A floating TV unit rarely fails because of one dramatic mistake. It fails in small, expensive ways: a bracket that cannot carry the screen and cabinet together, a cable route that ends behind plasterboard, a veneer sample approved under shop lighting that reads completely different on site, or two suppliers quoting the same wall at two very different prices for reasons nobody wrote down. If you are buying made-to-measure media joinery from a China-based manufacturer for a villa or apartment project, the way you handle samples and proposals decides whether the job is smooth or expensive.

This guide covers what to ask for before you sample, how to test the samples properly, what has to be written in a proposal line by line, and how to compare two quotations honestly when the scopes are not identical on the surface.

Start with the wall, not the cabinet

Before any sample is requested, fix the conditions a floating unit has to survive. A wall-mounted piece carries its own weight plus the television plus whatever you plan to store inside it, and it does that over years of temperature and humidity change.

  • Substrate. Timber stud, steel stud, brick, double brick, or concrete. A fixing detail designed for one will not transfer to another without changing bracket type, embedment depth and blocking.
  • Screen size and mounting. Screen weight, VESA pattern, and whether the mount bolts into the same bearer as the cabinet or into a separate structure.
  • Services. Power, data, speaker cable and any low-voltage feed, with their positions marked on the drawing rather than decided on site.
  • Room environment. A living room, a bedroom and a coastal or poolside-adjacent space put different demands on board choice and edge sealing.

Our Floating TV Units are made-to-measure, so this information is the starting point of the enquiry rather than something that gets resolved after the order. Confirm dimensions and selected specifications for each project before a sample is treated as final.

What to request before you approve any sample

A sample that arrives without context tells you almost nothing. Ask for the following with it, and put the answers in writing so they become part of the proposal record.

  • Board substrate and thickness, plus the make and grade of the finish — laminate, lacquer, veneer, acrylic or melamine — stated by name, not by marketing description.
  • Edge treatment. Matching edge band, matched spray edge, or a wrapped profile. This is where cheap and mid-range work separate most visibly over time.
  • Back panel thickness and how it is fixed, because a thin unsupported back panel against a service wall causes noise and movement.
  • Hinge, runner and handle brand or specification, with soft-close stated explicitly where required.
  • The bracket or French-cleat arrangement for the floating support, and who supplies it — the cabinet maker, the screen-mount supplier, or the site contractor.
  • Lighting, if any. Where the driver sits, how it is accessed, and whether cabling is sleeved and drawn to a point.

Where integrated lighting matters to the design, our Integrated LED Media Units are specified with the same logic: lighting specification is confirmed as part of the unit, not added after production starts.

Test the samples in the room where they will be installed

A sample assessed on a light box is a decorative decision only. Do the checks that predict how the piece behaves.

  • Light. Tape the sample to the actual wall and look at it in morning, afternoon and evening artificial light. Veneer and metallic lacquer shift dramatically between sources.
  • Edge. Run a thumbnail along the edge join and check for a visible seam or adhesive line; on a floating unit that edge is at eye level from the sofa.
  • Colour match across materials. Compare the cabinet sample against the flooring, wall panel and any adjacent joinery you are also buying. Ordering each item separately from separate suppliers is the usual cause of a mismatch discovered at handover.
  • Hardware feel and travel. Open and close the drawer or door sample repeatedly. Runner travel and soft-close behaviour are hard to read from a datasheet.
  • Mark resistance. Wipe the sample with a damp cloth and check for swelling at any exposed board edge.
Approve samples against a drawing, not against a photograph. A reference image from a showroom or a social feed is not a specification; it usually hides the fixings, the cable route and the reveal between cabinet and wall.

Read the proposal line by line

Most price differences between two credible suppliers are scope differences. Before comparing numbers, make sure both proposals answer the same questions.

Proposal itemWhat a usable line should state
DimensionsOverall width, height and depth; wall-mounted bearer position; clearance from floor to underside of the floating unit.
SubstrateBoard type and thickness for carcase, doors and back panel — not one generic "board" line.
FinishNamed finish with sample reference number and the approved sample date.
HardwareBrand or model for hinges, runners and handles; soft-close included or excluded.
FixingsBracket system, load assumption, and who is responsible for the wall blocking and its installation.
ServicesCut-outs, cable routes, grommets, power point positions and any lighting cabling shown on a drawing attached to the quote.
PackagingPanel-by-panel packing list, protection of finished faces, and whether the unit ships assembled or flat-packed.
Delivery termsIncoterms and delivery address, who handles customs clearance and duties, and the final delivery point — kerbside, floor level or room of installation.
Site workWhether installation, snags and making good are included or left to the local contractor.
After-salesWhat is covered for transit damage, what evidence is required, and how replacement panels are produced and shipped.

If any row is missing from one proposal, treat it as excluded until the supplier confirms otherwise in writing. That single habit removes most of the arguments that appear after an order is placed.

Compare like with like

Once both quotations answer the same questions, compare them on four axes instead of headline price.

  • Specification depth. A proposal that names substrate, hardware and fixing detail carries less project risk than a cheaper one written in general terms, because the gaps get solved later with variations.
  • Scope boundary. Note exactly where the supplier's responsibility ends and the site builder's begins — usually at wall blocking, electrical first fix and making good.
  • Consolidation value. A floating TV unit is rarely bought alone. If the same manufacturer also supplies the adjacent joinery, flooring or wall panels, one coordinated order reduces finish mismatch and shipping handling.
  • Change control. Ask how a dimension change or finish change after approval is priced. Late changes are normal on live projects; an unclear variation process is what turns them into disputes.

For a wall that carries the screen, storage and display in one composition, our Wall Mounted Media Walls are specified with mounting and storage requirements confirmed per project, which is also the cleanest way to get a comparable quote.

Five questions that separate suppliers quickly

  • Can you supply a sample of the exact finish and edge detail, referenced to the drawing?
  • What bracket system do you use for a floating unit on my substrate, and what load does it assume?
  • Which drawing revision will you manufacture from, and how are changes after that revision priced?
  • Who installs the wall blocking and who makes good around the cut-outs?
  • If a panel arrives damaged, what is the replacement route and who pays freight?

Answers that are specific and documented are worth more than a lower number with vague terms. That is true whether you are fitting one apartment or furnishing several villas at once.

A short pre-order checklist

  • Wall substrate and blocking confirmed on site drawings.
  • Screen weight and VESA pattern supplied to the cabinet maker and the mount supplier.
  • Sample approved in situ, with sample reference and approval date recorded.
  • Named finish, substrate, edge treatment and hardware on the quotation.
  • Bracket system and load assumption stated.
  • Cable routes, cut-outs and power positions shown on an attached drawing.
  • Incoterms, delivery point and customs responsibility written in the order.
  • Variation pricing agreed before production starts.

If you want to brief a made-to-measure piece for a residential or villa project, send the wall elevation, screen details and finish references with the enquiry. You can reach us through the contact page, and we will confirm dimensions and selected specifications before sampling.