A media wall that mixes open shelving with closed cabinets looks simple on a rendering. It is one of the hardest items to buy well, because it has to satisfy three different jobs at once: hide clutter, display objects, and carry televisions, players and cabling without the whole wall looking like a service panel. If you are sourcing these units for apartments, villas or hospitality rooms, the supplier conversation matters more than the catalogue picture. Here is what a project buyer should actually check before confirming an order of Santerson Open & Closed Combo Units.
1. Confirm the unit is genuinely made-to-measure, not a fixed size with options
The first question to ask is whether the supplier will build to your wall or expect your wall to fit their unit. The Open & Closed Combo Units listing in the TV Cabinets / Media Units collection is described as configurable, with finish, layout and dimensions specified to suit each space. That is the right starting point for project work, but a buyer should push past the wording.
Ask for the shop drawing before production: elevation showing every open bay and closed bay with clear openings, not just overall height and width. Overall dimensions tell you the unit fits the wall; clear internal dimensions tell you whether it holds your equipment. A receiver, a games console and a set-top box each need shelf depth and a ventilation gap, and an open bay that is 40 mm too shallow turns a design feature into a return claim.
2. Agree the open-to-closed ratio room by room, not for the whole project
Buyers often lock one layout across every unit type in a development to keep costs tidy. That is usually where these units fail in use. A guest room needs fewer open bays and more closed storage, because housekeeping stores linens and consumables behind doors. A show villa or sales office benefits from open display niches, because the styling team needs surfaces to work with.
If one layout cannot cover both uses, ask whether the same family of components can be reconfigured rather than redesigned. The wider range includes Santerson Mixed Open & Closed Storage for full-height integrated wall systems and Santerson Mixed Open & Closed Systems in modular living configurations. Keeping the component language consistent across those three collections is what lets you vary the ratio without changing the joinery detail, and it keeps the finish and edge treatment matching from the lobby to the guest room.
3. Specify the closed side properly: doors, hinges and access
Closed compartments are where cost savings quietly damage a project. For each door, confirm the opening direction against the traffic line in the room, the hinge type and whether soft closing is included as standard or quoted as an option. Then check what sits behind the door: fixed shelves cut off tall items, adjustable pins give flexibility but need a pitch that matches your storage items.
Where a project needs concealed services or a cleaner front, ask about Santerson Sliding Storage Panels, which let an open display bay be closed off when it is not in use. That is a practical answer for rooms where the same wall has to look styled for viewings and functional for daily living.
4. Settle the television, cable and power interface before production
This is the most common source of rework on site, and it is a coordination problem rather than a furniture problem. Before the units go into production, confirm:
- the exact screen size and mounting type, so the recess and backing reinforcement are built for that load;
- where power, data and aerial points land relative to the open bay, and whether cable cut-outs are requested or left to the installer;
- whether remote-control line of sight requires an open bay rather than a glass front;
- if lighting is part of the design, how drivers are accessed for maintenance — see Santerson Integrated LED Media Units for configurations that carry integrated lighting.
Because configurable listings carry limited technical detail on the product page, dimensions, materials, hardware and lighting specification should be confirmed in writing for the configuration you are actually buying. A supplier who sends a specification sheet without being chased is telling you something about how the rest of the order will run.
5. Check finish and substrate consistency across the whole order
Open bays show the interior substrate, not just the door face. That means a veneer, laminate or lacquer specification has to be consistent on visible internal surfaces, edges and any adjoining wall panelling in the same room. Ask which materials are available for your finish — wood, metals, engineered stone and laminates are all listed under SANTERSON's Custom & OEM Service — and ask for a physical sample board rather than a digital render, since sheen level and grain direction read very differently in person.
If your project also includes wardrobes, kitchen cabinetry or wall panelling from the same supplier, request that all joinery is produced under one finish batch. Colour drift between two production runs on the same project is one of the few defects that cannot be fixed on site.
6. Judge the supplier by their coordination workflow, not their brochure
For a buyer managing fit-out across several rooms or several buildings, the useful question is whether one supplier can carry the whole joinery package. SANTERSON describes a six-stage project workflow — consultation, design and planning, production, logistics, installation and after-sales — under Turnkey Interior Project Solutions, with drawing and production coordination plus on-site guidance handled by the same team. That matters here because a combo unit sits against a finished wall and shares services with it; whoever builds the unit needs to have seen the wall detail.
Practical checks on that workflow: who signs off the shop drawing, what happens if site dimensions differ from the drawing, whether packaging and container loading protect panel edges on a long sea leg, and how spare parts and replacement panels are ordered later. Import terms, duties and delivery scope should be agreed case by case for your destination rather than assumed from marketing copy.
A short pre-order checklist
- Shop drawing with clear internal dimensions for every open bay and closed compartment.
- Confirmed screen size, mounting method and backing reinforcement.
- Power, data and cable positions marked on the drawing, with driver access agreed.
- Door type, opening direction, hinge specification and shelf adjustability listed per unit.
- Physical finish sample board approved, including internal surfaces and edges.
- Written specification for materials, hardware and any integrated lighting.
- Named contact for drawing sign-off, site-measurement discrepancies and after-sales spares.
A media unit that balances open display with closed storage is worth specifying carefully, because it is one of the most visible pieces in a living space and one of the most scrutinised by buyers and end users. Send your room dimensions, equipment list and finish preference to SANTERSON and ask for a configuration drawing with a specification sheet — that single document will tell you more about the supplier than any catalogue page.