A glass walk-in wardrobe looks simple on a rendering and turns into a coordination problem on site. Panels have to arrive in the right sizes, the frames have to meet the flooring and ceiling at the right heights, and the internal fittings have to be fixed to carcasses that are already standing. Most rework on these projects comes from quantity and interface decisions made too late. This guide covers how to count quantities for a Glass Walk in Wardrobe project and how to coordinate the products that surround it, so the order you place is the order that installs cleanly.

Start With Room Types, Not A Unit Count

Walk-in wardrobes are not one product with one specification. In a villa or apartment project they appear in master bedrooms, second bedrooms, guest suites and sometimes a shared dressing room, and each of those rooms carries a different front treatment. The catalogue itself reflects this: Glass Walk in Wardrobes, Open Walk in Wardrobes, L Shaped Walk in Wardrobes and U Shaped Walk in Wardrobes are separate listings because the framing, the door hardware and the shelf spacing behave differently in each layout.

Write the room list first. For every wardrobe location record the plan dimensions of the room, which walls carry storage, the clear floor-to-ceiling height, and whether the front is glass, open or panelled. That single sheet becomes the base for quantities, and it prevents the common mistake of pricing a project as "N wardrobes" when in reality you have three glass-fronted dressing rooms, four open shelving runs and two corner units that need different hardware.

Count Quantities By Line Item, Not By Wardrobe

A walk-in wardrobe is a set of parts ordered against one room. Counting whole wardrobes hides the items that actually cause delays: glass panels, frames, doors and internal fittings each have their own lead time and their own tolerance on site.

Line itemHow to measure itWhat to record with the quantity
Carcasses / modulesRun length divided into module widths, plus end panels and any corner moduleModule width, depth, height, and which side is exposed
Glass fronts and panelsCount each leaf or panel individually; measure clear opening at head, middle and sillGlass type, tint or texture, frame colour, opening direction
Frames, tracks and hardwareTrack length in metres per run plus one hardware set per door leafTrack profile, wall or ceiling fixing condition, soft-close option
Internal fittingsRails, shelves, drawers and shoe racks counted per metre of runLoad expectation, drawer bank position, lighting feed points
Integrated itemsIsland units, vanity tables and display niches as separate line itemsWorktop material, appliance or basin interface, power and light positions

Where a room uses an island, treat it as its own item. An Island Walk in Wardrobe arrangement needs clear circulation on all sides, and its drawer stack has to be set out before the surrounding carcasses are fixed. If the island is priced as an accessory to a wall run, it usually arrives late or in a size that no longer fits the finished floor level.

Santerson walk-in wardrobe listings are made-to-measure: sizing, material, finish and layout are specified per project rather than chosen from fixed sizes. Quantities therefore come from your drawings and site measurements, and each dimension should be confirmed against the finished floor and ceiling levels before production starts.

Coordinate The Interfaces Before You Release The Order

Flooring And Skirting

Glass-fronted wardrobes read best when the floor runs through the opening and no skirting is cut around the carcass. Decide that early, because it changes both the panel height and the flooring order. Send the flooring quantity for wardrobe rooms as a separate line from the rest of the floor area: rooms where the floor continues under the storage need the extra material that would otherwise have been hidden by cabinets and skirting.

Lighting And Power

Integrated lighting inside a glass wardrobe is what makes the contents readable, but the cable routes have to be drawn before the carcasses go on site. Mark every light position, every sensor and every power point on the same drawing that shows the shelf layout, then confirm which items are supplied with the joinery and which come from the electrical package. Integrated Cabinet Lighting sits in the same fit-out family as the cabinetry, so specifying it with the wardrobe instead of after it avoids a second visit to open the panels.

Adjacent Built-In Elements

In most bedroom wings the wardrobe wall is shared with other built-ins. A dressing area often continues into a vanity, and the same wall may carry a full-height storage run or sliding panels that close off the space. Coordinating those elements in one order keeps the panel colours, edge profiles and handle details identical: Closet Sliding Panels for the opening, Full Height Storage Walls where a closed run is wanted, and a Custom Minimalist Bedroom Wardrobe for bedrooms that need flat-panel fronts instead of glass. A whole-house project such as the arched niche and full-house wall cabinet work on our site shows what one package delivers: display niches with lighting, a full-height concealed wardrobe, an integrated vanity and the bathroom countertop all drawn to the same detail.

Glass Type And Privacy

The glass you specify decides how much of the interior is on show. Clear fronts turn stored clothes into part of the room decoration and only work if the internal layout is disciplined. Frosted, ribbed, bronze and smoked options soften the reflection and hide contents while keeping light in the room. These are catalogued as separate finishes — Frosted Glass Wardrobes, Smoked Glass Wardrobes and Ribbed Glass Wardrobes — so specify the finish per room on the same schedule that carries the quantities. Where a bedroom mixes materials, a Glass & Lacquer Combination Wardrobe keeps glass on the display bays and solid panels on the storage that does not need to be seen.

Order The Package Once, From One Supplier

Splitting joinery, glass, lighting and stone across several suppliers is where quantity errors multiply: each package measures the space separately, and small differences in what "finished floor level" means become visible on site. As a one-stop furniture and building materials supplier, we produce wardrobes together with the flooring, wall panelling, vanities, lighting accessories and other fit-out items they touch, which keeps one set of dimensions in play from design through installation. Our cooperation follows three steps — project brief and design proposal, quotation with detail confirmation, then production, shipment and follow-up — so the schedule you sign off is the schedule that ships.

For projects outside China we handle freight arrangements and door-to-door delivery, and site installation support is available where required. Confirm the scope, terms and any local requirements for your specific project during the quotation stage rather than assuming them.

A Pre-Production Checklist

  • Every wardrobe room listed with plan dimensions, clear height and front type (glass, open or panelled).
  • Carcasses, glass panels, tracks, hardware sets and internal fittings counted as separate line items.
  • Dimensions taken against finished floor and ceiling levels, not structural slabs.
  • Glass finish specified per room, with a written sample reference.
  • Lighting, sensors and power points marked on the joinery drawing before release.
  • Flooring quantities split between wardrobe rooms and the rest of the floor area.
  • Adjacent built-ins — sliding panels, storage walls, vanities, worktops — ordered against the same drawing set.
  • Delivery sequence agreed so carcasses, glass and internal fittings arrive in install order.

If you are pricing a villa, apartment or hotel project and need quantities checked against your drawings, send us the room schedule and we will return a made-to-measure proposal for the wardrobe package and the fit-out items around it. Enquiries go through our contact page.