A cabinet quotation can look complete on paper and still leave the build open to interpretation. Two projects can order "white matte, flat panel, handleless" and receive very different doors, because white has many shades, matte has several surface structures, and handleless has several hardware routes. A usable specification removes those variables one by one, so the drawing, the sample and the delivered cabinets describe the same product.
The White Matte Cabinets in our Matte Finish Kitchen Cabinets collection are made to measure, with material, finish and layout set per project. That flexibility is the reason a written specification matters: the item number fixes the look, and your document fixes everything else.
Start with the door, not the colour name
Colour words are shorthand, not a specification. Before anything else, record four separate attributes of the door front:
- Door style. Flat slab, shaker with a routed frame, or a profiled panel. The same finish on a slab and on a shaker reads differently in a finished kitchen.
- Finish family. Matte is a sheen range, not one material. Our matte catalogue covers lacquer, melamine, acrylic, PVC and wood veneer doors, each with its own feel, edge treatment and cost profile.
- Undertone. Warm white against grey or taupe, cool bright white against blue-grey. State which reference sample you are matching, by name or number.
- Edge and profile. Flat doors differ in edge radius; framed doors differ in rail and stile width. These details decide whether the run looks crisp or soft once installed.
Write all four into the specification line, then attach the approved sample reference. If a project later needs matching wardrobes or a vanity in the same tone, that line is what you hand over.
Fix the carcass and interior behind the front
Fronts are what people photograph; carcasses are what people use. Specify them separately, because a supplier quoting a cheaper carcass board or a thinner back panel has changed the product even though the doors match.
| Item to specify | What to write down |
| Carcass board and thickness | Board type, panel thickness, internal colour or finish, edge banding material and colour. |
| Back panel and fixing method | Panel thickness and whether it is grooved in or fixed, which affects box rigidity on long runs. |
| Drawers and runners | Drawer side style, runner brand and model as written on the quotation, soft close on or off, load rating where stated. |
| Hinges | Brand, series, opening angle and cup depth, plus the door thickness they are set for. |
| Interior fittings | Corner solutions, pull-out trays, pantry racking, appliance housings, bin compartments, each listed by cabinet position. |
| Integrated lighting | Where cabinet lighting is required, note the fitting location, switching and any transformer position. See Santerson Integrated Cabinet Lighting. |
Where the quotation lists hardware generically, ask for the brand and series to be written in. "Soft close drawer" is not a specification; a runner model number is.
State how the handleless look is achieved
Handleless fronts are a family of solutions, and they do not install the same way. Name the method in the specification so the doors, the cases and the worktop edge all agree:
- J-pull or routed groove at the top or side of the front, with the groove depth and radius stated.
- Recessed pull channel fixed to the case, which needs matching clearance at the worktop overhang.
- Surface-mounted profile handle, usually in a metal finish that should be listed with the tapware and appliance handles.
- Push-to-open hardware, which needs the door weight and panel thickness confirmed as compatible.
Also record the reveal between doors and drawers, and how the run resolves at return walls and tall units. Those dimensions come from the layout drawing, not the finish sample, and they are where a kitchen either looks built-in or looks assembled.
Tie the specification to the measured drawings
Made-to-measure cabinetry only works when the numbers on the drawing are the numbers used in production. Before the specification is signed off, confirm:
- Final room dimensions taken on site after flooring, plastering and tiling are complete, or clearly marked as pre-finish dimensions.
- Floor level and wall plumb allowances, so scribing and packing are shown rather than improvised on site.
- Appliance schedule with model numbers and cut-out sizes for built-in ovens, fridge, dishwasher and extraction.
- Services positions for sink, tapware, gas, water, waste and power outlets, drawn against the cabinet elevations.
- Worktop material and thickness, with the edge profile and the splashback or upstand detail.
- Clearance to doors, drawers and appliances in the open position, checked on the plan before approval.
Where a project also needs custom built-in kitchen cabinets carried through to bedrooms, laundries or living areas, use one drawing set and one finish schedule. Cabinet-to-cabinet tone matching fails when joinery is ordered in separate batches against separate notes.
Decide the scope of supply before requesting prices
A specification should say what you are buying as well as what you want made. State clearly whether the price covers cabinets only, or also worktops, sinks and taps, appliances, delivery to site, and installation. For projects that run cabinetry alongside flooring, wall panelling, doors and lighting, coordinating those items with one one-stop furniture and building materials supplier reduces the number of trades arguing over tolerances on site.
If you are supplying your own appliances or worktops, say so in writing and give the interface dimensions. A cabinet made for a worktop thickness that was never confirmed is one of the most common rework causes.
Sample approval: what to check and when
Ask for a door sample in the actual finish, not a printed swatch. Then evaluate it under conditions close to the finished room:
- Look at the sample in daylight and under the selected artificial lighting; matte surfaces shift noticeably between the two.
- Check the edge banding and any routed profile on the sample, since that is where a matte surface either holds its line or shows a seam.
- Compare the sample against your other fixed items — worktop, splashback, flooring and wall colour — before signing off.
- Keep the signed sample with the approved drawing set as the reference for production and for any later additional units.
Where a project needs bespoke finishes, textures or branding on the cabinetry, our Custom & OEM Service covers custom furniture design and prototyping alongside material and finish selection. Confirm the available options, minimum order quantities and production schedule for your specific project before the drawing is released.
Common gaps that turn into change orders
- "White" left undefined. No reference sample named, so the delivered tone is a surprise on site.
- Hardware quoted generically. Hinges and runners replaced with equivalents, changing feel and replacement supply.
- Carcass finish not stated. Interior colour differs between tall units and base units because nobody specified it.
- Appliance schedule missing. Cut-outs and ventilation confirmed after production has started.
- No installation scope. Nobody owns site preparation, scribing, or making good around the worktop.
- Additional units ordered later without the signed sample. A second batch of matte doors in a slightly different white is easy to produce and hard to fix.
- Door style, finish family, undertone and edge profile named, with the approved sample reference.
- Carcass board, thickness, internal finish, back panel and edge banding stated.
- Hinges and drawer runners listed by brand and series.
- Handleless method named, with door reveal dimensions.
- Interior fittings listed against each cabinet position.
- Appliance schedule with model numbers and cut-outs attached.
- Worktop material, thickness and edge profile confirmed.
- Scope of supply defined: what is included, excluded and installed.
If you want a second review of your cabinet specification or drawings, send them to our team with the room dimensions and the finish you are matching. We will confirm which White Matte Cabinets configuration fits the layout, and what needs to be fixed before production.