation clearances for built-in ovens, refrigerators and dishwashers. Where a stone backsplash or worktop meets the cabinetry, the quote should say who supplies the interface and what tolerance is allowed.

This is also where an incomplete site survey shows up as a cost later. Before confirming, check that the drawing records out-of-square walls, floor levels, pipe and socket positions, and any services you intend to keep. Our Wood & Taupe Handleless Kitchen Cabinets are quoted against a confirmed layout with reserved appliance positions and internal partitions stated, because the internal storage plan is part of the panel count.

6. Scope boundaries: what is in the price and what arrives separately

Read the exclusions before the total. The items that most often fall between two suppliers are the worktop and backsplash, integrated appliances, sink and tap, lighting inside glass-fronted units, plinth and scribe panels, and delivery to floor level rather than to the building entrance. None of these is wrong to exclude — but they must be named, so you know who carries them.

For a package that travels internationally, also ask how the quote splits into shipments, whether packaging and container loading are included, and who prepares the shipping documents. Freight by sea, air or rail, customs paperwork and door-to-door delivery are described separately on our Furniture Logistics and Door-to-door Delivery service page, so buyers can price them against their own forwarder instead of accepting a bundled figure.

7. Lead time, payment terms and what happens after delivery

Tie the schedule to milestones rather than to a single date: drawing confirmation, sample approval, production start, inspection, dispatch. Ask which milestone restarts the clock if you change a colour or a dimension — on custom cabinetry, a late finish change usually re-enters the production queue, and the quote should say so plainly.

On payment, check what the balance is released against and what documentation accompanies it. After delivery, ask who handles installation, snagging, spare parts and replacement panels, and how a claim is raised. Our Installation & After-sales Support page sets out those stages so buyers can compare them line by line with what another supplier offers.

A short comparison exercise worth doing

Take the two or three quotes you have and put them into one table with these rows: finish per surface group, colour reference, substrate and thickness, edge treatment, hinge and runner model, opening mechanism, unit schedule reference, exclusions, shipment split, milestone dates, payment stages, after-sales scope. Any quote that leaves more than two rows empty is not comparable to the others yet, whatever its total suggests. Asking for the missing rows costs a supplier a day; discovering them on site costs a variation order and a delay.

If you want a quotation built to that structure — panel by panel, hardware by model, with exclusions named — send us your drawings through our Turnkey Interior Project Solutions service. We supply Custom Kitchen Cabinets for Residential and Hotel Projects to villa, apartment and hospitality projects, with made-to-measure sizing, finish options and a layout confirmed against your site conditions before production begins.