A request for quote that lists only "bookshelf, 2.4 m, white" will get you a price, but rarely a comparable one. Two suppliers can quote the same wall of open bookshelves and produce numbers that differ by a wide margin, because the missing details in the brief become different assumptions in the workshop. The buyer then compares quotations that were never for the same product.

The fix is not a longer enquiry. It is an enquiry that answers, up front, the questions a manufacturer would otherwise have to guess: where it stands, what it carries, what it is made of, how deep the shelf is, and who puts it on the wall. Below is the checklist we use when preparing quotations for custom built-in shelving, together with the reasons each item changes the price.

1. Room dimensions and the constraint that shapes the unit

Send the wall width, wall height and depth available, plus a sketch or a photo with measurements marked on it. A dimensioned drawing is worth more than any written description, because it shows what a specification list hides: the downlight in the ceiling that stops a unit from running full height, the skirting that forces a cut-out at the base, the radiator or switch plate that has to be worked around.

State clearly whether the unit is freestanding against the wall or fixed between floor and ceiling. A floor-to-ceiling bookshelf is a different build from a bookcase that stops below a cornice: it needs an adjusted scribe to a ceiling that is never perfectly level, and in a project with several rooms it usually means field measurement before production rather than a standard catalogue height.

Also give the room's floor finish and whether the unit must sit flush with adjacent joinery. Where bookshelves are designed as part of a run that includes wardrobes, media units or window seats, say so in the first message. Mixed runs are quoted and produced differently from standalone pieces.

2. What the shelves will actually carry

This is the item most often left out, and it is the one that most affects both cost and whether the finished unit performs. Books are heavy: a metre of hardback paperbacks loads a shelf far more than the same metre of ornaments and storage boxes. Tell the manufacturer what goes on the shelves, because that determines the clear span between uprights, the shelf thickness, and whether a span needs a intermediate support or a stiffer substrate.

  • Books along a long span — request shorter bay widths or ask for a mid-span divider rather than accepting a wide open shelf that will sag over time.
  • Display objects, ceramics, awards — say so, because these usually call for adjustable shelving and sometimes integrated lighting to make the display readable.
  • Media and equipment — a unit holding a television, console or receiver needs cable routes, ventilation behind the equipment and a surface rated for the load; this is closer to a full height media wall than to a simple bookcase.
  • Mixed storage — if part of the run will be closed to hide clutter and part left open for display, say which split you want; closed bookshelves and open ones are quoted on different rates.

Ask the manufacturer to confirm the load rating they design to for each shelf depth, in writing. If a supplier cannot answer that question, they have not engineered the shelf — they have cut a panel to size.

3. Shelf adjustability and the vertical grid

Specify whether shelves are fixed or adjustable, and if adjustable, how they adjust. A system of rows of pins in drilled holes is inexpensive but leaves visible holes on the side panels; a routed groove or a hidden bracket gives a cleaner face and costs more. Give the shelf spacing you want where content height is known — a tall stack of art books needs a different pitch from paperbacks.

For project work, request that the vertical grid be drawn out on elevation before production. It settles, in one document, how many shelves there are, which ones are fixed, and where lighting or equipment interrupts the run. Revisions after drawings are agreed cost far more than revisions before.

4. Materials, substrate and finish

"Wood" is not a specification. A quotation should name the substrate and the surface separately, because two units that look identical in a photograph can be built on very different cores with different behaviour in service.

ElementWhat to specify in the RFQ
SubstrateBoard type and thickness for carcass, doors and shelves — for example a furniture-grade panel core rather than an unqualified "board". State the shelf thickness you expect.
SurfaceLacquer, laminate, veneer or paint, and whether the finish is matte, satin or high gloss. High gloss shows fingerprints and handling marks in a busy house; matte is more forgiving.
Edge treatmentHow edges are finished — matching edge banding, solid lipping, or a mitred wrap. Exposed edges on adjustable shelves take the wear, so this is not a cosmetic detail.
Colour referenceA named standard reference or a physical sample, never a screen colour. Where the unit must match existing joinery, send a sample of that joinery.
Back panelThickness and fixing method. A thin back panel pinned to an open frame racks the unit; a housed or rebated back adds stiffness.

Where the piece sits in a project that already has a finish schedule — a villa with specified wall panelling, doors and wardrobes — send the schedule. A manufacturer working to a whole-house palette can match veneer tone and lacquer sheen across trades; one working from a single product photo cannot.

5. Configuration: open, modular or glass-fronted

Decide the configuration before you ask for a price, since each has its own cost drivers and its own detailing.

  • Fully open shelving — the lowest-cost option per linear metre, but dust settles on everything and the styling of what sits on show becomes part of the interior permanently.
  • Glass-fronted units — a glass front bookshelf protects contents and reads as display joinery. Specify the glass type, whether the front is hinged or sliding, and how the frame meets the shelf face.
  • Modular systems — modular bookshelf systems suit a wall that will change over the years, or a project where several rooms share one grid. Price them as a system with defined module widths and heights, not as a set of loose parts.
  • Wall-mounted shelving — for lighter duties, wall mounted shelves avoid a floor footprint. The quotation should state the fixing method and what substrate they are designed to be fixed into; a bracket rated for stud wall is not the same as one rated for masonry.

6. Lighting, hardware and accessories

Integrated lighting has to be decided at the design stage, not added after the carcass is built. If you want shelf or niche lighting, ask for integrated cabinet lighting to be quoted with the unit, and specify where the transformer sits, how the fitting is serviced, and what cable provision is made inside the carcass. Also state the colour temperature you want, since warm light on a shelf changes how both the books and the finish read.

For doors and glass fronts, name the hardware: hinge type, soft close or not, handle or push-open, and whether the supplier is providing it or the site's ironmonger. Accessories such as timber trim, light covers and display plinths are small items that get left out of a low quotation and appear later as variations.

7. Quantity, phasing and site context

Give the quantity in rooms or linear metres, not just pieces. A single bookshelf and twelve identical units across guest rooms price differently: repeat production, shared settings and one container of freight all work in the buyer's favour when they are known at quotation stage.

State the destination country and delivery address, whether the goods go to a site or to a warehouse, and any access constraints — service lifts, narrow staircases, a basement room with a low doorway. Large built-in sections may need to be delivered in demountable parts and assembled in place, which changes both the build detail and the installation allowance.

8. Delivery terms, drawings and installation

Ask explicitly for these in the quotation, so that responses can be compared line by line:

  • A set of shop drawings or a 3D rendering before production starts, with your sign-off recorded.
  • The trade term quoted — factory, port or door-to-door — and what is included in it: freight mode, insurance, customs paperwork, and who clears the goods on arrival.
  • Packaging specification and how the shipment is broken into consignments, plus a packing list that names each crate against its room.
  • Whether installation is supplied, whether an installer attends the site, or whether the goods ship with fixing drawings for a local joiner.
  • The warranty period, what it covers, and how replacement parts — shelf pins, hinges, a damaged panel — are supplied after handover.

A quotation that lists these is longer to read but far easier to compare. A quotation that gives only a total for "1 set bookshelf" tells you nothing about what happens between payment and handover.

How the comparison should be run

Send the same pack — dimensioned drawing, use case, material schedule, quantity, destination — to each supplier and ask them to price against that pack rather than to propose their own. Then compare what each one assumed. Differences in price usually trace back to a difference in substrate, shelf thickness, edge treatment or installation scope, and once you can see that, the cheapest quotation is often not the cheapest project.

Where a manufacturer offers custom and OEM work, expect them to come back with questions rather than an instant figure. That is a good sign: it means the unit will be engineered for the loading and the opening you described instead of cut from a standard size.

Frequently asked questions

Is it better to send a drawing or a written specification?

Both. The drawing shows the constraint — ceiling height, skirting, adjacent joinery, the position of switches and lights — and the written specification fixes the material, finish and loading that a drawing does not state on its own.

Why do two quotations for the same bookshelf differ so much?

Almost always because of items the enquiry left open: substrate and shelf thickness, span between uprights, edge treatment, whether lighting and hardware are included, and whether delivery is to port or to site. Fixing those details before asking for a price puts every supplier on the same basis.

Should I specify load capacity if the shelves are for decoration only?

Yes. Even decorative shelving needs a stated span and shelf thickness, otherwise the manufacturer will use the thinnest panel that passes visually. A long unsupported shelf loaded with books behaves very differently from the same shelf holding a few ornaments.

Before you send the enquiry: confirm the wall dimensions and ceiling constraint, decide what the shelves will carry, choose open or glass-fronted, name the substrate and finish, and state the destination and delivery term. Those five decisions do most of the work in turning a rough price into a comparable quotation.

SANTERSON manufactures custom built-in furniture and building materials for villa, hospitality and office projects, with made-to-measure sizing, material and finish options, and layouts drawn to suit each space. Send your drawings, room list and destination country to SANTERSON, and we will quote a made-to-measure open bookshelf against the specification you provide.