A two tone lacquer wardrobe looks simple on a rendering and complicated on site. The gloss or matte sheen has to match across a run of doors, the split between the two colours has to line up with the room, and the carcass has to be built to the actual wall dimensions rather than a catalogue size. That is why sourcing them from an overseas manufacturer works well when the specification is written properly, and goes wrong when it is left to the factory's discretion.
This guide walks through how buyers, builders and project designers in Australia and elsewhere specify two tone lacquer wardrobes direct from a China-based manufacturer — what to define before you request a quotation, which questions decide whether the finished joinery matches the design intent, and how production, freight and installation are coordinated so the wardrobe arrives ready to fit.
What "two tone lacquer" actually specifies
Two things are being specified in that phrase, and it is worth separating them before you talk to a factory.
Lacquer refers to the sprayed finish on the door face. On our site the Lacquer Wardrobes collection (product code series H1HKH) covers high gloss, matte, neutral tone and two tone variants, so the same door construction is offered in different sheen levels. A high gloss lacquer door reflects the room and reads as a feature surface; a matte lacquer door hides fingerprints and reads quieter under bedside and downlight.
Two tone refers to how many colours appear across the elevation — typically one colour on the field panels and a contrasting colour on frames, drawer fronts or an open niche. It is a design decision first and a manufacturing decision second, because the boundary between the two colours has to be defined in a drawing before the doors are cut.
Our Two Tone Lacquer Wardrobes page states the configuration plainly: made-to-measure sizing, material and finish options, and a layout tailored to the project. Nothing about that product is stocked in fixed widths. If a supplier offers you a "standard" two tone lacquer wardrobe for a project fit-out, ask what standard means and what has been left out.
Before you request a quotation: six things to fix in writing
Overseas sourcing is not difficult; it is unforgiving of gaps. Fix these before the price is quoted, because each gap becomes a change order after production starts.
- Room dimensions taken on site, not from plans. Floors and ceilings in renovated villas are rarely square. Give finished floor levels, wall-to-wall distances at top and bottom of the run, and note skirting, cornices, power points, downlights and any bulkhead that the carcass has to clear.
- The elevation itself. Where the second colour starts and stops on each door, whether the split is horizontal or vertical, and whether the two tones continue onto the end returns or stop at the frame edge.
- Sheen level for each colour. "Gloss" from one factory is not the same film build as another. State high gloss or matte per colour, and ask how many lacquer coats and what curing process are used.
- Interior layout. Hanging heights, drawer bank positions, shelving spans, lighting in open niches. If you have not decided, say so and get the layout proposed back to you before sign-off.
- Door operation. Hinged, sliding or open. This changes the carcass depth, the track and hardware specification, and how much clearance the doors need from curtains, bedheads and adjacent walls.
- Who measures and who installs. If your trades fit the joinery, say so at quotation stage; if you want on-site installation support, that has to be in scope from the start.
Questions worth asking an overseas wardrobe manufacturer
| Ask | Why it matters |
|---|---|
| Is the wardrobe made to my dimensions, or adjusted to a module? | Made-to-measure means the carcass is cut to your wall. A modular fit leaves scribes and filler panels that show up as visible gaps under raking light. |
| How are the two colours separated on the door — different panels, or masking on one panel? | Different materials or bonded profiles give a crisp, repeatable line. Masking on a single panel is more variable across a long run. |
| What substrate sits under the lacquer, and what is the edge treatment? | Edge banding and lacquer wrap determine whether edges yellow, chip or show a seam after a year of use. |
| Can you supply a sample door or finish board before full production? | A physical sample in the actual room light settles sheen and colour arguments far earlier than a digital render. |
| What hardware brand and model, and is soft close included? | Hinges and slides are the parts that get replaced. Naming them in the order protects you on future spares. |
| How is the joinery packed and blocked in the container? | Lacquer surfaces mark if panels travel face to face without protection. Packing method belongs in the order, not in a claim afterwards. |
| What drawings are issued for my approval before production? | Approved shop drawings are your only contractual reference for layout and colour placement. |
How the order actually moves: design, production, delivery, fitting
SANTERSON has been manufacturing furniture and building materials in China since 2008, and custom/OEM work is part of the standing service range rather than a special request. For a wardrobe package that usually runs through custom and OEM service, with design coordination and space planning handled under our interior design services.
1. Brief and layout
Your dimensions, elevation intent and interior layout go in; proposed layouts and material options come back out. This is where a two tone scheme gets resolved into a buildable drawing.
2. Quotation and detail confirmation
The quotation should itemise carcass, doors, hardware, finishes and packing. Vague line items are where cost surprises appear later, so ask for the breakdown rather than a single package price.
3. Production and quality control
Once shop drawings are approved, panels are cut, edged, sprayed and cured. Colour and sheen checks across a batch matter more here than on any other wardrobe finish, because lacquer shows variation between batches under the same light.
4. Freight to site
Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, along with the paperwork side — commercial invoices, packing lists and certificates of origin. Import terms, duties and transit time are confirmed per project rather than assumed, so get them stated in your landed-cost figure before you commit.
5. Installation and after-sales
On-site installation with inspection and snagging is available, along with spare parts support afterwards. For a two tone run, the snag list should specifically check that the colour break lines up across adjacent doors and that door gaps are consistent — both are fixing issues, not manufacturing issues, and are cheap to correct when caught at handover.
Where two tone lacquer wardrobes fit best
- Villa bedrooms and dressing rooms. A darker tone on the field with a lighter frame keeps a full-height run from reading as one heavy block, which is the usual problem in rooms with high ceilings.
- Boutique-style walk-in layouts. Where open niches sit between closed doors, the second colour marks the transition and makes the storage read as designed rather than filled in. Our boutique style walk in wardrobes work on that same principle.
- Apartment and unit developments. Repeating one two tone scheme across multiple bedroom types is easier to control when the joinery comes from a single factory with one approved colour standard.
- Renovations where the wardrobe has to disappear. Matching one of the two tones to the wall paneling lets the run sit flush with the room. That usually needs the joinery and the wall panel systems specified together, from the same supplier, so the finishes actually match.
A practical note on risk. Almost every failed two tone wardrobe job traces back to one of three things: dimensions taken from drawings instead of the site, a colour boundary that was never drawn, or sheen described in words rather than approved on a sample. All three are free to fix at the specification stage and expensive after the container has sailed.
Questions buyers ask us
Can I order one wardrobe, or is there a large minimum?
Custom and OEM work is handled with flexible minimum order quantities. A single villa bedroom run and a multi-unit apartment package are both normal enquiries; what changes between them is how the layout approval and packing are arranged.
Do you supply other wardrobe finishes in the same construction?
Yes. Alongside two tone lacquer, the Lacquer Wardrobes collection includes high gloss, matte and neutral tone options, and we also produce acrylic, melamine, veneer, solid wood, glass-front and aluminium-frame wardrobes. If a project mixes finishes across room types, specifying them together keeps hardware, tolerances and edge details consistent.
What do you need from me to get a real price?
Site dimensions, an elevation or at least a sketch showing where each colour sits, the interior layout you want, and your preferred door operation. With those four items we can quote properly instead of giving you a figure that moves.
SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials serving villa, hospitality and office projects worldwide, with custom/OEM production, door-to-door logistics and installation support. Send us your room dimensions and elevation intent and we will come back with layouts, finish options and an itemised quotation for your two tone lacquer wardrobe package.