A flush interior door looks simple from the front: a flat leaf, a concealed frame, no visible architrave. That simplicity is exactly why two quotations can look identical on paper and behave very differently on site. If you are comparing Santerson Flush Interior Doors alongside another offer, the way to make them comparable is to insist on the same sample set and the same proposal detail from both suppliers before price enters the conversation.

Start with what a sample can actually prove

A door sample is not a miniature version of the finished product, so decide in advance which questions a physical piece can answer for you. Surface and edge detail travel well: paint or laminate colour under your own site lighting, the grain direction of a wood veneer, whether an edge is a clean machined arris or a slightly rounded filler line, and how a handleless routing reads once your hand touches it. Flatness across the visible face also shows up in a sample, along with how the finish wraps around the corner.

What a small sample cannot prove is opening behaviour, acoustic performance, or how the leaf meets a finished wall on a real storey height. Those belong in the written proposal and in shop drawings, not in a box that arrives by courier. Splitting the evidence this way stops you from paying for a heavy sample and still discovering the frame detail at handover.

Request the same three items from every supplier

Ask each quotation source for an identical set so nothing has to be guessed. First, a finish board or leaf offcut in the exact specified surface, labelled with the finish code rather than a colour name. Second, a corner or section specimen that exposes how the leaf is built and how the chosen edge treatment is executed. Third, a marked-up opening detail showing the concealed frame, the wall build-up it sits inside, and where the door stops relative to the finished wall face.

For a run of doors rather than one opening, also ask which items in the range share a construction. Santerson's Santerson Flush Hinged Doors cover the swing application, while Santerson Flush Sliding Doors suit openings where swing clearance is the constraint. Comparing a hinged sample against a sliding quotation without noting the hardware difference is one of the most common ways an apples-to-apples comparison quietly becomes an unfair one.

Read the proposal line by line, not the total

Flush doors are made to order, so the specification text is where the real cost sits. Every serious proposal should state, for each opening: the clear opening size and the finished leaf size, the wall thickness the frame is built for, the swing or slide direction, the concealed hinge type and load rating, the lock or handleless arrangement, the surface system and its code, and whether the architrave-free junction to plasterboard, brick or timber cladding is included. If any of those are missing from one offer, send the same question back and put the answer in writing before comparing totals.

Then check what the price covers beyond the leaf. Concealed frames, ironmongery, floor guidance for sliding leaves, protective packing for site storage, spare finish material for touch-up work, and the packing list that lets your team match each crate to a door schedule all cost money somewhere. A lower headline number that excludes them is not cheaper; it simply moves the spend to a later variation.

Confirm made-to-measure details before production

Santerson's flush and concealed door pages describe project-specific sizing, material and finish selection, and a layout tailored to each space, with the standing instruction to confirm dimensions and selected specifications for every project. Treat that confirmation as a hard gate in your own programme: doors should be released to production only after floor levels, finished wall thicknesses and opening sizes have been surveyed on site, not taken off a design-stage drawing. Where a handleless detail is specified, Santerson Handleless Concealed Doors shows how the routing and reveal are meant to read, which is worth matching against your sample before sign-off.

Ask for one door to be released first on a multi-unit job. A single approved leaf sets the benchmark for colour, edge quality and reveal width, and gives your site team a reference to hold the remaining units to at handover.

Score both offers on the same sheet

Put every quotation into one table with fixed rows: dimensions confirmed by survey; frame and wall build-up detail stated; hardware brand, model and load rating named; finish code and sample reference recorded; edge treatment described; packing and labelling to the door schedule; spares and touch-up material included; installation support and after-sales scope defined. Fill each cell from documents, not from memory of a call.

Two offers that both score complete are worth having in front of you at the same time — which is where samples and proposals become useful beyond the spreadsheet. Santerson works as a single source for furniture and building materials on villa, hospitality and office projects, so door leaves can be specified together with the Flush Wall Aligned Doors in the same opening schedule, coordinated through one design, production and delivery workflow instead of chased across separate trades.

A short checklist before you sign

  • Sample in hand, checked under site lighting, with the finish code recorded against the proposal.
  • Every opening surveyed: clear size, finished leaf size, wall thickness, swing or slide direction.
  • Concealed hinge or sliding hardware named by brand, model and load rating.
  • Wall junction detail drawn, including the architrave-free reveal to each wall type.
  • Packing, labelling and door schedule agreed so units can be checked on arrival.
  • One approved first article before the balance is released to production.

Compare the evidence, not the font size of the price. When both suppliers have answered the same questions and shipped the same three items, the difference between them becomes visible in the places it matters: construction, hardware, tolerance and coordination.