Poolside furniture is where project budgets quietly leak. A lounger order looks simple until the deck layout changes, three frame versions appear in the specification, and the loungers have to match the daybeds, dining sets and pergolas that another supplier is delivering. This article walks through how procurement teams budget and scope the Aluminum Sling Sun Lounger Collection, with its multiple frame designs and adjustable backrest, inside a multi-product project rather than as an isolated line item.

Why the sling lounger family suits multi-product projects

The sling sun lounger range was developed for commercial poolside use, and that design logic is what makes it easy to budget. The seating surface is textilene mesh: an open weave that stays cooler under direct sun than a padded cushion and sheds splash water and rain instead of holding it. For a hotel deck or a resort beach club, that means fewer chairs out of service after a wet morning and no cushion rotation schedule in the operating plan.

The frame is aluminium, treated to resist chlorine and coastal salt air — the two environments that destroy untreated steel and rot timber fastest. Frame finish and sling colour can be customised to the project palette, so one lounger family can carry the design language across zones that look different on plan.

The part that changes the budget most is the frame options. The same collection is supplied as a static sled base, a wheeled movable version for decks that get reconfigured between events, and a folding version for venues that store their loungers off-season or need clear floor area on short notice. Instead of three separate product lines with three lead times and three freight schedules, you specify one family in three configurations.

Step 1: scope the deck by zone before you count units

Start from circulation, not from a unit count. On a pool deck there are usually four distinct zones, and each one takes a different frame version of the same lounger:

  • High-turnover sun deck. Fixed rows in a predictable pattern. The static sled base is the lowest-cost option here and the easiest to store and stack.
  • Lawn, terrace or flexible event area. Furniture moves. Specify the wheeled version so housekeeping and events staff can relocate rows without lifting frames.
  • Storage-constrained venues. Seasonal resorts, rooftop pools and water-park leisure zones often cannot leave furniture outdoors all year. The folding version reduces stacked volume and protects the finish.
  • Shaded or premium positions. Cabana-style seating sits next to the loungers and is priced very differently — budget it separately, not as an upgrade line on the lounger schedule.

Once zones are drawn, unit counts follow from clearances around each lounger rather than from a rounded number. Record which frame version serves which zone in the same table you send to the supplier; that single column prevents most of the substitutions that arrive on site.

Step 2: fix the backrest specification once, not per order

Every model in this collection offers stepless or multi-position back adjustment. Decide early which mechanism your project standardises on and write it into the schedule for all phases. Mixed mechanisms across phases look minor in a purchase order and become a maintenance problem later, when one spare part no longer fits both styles.

The practical question for the design team is what the backrest has to do in your setting. A hotel pool serving families needs a low, flat position for children and supervision sightlines. A spa or adults-only deck benefits from a more upright reading position. Both are covered by this range; the point is that the decision belongs to the design stage, not to the buyer placing a replenishment order.

Step 3: budget in product families, not single SKUs

A multi-product outdoor package fails at the seams — mismatched frame finishes, different powder-coat colours, slats that read as a different tone under the same sunlight. Group your budget lines so that everything sharing a sightline comes from one specification set.

Within SANTERSON's outdoor furniture range for villas and resorts, the sling loungers sit alongside pieces that share their aluminium construction logic. The Aluminum Cabana Daybed Collection covers the premium shaded positions, with a louver-roof version for sun and rain control or a soft fabric canopy with privacy curtains. Where the deck also needs eating space, an aluminium and teak-look slat dining set with a matching adjustable sun lounger brings dining and lounging into one finish, with teak-look slats that give the warm timber appearance without oiling. For villas combining a pool terrace with an outdoor table, the modern aluminium outdoor dining set and sun lounger collection is specified as one cohesive package.

Budgeting by family also simplifies the finish schedule. Frame colour, sling colour and slat tone are customised per project, so a single approved finish board covers every line in the group instead of three separate approvals.

Step 4: price what sits around the loungers

When teams scope multi-product projects, they compare unit prices and then discover that the lounger line grew. The usual causes are all predictable:

  • Frame-version mix. Wheeled and folding frames carry different hardware counts from sled-base frames. Quote each version separately in the schedule.
  • Finish and colour customisation. A bespoke frame finish or sling colour can apply across the whole family, so confirm whether the charge is per line or per project before you commit to a palette.
  • Spare parts and spares ratio. Mesh slings, adjustment hardware and castors are consumables on a commercial deck. Hold a spare allowance against high-use zones rather than ordering reactively.
  • Packaging and container loading. Mixed families need one loading plan, not three; how the loungers stack alongside dining sets and daybeds changes what fits in each container.
  • Delivery scope. Freight mode, customs paperwork and door-to-door delivery all sit outside the unit price. Confirm them for the destination country on the quotation itself.

Because SANTERSON works as a one-stop furniture and building materials supplier, the same purchase covers categories that would otherwise be separate contracts — ceramics, lighting, wall panels, flooring and ceiling systems for the interiors facing that pool deck. That is where a multi-product project actually saves money: one production schedule, one freight consolidation, one point of contact.

Step 5: use custom and OEM service to lock consistency across phases

Phased developments repeat the same mistake in reverse: phase one is furnished well, phase two buys whatever was available. The custom and OEM service covers bespoke finishes and textures, prototyping, flexible minimum order quantities and brand marking such as engraving or logos — the tools you need to reproduce phase one exactly in phase three. Keep the approved finish board, sling colour reference and frame-version table on file, and quote later phases against them.

If your team needs help before the schedule is written, interior design services cover space layout planning, furniture layouts and 3D renderings for indoor and outdoor furnishing schemes. A rendered deck plan settles the frame-version mix before it becomes a change order.

Step 6: plan logistics and installation as part of the budget

For Australian, Middle East and Southeast Asian projects, freight is usually arranged through logistics and door-to-door delivery, covering sea, air and rail forwarding, customs documentation, packaging and container loading, shipment tracking and delivery to site. Confirm Incoterms, insurance and the exact delivery point on the quotation for your destination; landed cost belongs in the lounger line, not in a contingency you hope never to touch.

On arrival, installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage, spare parts and ongoing maintenance. For a pool deck this is where the sling tension, backrest mechanisms and wheel assemblies get checked against the specification while everything is still under contract.

A practical scoping checklist

  • Draw the deck in zones; assign sled-base, wheeled or folding frames to each zone.
  • Standardise one backrest mechanism across all project phases.
  • Group loungers with daybeds, dining sets and pergolas under one finish board.
  • Quote frame versions separately, and confirm how customisation is charged.
  • Hold a spares allowance for sling mesh and adjustment hardware in high-use zones.
  • Confirm freight mode, Incoterms, insurance and delivery point before signing.
  • Record the approved specification so later phases reorder identically.

Scope it once, order it consistently

The Aluminum Sling Sun Lounger Collection is easy to budget because one family answers three operational situations — fixed rows, moving layouts and seasonal storage — with a shared frame finish and adjustment system. The savings come from scoping it as part of a family: matching daybeds, dining sets and pergolas under one specification, one production schedule and one delivery plan.

To price a poolside package for a hotel, resort or villa project, send your deck layout and target unit counts by zone to SANTERSON. We will quote the frame versions, finishes and matching outdoor pieces together, with consolidated freight to site. Enquiries through the contact page typically receive a response within 24 hours during business days.