A poolside dining set and a matching adjustable sun lounger rarely cause trouble on the drawing board. They cause trouble in the last eight weeks of a project, when the deck finish has been laid, the crane window has closed and nobody has confirmed who carries the boxes from the truck to the terrace. If you are specifying an aluminum & teak-look slat outdoor dining set and adjustable sun lounger for a resort pool deck, a villa terrace or a café patio, the coordination work is worth doing before the purchase order, not after it.
This guide walks through the sequence we follow on outdoor furniture packages: fixing the configuration, matching the delivery window to site conditions, planning the installation and handover, and setting up the after-sales step. It is written for procurement managers, contractors and owners' representatives who have to make three or four trades agree on the same calendar.
Why this particular set needs a delivery plan of its own
The collection is all-aluminium: a rectangular slat-top dining set with sled-style chairs and a matching lounger that supports several recline angles. The slats carry a teak-look texture, so the surface reads as timber without the cracking, fading and oiling cycle that real wood brings to a poolside. Slatted surfaces let rainwater drain through rather than pond on the top, which is the main reason these sets survive high-traffic resort use with very little routine care.
Those same attributes shape the logistics. Aluminium frames are light enough to be carried by hand, but table tops and lounger chassis ship as separate, awkwardly shaped units that scratch if they slide against each other in a container. Frame colours and table dimensions can be customised for hospitality projects, which means the specification is not finished until the finish sample and the dimension sheet have been signed off — and anything customised cannot be swapped at the last minute from local stock.
Plan around three facts: customised items have a production lead time that starts when the drawings are approved, not when the order is placed; outdoor goods still need protected storage until the day they are placed outside; and the chairs, tables and loungers in one collection may arrive on different pallets.
Step 1 — Lock the configuration before you lock the delivery date
Delivery dates slip most often because the specification was still moving when production should have started. Work through these items in one review, with the site drawings open beside you:
- Count the settings against real circulation widths, not the rendered plan. Sled-style dining chairs need clear pull-back space behind them, and a lounger needs room to recline fully without touching the balustrade or a planter.
- Confirm table dimensions and frame colour in writing, with the same reference used on the purchase order.
- Decide whether the lounger quantity matches the dining quantity deliberately. Pool decks usually need more loungers than dining seats, and ordering them in one package saves a second freight leg.
- Note the substrate under each setting — tiled deck, timber deck, pavers or compacted gravel — because it determines whether levelling feet or packing pieces are required at installation.
If the project also needs a shaded dining area, that decision belongs here too. A motorised louvered aluminium pergola has its own anchoring and electrical requirements, so it should be ordered on the same programme rather than bolted on after the furniture is already in place.
Step 2 — Match the delivery window to site conditions
Outdoor furniture should arrive after the wet trades, hard landscaping and overhead works are finished, but before soft opening or handover. Arriving earlier means weeks of covered storage and avoidable damage; arriving later means the terrace photographs badly for the client.
- Fix a delivery range, not a single day, and confirm the access route for the vehicle — gate widths, turning areas, and whether the terrace is reachable by forklift or only by hand.
- Name a dry, lockable holding area with floor protection. Pallets of slatted tops should stay flat and shrink-wrapped until the day they are placed.
- Agree the receiving contact and their phone number on the shipping documents, so the consignment is not released to a site that cannot accept it.
- Inspect against the packing list on the day of arrival while the packaging is still intact, and photograph any transit damage immediately.
SANTERSON handles logistics and door-to-door delivery as part of the package, covering freight arrangements, export paperwork and container loading planning. The practical point for your programme is that one supplier holding the freight chain gives you a single tracking reference and one party to chase when the site date moves — rather than three.
Step 3 — Plan installation as a short, supervised sequence
Assembly on these sets is light work, but it should still be scheduled and witnessed, because the checks that follow are what protect the handover.
- Lay out each setting on site to the plan, then walk the circulation with the client or operator before anything is fixed in position.
- Fit frames and tops, check every fixing, and level each unit on the finished substrate so tables do not rock on a tiled deck.
- Cycle each lounger through its full range of recline angles and confirm the mechanism moves freely with no interference from the deck edge or adjacent furniture.
- Wipe down the slats, remove packaging and protective film, and record serial or item references against the room or zone schedule.
- Walk the snag list with the operator, then photograph the completed terrace for the handover pack.
Our installation and after-sales support service covers on-site installation, inspection and snagging, plus spare parts and replacement for components that wear in service. For a multi-property operator, keep the original specification sheet with the handover documents: when a lounger mechanism or a slat panel is needed two years later, matching the recorded finish and dimension is what avoids a visibly mismatched replacement.
Step 4 — Build one schedule that covers the whole outdoor package
A dining set and loungers are rarely the only outdoor items on a villa or resort scope. Grouping related products into one procurement schedule reduces the number of freight legs, keeps finishes consistent across zones, and lets you place everything behind one delivery window.
In practice this means the dining and lounger set, the lounge seating, any gazebo or pergola structure, and complementary pieces such as a polycarbonate hardtop outdoor swing bench for the garden are specified together, produced in one batch where possible, and released to site on the same programme. Where a project needs bespoke sizes, finishes or branding, that work sits under our custom and OEM service, which covers furniture design and prototyping alongside material and finish selection.
As a one-stop furniture and building materials supplier, SANTERSON supplies outdoor collections together with the interior fixtures, flooring, wall finishes and lighting that the same project needs, so the exterior and interior scopes can be coordinated by one team instead of reconciled between several vendors.
Common coordination failures — and what prevents them
- Custom colours approved too late. Production cannot start until the finish reference is signed. Approve it with a physical sample, not a screen render.
- Delivery released to a site with no storage. Confirm the holding area and receiving contact before dispatch, not on the delivery note.
- Loungers ordered to dining counts. Set the ratio from expected occupancy and sun exposure, then order both in one batch.
- No snag walk before handover. Level and recline checks take twenty minutes and are far cheaper before the client signs than after.
A short checklist for your next outdoor package
- Configuration signed off: quantities, table dimensions, frame colour, lounger recline range.
- Delivery range agreed against the site programme, with access route and storage confirmed.
- Receiving contact named on the documents; inspection against packing list on arrival day.
- Installation window scheduled with a supervised snag walk and photographic record.
- Specification sheet and item references filed with the handover pack for future spare parts.
Send us the drawings, the outdoor quantities and your target site date, and we will map the production and delivery sequence around them — including customised dimensions and finishes where the terrace layout demands them. Talk to us through the contact page to start that coordination conversation.