A swim spa is one of the few outdoor purchases where the finished unit you receive is only as good as the specification agreed months earlier. The Outdoor Swim Spa WS-115Fⅳ sits in that category: a compact plunge-and-swim cabinet with an integrated swim training system, water jets, ozone sanitation and LED lighting. Buying it direct from a China-based maker cuts out the local reseller margin, but it also moves specification, freight and commissioning onto your side of the deal. The sequence below is how we handle that work on villa, resort and private-residence projects.
Read the catalogue sheet as a starting point, not an order
The published record for WS-115Fⅳ lists catalog dimensions of 5000 × 2200 × 1250 mm, one control system, one swim training system, one water pump, one filter pump, a jet total of 24 pieces, four LED lights and a total power figure of 8.05 kW. Those numbers describe the configuration shown on the product page. They are not a promise about the unit that leaves the factory, because options such as heat pumps, UV sterilisation, sand filtration, extra insulation, steps and alternative control systems change both the equipment list and the electrical load.
Treat the sheet as a checklist of what still needs confirming. Before any price is meaningful, ask the factory to restate your chosen configuration line by line: which pumps are fitted, how many jets in the seating zone versus the swim zone, whether ozone is the only sanitation method or UV is added, and what total connected load that build actually draws.
Match the shell footprint to the site before you fall in love with the model
A 5000 mm cabinet with a 1250 mm water depth fits a narrow terrace, a side yard or a pool deck where a full-length pool would swallow the whole outdoor area. The same shell will not fit a set-back with a service corridor behind it, so send the factory your site plan with access routes, slab levels and the position of the nearest power entry marked. Where the standard footprint does not work, the range also covers other configurations in the 115 family — for example WS-115Aⅳ at 3880 × 2200 × 1250 mm with the same jet and pump layout — and shaped units such as the Customizable Shape Outdoor Spa, built in square, round, oval or curved acrylic shells for gardens and terraces with awkward geometry.
Confirm three site items in writing: the load-bearing capacity of the slab or deck under a full cabinet, the drainage route for backwash and overflow, and the clearance needed to lift the assembled shell into position or to assemble it on site. Those three decide whether a delivered unit can actually be installed.
Fix the electrical and sanitation scope early
Electrical is where imported swim spas most often stall. The 8.05 kW figure in the catalogue refers to the displayed configuration; adding a heat pump changes it, and the supply your electrician prepares has to match the final build, including circuit protection, earthing and bonding to local requirements. Ask the manufacturer for the wiring diagram, motor nameplate data and the recommended supply specification for your selected equipment list, then have a local electrician sign off before the unit ships.
Sanitation is the second decision. Ozone is listed as a fitted feature on this model; UV sterilisation appears in the optional-accessories list. Which one you choose changes routine maintenance, spare parts and how often the filter pump runs. Decide it at quotation stage rather than after delivery.
Put the whole scope with one supplier when the project has more than a spa
Splitting a swim spa, the surrounding paving, the pergola over it and the poolside loungers across four vendors multiplies your coordination work. As a one-stop furniture and building materials supplier, SANTERSON manufactures outdoor furniture, interior fixtures and building finishes alongside the swim and hydrotherapy range, so the shell, the cabinet surround, the shade structure and the poolside seating can be specified against one drawing set and shipped on one schedule. The company has operated since 2008 as a China-based manufacturer for hospitality, villa and office projects, with turnkey solutions covering design consultation, material selection, production and site coordination.
That single point of contact matters most when something has to change. A dimension revised after the spa shell is moulded affects the deck, not just the unit.
Ask for configuration drawings before production starts
The custom & OEM service covers bespoke finishes, materials and dimensions, supported by 3D modelling and prototyping. For a swim spa the useful deliverables at this stage are a dimensioned shell drawing showing jet positions, seating depth, steps and equipment access panels, plus a written equipment schedule naming each pump, jet bank, light and control unit. Sign those documents, not marketing photographs. Production against an unsigned specification is how buyers end up with jets aimed at the wrong wall.
Agree freight terms, then agree who unpacks and commissions
A swim spa arrives as bulky, high-value cargo, so the delivery terms you accept decide how much of that risk you carry. The logistics and door-to-door delivery service covers sea, air and rail freight forwarding, packaging and container loading plans, commercial invoices, packing lists, certificates of origin and shipment tracking through to the delivery address. Confirm for your specific order which leg ends at the port and which continues to site, whether cargo insurance is included or added, and how the cabinet is crated and blocked for inspection on arrival.
Then settle commissioning. The installation and after-sales support service covers on-site installation, inspection with a snag list, warranty coverage, spare parts and ongoing maintenance. Before shipping, ask which items are covered by the warranty, whether a technician attends for first fill and start-up, and how quickly replacement jets, pump seals or control boards can reach you. Get those answers in writing as part of the purchase order.
A practical pre-order checklist
- Configuration schedule signed by both parties: pumps, jet count and placement, swim training system, lighting, ozone or UV, heat pump, insulation, steps.
- Dimensioned drawings with site levels, access route and lifting plan attached.
- Supply specification and wiring diagram approved by your local electrician.
- Incoterms, insured value, crate specification and container-loading photographs agreed before the order is placed.
- Warranty scope, spare-parts list and commissioning arrangement stated on the purchase order.
Start with the configuration, not the price
Sourcing an outdoor swim spa from overseas rewards buyers who specify first and negotiate second. Send the factory your site plan, your required equipment list and your supply constraints, then compare quotations that describe exactly the same build. If you want a configuration reviewed against your site, send the drawings and dimensions to the SANTERSON project team and we will confirm what can be produced, shipped and commissioned.