Glass and glossy wall panels look effortless once they are on the wall. The work that makes them look effortless happens long before the first panel arrives: measurement sign-off, packaging decisions, delivery sequencing and a site that is actually ready to receive them. If you are specifying Santerson Glass & Glossy Panels for a villa or apartment fit-out, this article walks through the delivery and installation planning steps that keep the finish clean and the programme on track.
Start with what the product actually needs
Santerson Glass & Glossy Panels sit in the Paneling Systems collection and are supplied to project-specific dimensions, with finish and layout chosen per space. That made-to-measure approach is exactly why delivery planning cannot be an afterthought: panels are cut for particular walls, so a measurement error discovered at handover is not something you can fix on site with off-the-shelf stock.
Before anything ships, confirm the following in writing:
- Final wall dimensions and datum lines, taken from the finished floor and finished wall faces rather than structural shells.
- Panel layout drawing showing joint positions, cut pieces, and how each panel relates to doors, skirting, switch plates and built-in furniture.
- The selected glass or glossy finish for every elevation, including any matte lacquer or textured panels that meet the glossy surfaces at a reveal.
- Fixing method and substrate preparation, so the wall is ready before the crates land.
- For glass components, the glass type and any safety requirement agreed for the location in question.
These are the same coordination steps described on our interior design and project service pages: brief and design proposal, quotation and detail confirmation, then production, shipment and follow-up. Getting the drawing signed off at stage two is what makes the delivery stage predictable.
Sequence the delivery around the wet trades
Glossy surfaces show dust, adhesive residue and every careless boot. The single most useful scheduling decision is to keep panel delivery after the messy work in that space is finished: plastering, painting, flooring, tiling and joinery installation should be complete and cleaned, and the site should be dry and enclosed.
| Delivery window | What must already be true on site |
|---|---|
| Early, alongside cabinetry | Only sensible when panels are protected in place and the remaining trades work around them. Expect extra protection cost and higher risk of damage. |
| After wet trades, before loose furniture | The usual choice. Walls are finished and dry, floors are protected, and the panels go in before soft furnishings arrive. |
| Final package on site | Lowest handling risk, but leaves no slack if a replacement piece is needed. Only use this when measurements have been re-verified after the finishes were installed. |
For multi-apartment or multi-villa work, deliver one unit or one floor at a time rather than the whole order in one drop. A single crate at a time is easier to store, inspect and install, and any discrepancy surfaces while there is still time to correct it.
Plan the logistics as carefully as the layout
Our logistics and door-to-door delivery service covers freight forwarding by sea, air or rail, customs paperwork, packaging and container loading, shipment tracking and delivery to the site. For panel work there are a few practical points worth agreeing with your freight forwarder before the container is loaded:
- Access. Check crate dimensions against the lift car, stairwell turns, doorway widths and any gate at the property. A crate that will not fit the lift becomes a crane or manual-handling problem on delivery day.
- Storage. Nominate a dry, level, covered holding area close to the installation zone, with panels stored upright as labelled and never leaning against an unfinished wall.
- Labelling. Each crate should be marked with the room or elevation reference that matches the approved layout drawing, so installers are not guessing which piece belongs where.
- Inspection on arrival. Open and check glass and high-gloss panels in daylight while the packaging is still available, and photograph any damage before signing off the delivery.
Import terms, duties and transit arrangements differ by country and by order, so confirm those details for your specific project rather than assuming a standard set of conditions.
Installation day: what good preparation looks like
Our installation and after-sales support service covers on-site installation, inspection and snags, warranty coverage, spare parts or replacement, and ongoing maintenance. To make that visit productive:
- Confirm the wall substrate is prepared as specified, and that services, sockets and any integrated lighting are first-fix complete and tested.
- Let the space reach its normal condition before installation — temperature and humidity should be stable and the site should have been cleaned of construction dust.
- Keep one approved layout drawing on site as the reference, and record any field change against it the same day.
- Walk the completed panels with the installer before anyone leaves, marking snags while access is still easy.
If your scheme also includes glass sliding panels, track and hardware need the same level of planning. Floor levels, threshold details and clear opening widths should be checked before the frames are made, because sliding components expose level tolerances that fixed cladding hides.
Handover and after
At handover, keep a simple record: the approved layout drawing, the finish reference used for each elevation, crate labels, delivery photographs and any snag list with its resolution. That file is what makes later maintenance or a replacement panel straightforward, since panels are made to measure for your walls.
Santerson works as a one-stop furniture and building materials supplier, so wall panels can be coordinated with the cabinetry, doors, wardrobes and interior fixtures in the same project — which usually means fewer site programmes to run and fewer trades waiting on each other.
Send us the drawings and room list for your project and we will confirm panel sizing, finish options, packaging and a delivery sequence that fits your site programme. Contact: PHILLIP, +86-13928214007, santerson@qq.com.