A two tone lacquer wardrobe can carry a bedroom scheme on its own: one door face in a deep, low-sheen colour, the other in a lighter neutral, with the lacquer finish giving the panels a smooth, uniform surface. The problem is not finding someone who can build it. It is finding a manufacturer who can hold that finish steady across a whole set of wardrobes delivered to one project, and who answers the same questions the same way when you compare three or four quotes.
The shortlist below is built from what procurement teams actually check before they place a joinery order — specification depth, batch consistency, documentation, and how the wardrobe arrives on site.
1. Confirm the manufacturer builds lacquer doors to order, not only to a catalogue
Many suppliers list a two tone range but produce it in fixed widths and fixed internal layouts. For villa and apartment fit-outs, wardrobe openings rarely repeat exactly: ceiling heights differ between floors, skirting and cornices intrude, and services run behind the wall. Ask directly whether the manufacturer makes the doors to your dimensions and whether they will redraw the internal layout around your storage plan.
On our own Two Tone Lacquer Wardrobes, sizing is made to measure, the material and finish are selected per project, and the layout is drawn to the room rather than picked from a set. That is the minimum you should expect from any supplier on your shortlist.
2. Ask how the two colours and the sheen are matched across the whole order
The failure mode with two tone lacquer is not the design; it is colour drift between panels. A wardrobe ordered in three batches, or with doors produced on different days, can show a visible difference in a pale neutral once installed side by side under bedroom lighting.
- Ask whether all door faces for one room are produced in one production run.
- Ask what they need from you to fix the colour: a paint code, a physical sample, or an approved panel signed off before production starts.
- Ask how sheen is specified. "Matte" and "high gloss" cover a wide range of surfaces between suppliers, so get a physical sample rather than a photograph.
If the supplier will not send a finished sample panel in your two colours, take that as a reason to keep them on the list but not at the top of it.
3. Check what sits behind the door face
A lacquer finish is judged at the front edge and in the way light runs across the panel, so the substrate and edge work matter as much as the colour. Shortlisting questions worth putting in writing:
- What board material is used for the door core and the carcass, and what is its moisture resistance for rooms against an external wall?
- How are edges finished — wrapped, painted, or banded — and what happens at cut-down sizes on site?
- What hinges, slides and handles are supplied, and can handleless or integrated-profile doors be specified?
- What internal fittings are included as standard: hanging rails, drawer banks, shelves, shoe trays, lighting provisions.
Suppliers who answer these with a specification sheet rather than an adjective are usually the ones whose drawings you can approve without a third round of revisions. Our Custom Minimalist Bedroom Wardrobe page is written that way on purpose: sizes, internal layout, door style and surface finish are all listed as items to be confirmed per project, because they change from room to room.
4. Compare how many trades the manufacturer can cover in one order
Wardrobes are rarely an isolated purchase. A bedroom floor usually needs the joinery, the wall panelling behind it, the doors to the ensuite, flooring underfoot and lighting above. Every additional supplier is another drawing set to reconcile, another delivery date to chase, and another party to point at when something does not line up.
A manufacturer who also produces matte lacquer wall panels, doors, engineered timber flooring and kitchen cabinetry can match finishes across those elements in one factory. That is a practical advantage, not a marketing line: the same batch of colour goes into the wardrobe doors and the panelling beside them.
If you are furnishing several apartments or villas at once, this also affects how variations are handled. One supplier holding all the joinery scopes can keep the two tone palette identical across units while changing only the internal layout to suit each bedroom.
5. Test their drawing and approval process before you commit
The cheapest quote becomes expensive when nobody has confirmed dimensions. Before placing an order, ask a shortlisted manufacturer to walk you through how they work. A supplier running a proper project process will move through the same stages: a brief and design proposal, then a quotation with detailed confirmation of sizes and finishes, then production, shipment and follow-up.
| What to ask | Why it matters |
|---|---|
| Who produces the shop drawings — your team or theirs? | Determines who carries the risk if a dimension is wrong. |
| Is a site survey or on-site measurement included? | Built-in wardrobes fail on existing-wall tolerances, not design intent. |
| What is signed off before production starts? | An approved drawing plus a finish sample protects both sides. |
| Who handles freight and delivery to site? | A wardrobe that arrives damaged or late stalls the whole fit-out. |
| What happens after handover — spares, adjustments, replacement parts? | Doors get adjusted after handover; the question is who does it. |
We handle this end to end for project clients: design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover. Ask any shortlisted supplier the same six questions and the differences between them become obvious within one round of emails.
6. Look at completed work in the same finish, not just renderings
Renderings flatter lacquer. Ask for photographs of installed two tone wardrobes taken after handover, ideally in rooms with the same orientation and lighting as yours. Then look at the details that reveal workmanship: how the door faces meet at the corner, whether the colour break falls where the drawing said it would, whether the panels sit flush with the wall and skirting.
Project references should name real sites you can ask about. Our project record includes villa and apartment work in Sydney, Melbourne, Perth, Willoughby and North Turramurra, alongside hotel and office projects. When a supplier cannot point to installed joinery in the finish you are buying, treat their sample as the only evidence you have — and price accordingly.
Before you send your drawings out: fix the two colours with a physical sample panel, confirm whether the wardrobe is built to measure or to a fixed module, and ask each supplier the same five questions about shop drawings, site measurement, freight and after-handover support. The answers usually cut a list of six down to two.
Send us your wardrobe elevations
We manufacture lacquer wardrobes, wall panelling, doors, cabinetry and flooring for villa, apartment and hotel projects, with made-to-measure sizing and finish options confirmed per project. Share your room dimensions and the two colours you are working with, and we will come back with drawings and a specification rather than a price range.
Contact PHILLIP — Phone / WhatsApp +86-13928214007, Email santerson@qq.com. Enquiries are answered within 24 hours, Monday to Saturday, 8:00 AM – 6:00 PM (GMT+8).