A niche shelf looks simple on a drawing: a recess in the wall, two or three shelves, maybe some lighting behind it. The quotation is where projects stall. One buyer sends "1.2 m niche, oak finish"; another sends a marked-up elevation with reveal depths, shelf spans and a switch location. The second enquiry comes back with a firm price. The first comes back with questions.

We manufacture custom cabinetry and built-in joinery in China as part of a one-stop furniture and building materials range, and the pattern we see is consistent: the enquiries that carry complete information are the ones that move into production. Below is what we need to quote niche shelving properly, written so you can send it in one message instead of five.

1. The opening, not just the width

Give us the finished opening: width and height, plus the reveal depth — how far back the niche sits from the finished wall face. A niche framed out in drywall behaves differently from one cut into masonry or cast into a wet-area wall, and that changes both the carcass build and how the shelves are supported.

Tell us whether the opening already exists or is still being set out. If it is still open, we can advise on dimensions before the wall closes; if it is built, send the measured opening sizes and note any deviation from drawing, because site openings rarely match the sheet exactly.

2. What the shelves have to carry

Shelf span and load decide shelf thickness and whether a hidden support or intermediate carrier is needed. Books in a library wall, ceramics on a display niche, towels and glassware in a bathroom, or light decorative styling are four different specifications.

Send the intended use and, where possible, the heaviest item that will sit on the shelf. Our niche shelving is made to measure, so span, thickness and material are set around the load rather than fitted to a stock size.

3. Fixing method and what is behind the wall

This is the item most often missing from an enquiry. Tell us the wall construction — stud and plasterboard, brick, concrete, tile over render — and whether noggins or blocking have been installed at shelf levels. Where nothing has been built in, say so; we will specify the fixings and the support detail instead of guessing.

In wet areas, also confirm waterproofing status and whether the niche is tiled through the reveal. A tiled recess needs different edge details from a painted one, and it is far cheaper to resolve on paper than on site.

4. Finish and how it must match the rest of the joinery

Send the finish requirement in one of three forms: a material we already work with, a sample reference, or the existing product your niche has to sit against. A niche read as part of a wider wall — media unit, wardrobe, vanity or full-height storage — should match the surrounding panels in colour, grain direction and sheen.

If the niche is part of a larger built-in scheme, send the whole elevation rather than the niche alone. That is how we keep open display niches consistent with the closed storage around them, so the shadow gaps, rebates and trims line up across the wall.

5. Lighting, switches and services

If the niche is lit, we need to know before the carcass is built: where the fitting sits, how it is switched, whether a driver has to be concealed, and whether power has already been pulled to the position. Integrated lighting changes the panel build — cable routes, drilled outlets and an access point for replacement.

Send electrical specifications with the rest of the enquiry rather than after the order. Our integrated cabinet lighting options are configured with the cabinetry, so ratings and compatibility are confirmed at quotation stage.

6. Quantity, location and delivery terms

Per-unit pricing depends on quantity across the project: twelve identical niches in a hotel corridor price very differently from one feature recess. Confirm the room or unit type each niche belongs to, total count, and whether any openings differ.

Then give us the delivery address, the access conditions — lift, stair, loading dock, crane — and your preferred shipping terms. We arrange freight and door-to-door delivery alongside production, so knowing the destination early lets us quote the whole package rather than the crate alone.

A short checklist before you hit send

  • Finished opening width and height, plus reveal depth
  • Wall construction and whether blocking is present at shelf levels
  • Intended load per shelf and clear span between supports
  • Finish requirement, or the existing joinery it must match
  • Lighting type, switch position, and whether power is already in place
  • Quantity by room or unit type, with any variations marked
  • Delivery address, site access, and preferred shipping terms
  • Programme date — when the joinery is needed on site

If you have drawings, send them with the measurements taken on site; if you only have photographs and a tape measure, send those instead. Send your enquiry through our contact page and we will come back with the specific gaps in your information rather than a generic price range.