A swim spa is one of the few outdoor amenities on a resort, clubhouse or villa spec that has to survive weather, near-daily use and an unattended plant room at the same time. That is why the proposal you receive matters more than the brochure photograph. Below is how we suggest reading a quotation for Outdoor Swim Spa WS-S12-T line by line, so the number you sign is the number your site actually operates.

Start with what the model designation commits you to

WS-S12-T sits in a configurable outdoor swim and hydrotherapy range, and the "T" refers to the swim training system that appears in its specification. The closest catalogue neighbour, WS-S12, shares the same shell dimensions and pump set but does not list that system. If two quotations for what looks like the same tank come in at different prices, this option is usually where the difference sits — so ask which line items create it before you compare totals.

The catalog dimensions are 11740 × 2200 × 1470 mm. Treat those as the manufactured unit, not the pit or the deck. For a commercial installation you need to confirm drainage, an equipment access route, and clearance for the control system before the civil works are drawn.

The specification block worth checking line by line

Catalog dimensions11740 × 2200 × 1470 mm
Swim training system1 set
Water pump2 pcs
Filter pump1 pc
Jet total73 pcs
Control system1 set
LED lighting1; 50 small LED lights
Total power7.65 kW (catalog figure for the listed configuration)
Features shownWater jets, LED lighting, Ozone, Swim training system

Two of these lines need a written answer from the supplier rather than a checkbox. First, total power: 7.65 kW is what the catalog states for the configuration as listed. Add a heat pump and the electrical service changes completely, so get the connected load and the recommended supply for your exact option set in writing before an electrician prices the switchboard. Second, jet count: "73 pcs" is a total across zones. Ask for the layout drawing showing where they sit relative to the swim channel and the seating area, because that determines whether the hydrotherapy zone works as designed.

Options change both price and running cost

The catalog lists control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps as options. Availability and compatibility vary by model, so confirm each one against WS-S12-T rather than assuming the whole list applies. For a commercial site, three of them usually decide the operating budget:

  • Heat pump. Determines whether the spa is usable outside peak season, and it is the single largest addition to connected load.
  • Insulation. Affects how long the water holds temperature overnight between clean-down and morning use — relevant on sites with early closing.
  • Filtration type. The specification lists one filter pump; sand filtration is a separate option. Decide which one you want, because maintenance labour and consumables differ.

Ozone is shown as a standard feature on this model. Ask what it is specified to do in your duty cycle and what consumables it needs annually — sanitisation method drives both chemical spend and how often staff touch the water chemistry.

Ask for the proposal in a form you can compare

Most procurement problems on projects like this come from proposals written at different levels of detail. Request the same structure from every supplier:

1. Base unit with the exact model code, so WS-S12-T is not substituted by a shell-only variant.

2. Every option listed separately with quantity, including pumps and sterilisation.

3. Connected load and recommended electrical supply for that configuration.

4. Delivery scope — where the unit lands, what it arrives on, and what site access it assumes.

5. What is excluded: crane, civil works, deck finishes, local electrical connection, commissioning.

6. Spares and service terms for pumps, jets, control system and lighting.

Rule of thumb: if a quotation does not state the connected load for your selected options, it is not yet comparable with any other quotation.

Buying it as part of a wider package

On resort and villa projects the swim spa rarely sits alone. Poolside loungers, shaded pergolas, changing-room joinery and wet-area finishes all get specified around it, and coordinating them with one supplier removes a large share of the interface risk. As a furniture and building materials manufacturer, we supply outdoor furniture, interior fixtures and finish products alongside the swim and hydrotherapy range, which lets pool deck, landscape seating and adjacent interiors be coordinated through one specification and one delivery programme. Our swimming pool category also includes longer swim spas with a separate relaxation channel and compact hot tub formats, which are worth comparing against WS-S12-T if your site needs distinct exercise and soaking zones rather than one combined tank.

Send us the available deck or plot dimensions, expected daily bather load, target water temperature and your local supply details, and we will return a configuration for WS-S12-T with each option priced separately — including the electrical figures your consultant needs to sign off.