A walk-in wardrobe package rarely decides a project on its own, yet an open walk in wardrobe proposal can quietly carry cost and programme risk for months. When doors, hardware, lighting and internal fittings are removed from the specification, the remaining scope has to be described with unusual precision: what is being supplied, how it will be fixed, who coordinates it with flooring and ceiling, and how it will be inspected on site.
Before comparing prices, ask the supplier to state, line by line, which wardrobe elements are included in the quoted price and which fall to the main contractor. If that split is not written down, the cheapest proposal usually turns out to be the most expensive one by the time variations arrive.
What an Open Walk-in Wardrobe Proposal Actually Covers
Open wardrobe systems are built-in furniture: carcasses, shelving, hanging zones, drawers and sometimes integrated lighting, installed without doors across the front. In apartment blocks, serviced apartments, villa portfolios and hospitality room zones, they are chosen because they reduce hardware count, keep circulation feeling wider in compact bedrooms, and let a design studio control how the storage reads as part of the wall.
That simplicity is also where proposals go wrong. A doorless run exposes every edge detail, every shelf span and every fix to the surrounding finishes. A proposal that looks complete on a furniture schedule may still leave the interface with engineered flooring, skirting, ceiling cornices, sprinkler heads and room lighting undefined.
SANTERSON supplies these systems as made-to-measure built-in furniture within a wider package of cabinetry, doors, wall panelling, flooring, lighting and sanitary fixtures. That matters when evaluating a proposal: wardrobe runs are easier to coordinate when the same manufacturer is also producing the adjacent joinery and finishes, because one drawing set governs the whole room.
Read the Scope Split Before the Price
Every serious proposal should separate supply from site responsibility. Put the two columns in front of your project manager and check that nothing sits in the gap.
| Item in scope | What a complete proposal states |
|---|---|
| Carcass and shelving | Panel thickness, edge treatment on visible faces, shelf spans and load assumption, adjustable or fixed shelves. |
| Hanging configuration | Rail positions, single or double hanging heights, trouser and shoe provisions, mirror or rail accessories. |
| Finish schedule | Board material, surface finish and colour reference for interior and exterior faces, plus who approves the physical sample. |
| Fixing method | Wall fixing type relative to wall build-up, floor protection, tolerance allowance for out-of-plumb walls. |
| Integrated lighting | Whether profiles, drivers and switching are included, and which trade provides the electrical first fix. |
| Interfaces | Skirting, flooring threshold, ceiling junction, adjacent door lining — named as a scope item, not left to site. |
| Site programme | Survey date, shop-drawing submission, production window, delivery sequence, installation crew and snag stage. |
If any row is answered with "site to provide" without a named responsible party, treat it as an open commercial risk rather than a technical detail.
Six Questions That Separate Suppliers Quickly
1. Who surveyed the openings?
Made-to-measure built-in storage is only as good as its survey. Ask whether dimensions were taken on site after the wall and floor finishes were set out, or taken from drawings. Drawings alone rarely account for floor build-up, and a run specified from a drawing will be re-made.
2. Are shop drawings part of the price?
For multi-unit projects, production should start only after signed shop drawings. Confirm that elevation drawings, plan sections and finish callouts are included in the quoted amount, and that a revision round is allowed before production release.
3. What happens to sample approval?
Open wardrobes show their interior surfaces constantly, so board colour and edge banding are visible decisions. A supplier who provides physical finish samples for sign-off removes a common source of disputes at handover.
4. How is the wardrobe coordinated with adjacent joinery?
Ask how the proposal handles the junction with kitchen or vanity cabinetry, door linings and wall panelling in the same room. Where one manufacturer supplies several elements, alignment of reveals, shadow gaps and finish tones becomes a single coordination task instead of three.
5. What is delivered, and to where?
For projects sourcing from overseas manufacturers, clarify whether the price covers packing, container loading, freight, customs documentation and delivery to site or to port. Ask how shipments are sequenced so that joinery does not arrive before the rooms are ready to receive it.
6. Who installs and who signs off?
Open wardrobe runs are inspected closely, so installation quality is visible from day one. Establish whether installers come with the shipment or whether local labour is engaged, and what inspection and snag process follows installation.
Comparing Configurations: What to Line Up Side by Side
Once scope is normalised, compare the configurations themselves. Within SANTERSON's built-in furniture range, three directions recur in project enquiries:
- Open walk in wardrobes for dedicated dressing rooms and larger bedroom zones, where the run wraps a room and becomes the organising element of the space.
- Minimalist open wardrobes for compact guest rooms and serviced units, where clean lines and a restrained profile keep a small room readable.
- Freestanding open wardrobes where built-in fixing to the structure is restricted, or where the layout may need to change later in the asset's life.
Across these, dimensions, layout and finish are specified per project rather than chosen from a fixed catalogue size. That is exactly why two proposals that appear identical on a schedule can carry very different amounts of engineering behind them.
Evaluate the Proposal as Part of the Whole Fit-out
Wardrobe packages are usually bought alongside other built-in elements, and a supplier's ability to produce them together changes the coordination load on site. When cabinetry, doors, panelling and custom furniture manufacturing come from one source, tolerances between adjacent elements are resolved in the factory rather than discovered by an installer with a silicone joint.
For projects that need several trades consolidated, turnkey interior project solutions covering design coordination, production, logistics and installation give a single point of accountability across the fit-out. The evaluation then shifts from "is this wardrobe cheap?" to "does one party own the whole joinery package through handover?".
SANTERSON's published project work includes villa and apartment schemes in Willoughby, Perth and North Turramurra in Australia, alongside hospitality and office projects. Those references are useful for judging whether a supplier has delivered joinery packages to Australian sites; ask specifically which scope they covered on each case before treating the reference as comparable to yours.
A Pre-Award Checklist
- Scope split between supplier and main contractor is written out, item by item.
- Shop drawings, sample approval and one revision round are inside the quoted price.
- Panel thickness, edge treatment and finish references are stated for interior and exterior faces.
- Fixing method matches the actual wall build-up and floor finish on site.
- Interfaces with flooring, skirting, ceiling, doors and lighting are named scope items.
- Delivery location, Incoterms and shipment sequence are confirmed in writing.
- Installation responsibility, inspection stage and snag process are defined before award.
A proposal that answers all seven lines can be compared honestly against its competitors. One that does not should be sent back for clarification — the questions cost nothing at tender stage and everything after production starts.
Send the drawings, get the scope split back
Share your room layouts and finish intent with SANTERSON's project team, and ask for a written breakdown of what is included in an open walk-in wardrobe package — survey, shop drawings, production, delivery and installation — before you compare it with any other quotation.