A quotation for bronze glass aluminum frame wardrobes can look complete on the first read: a product name, a unit rate, a set of dimensions. It still may not be comparable with the quotation from the workshop down the road. Before you sign anything, work through the checks below, because wardrobe joinery is bought as an assembly of decisions, and every decision left out of the paperwork becomes a variation order later.

Start with the scope line, not the price line

Most disputes in made-to-measure joinery begin with a difference in scope rather than a difference in workmanship. A low rate usually means fewer inclusions. Read the scope statement first and confirm what sits inside the quoted number: carcass only, or carcass plus doors; doors plus hardware; internal fittings; plinths, scribes and infill panels where walls are out of square; lighting provisions; packing for export; installation labour on site.

Write the exclusions down as well. A supplier that lists what it does not supply is easier to compare than one that stays silent, because silence gets filled in by whoever is quoting next.

Ask for a specification sheet you can hold someone to

For this product family the useful specification sheet states, item by item:

  • Glass — tint (bronze, in this case), thickness, whether the pane is tempered, and how it is fitted: rebated, beaded or set in a gasket.
  • Frame — aluminium profile series, wall thickness of the extrusion, surface treatment (anodised or powder coated) and the colour or sheen reference actually being produced.
  • Carcass — board type, board thickness, edge banding material on all four edges, and the finish of the interior surfaces, not just the visible ones.
  • Hardware — hinge and slide brand or model, closing action, load rating for drawers, and whether handles are integrated into the profile or added separately.
  • Internal layout — hanging rails, shelf spans and thickness, drawer bank positions, and any provisions for mirrors, ironing boards or lighting.

If the manufacturer cannot produce this level of detail in writing, they are not quoting a defined product. They are quoting an intention, and intentions are renegotiated on site.

Compare like with like across the collection

Bronze glass is one tint in a wider set of glazed options. When you benchmark, put the alternatives side by side on the same specification so that the difference you are pricing is the tint and finish, not the whole assembly.

OptionWhat changes in the proposal
Bronze glass aluminum frame wardrobesWarm tinted pane; the frame colour and the room palette need to be confirmed together, since bronze glass reads differently under warm and cool lighting.
Smoked glass aluminum frame wardrobesDarker pane; contents are more obscured, so internal lighting becomes a bigger part of the value.
Frosted glass aluminum frame wardrobesMatte surface; privacy is higher, and fingerprints and edge handling matter more in the finish spec.
Clear glass aluminum frame wardrobesFully transparent; the internal layout is on display, so shelf and drawer detailing has to be finished to a visible standard.

Ask each supplier to price the same elevation in two or three of these options. The spread between them tells you whether a quote is cheap because the workshop buys glass well, or cheap because something else was dropped.

Check how made-to-measure the offer really is

A lot of proposals say "custom" and then sell from a fixed grid of widths and heights. The question to put in writing is simple: which dimensions can actually be changed without moving you into a different price band? For our built-in furniture range, sizing, layout and finish are specified per project rather than chosen from a fixed module list, and the drawing set is confirmed before production starts. That is the arrangement worth insisting on with any manufacturer you evaluate.

Then check how the proposal handles the awkward parts of a real room: ceiling heights that vary along a wall, skirting that has to be scribed around, a corner return, or a run that stops short of a doorway. A serious proposal shows these conditions on the drawing and prices them.

Test the maker's design and production coordination

Ask to see the sequence: measured survey or dimension sheet, layout proposal, elevation drawings with materials called out, then a signed approval before cutting. Our interior design services follow that order — space planning and concept work first, drawings and production coordination after, with on-site guidance at the end. A manufacturer who can show you the same chain is a manufacturer whose quotation you can rely on, because the price was set against a drawing rather than against a photograph.

Also ask what happens when your architect's detail conflicts with the workshop's standard build. The answer reveals whether they will absorb the coordination quietly or invoice it later.

Price the whole delivery, not just the unit rate

For an overseas order the unit rate is only part of the cost. Ask for packing method and pallet or crate specification, the container loading plan, who prepares commercial invoices, packing lists and certificates of origin, and where risk transfers from seller to buyer. Then confirm what arrives on site: fully assembled units, flat packs with a fixing schedule, or a mix, and who assembles and fixes them.

A useful line to include in your request for quotation: "Please price the same elevation three ways — supply only, supply with packing for export, and delivered and installed at site."

Three numbers on one page make weak assumptions visible immediately.

Look at the sample before you look at the discount

Request a sample of the actual build: a door corner showing the profile joint, the bronze pane set into it, and the edge banding on a cut board. Handle it. Check the joint line, the coating continuity at the edges, and how the glass sits in the frame. A sample you can hold settles arguments that photographs never resolve.

Then check after-sales terms in the same document: what is covered, how replacement panels or hardware are supplied, and who supports a fix on site. Terms written before the order are worth far more than assurances given after it.

A short pre-award list

  • Scope and exclusions stated in writing, item by item.
  • Glass, frame, carcass, hardware and internal layout specified by model or standard, not by adjective.
  • Two or three glazed options priced on the same elevation for comparison.
  • Drawings signed off before production, with out-of-square and corner conditions shown.
  • Packing, freight documentation, delivery terms and installation split into separate prices.
  • Physical sample inspected and approved.

Six lines, all answered in writing, and the proposal in front of you stops being a price and becomes a contract you can actually manage.

SANTERSON supplies made-to-measure wardrobes, cabinetry and building materials for villa, hotel and office projects. Send us your elevation drawings and room dimensions and we will return a specification-based proposal you can compare line by line.