A wardrobe drawing that shows only an elevation and the words "rustic oak" will come back as something else entirely. Rustic is not one look — it is a family of grain, distressing, finish and hardware choices, and two factories reading the same sentence will build two different wardrobes. The brief below is the list of decisions we ask our project clients to settle before a rustic solid wood wardrobe quotation is requested, so that the price you approve and the unit that arrives at site are the same piece of furniture.

1. Fix the species before you fix the colour

"Solid wood" describes construction, not appearance. Within our Solid Wood Wardrobes range the same door profile reads very differently in oak, walnut, cherry and mahogany: open grain takes stain deeply and shows every saw mark, while a tighter grain stays smoother and holds a more even colour. State the species you want, then state whether the wood may be substituted if that species is unavailable at the time of production. A substitution clause agreed in writing at quotation stage prevents a mid-production argument; discovering it on the delivery note is too late.

If your design intent is the look rather than the timber itself, say so plainly and ask for a veneered alternative instead. We produce both, and an honest brief about budget versus appearance saves everyone a sample round.

2. Describe "rustic" in measurable terms

Rustic covers a wide range, and the differences are visible on the finished door. Specify each of these separately:

  • Surface texture — hand-scraped, wire-brushed, saw-marked, or flat-sanded. Wire brushing pulls out the soft grain and leaves a tactile ridged surface; scraping leaves shallow irregular depressions that catch light.
  • Distressing level — none, light edge wear, deliberate knots and worm-holes, or heavy reclaimed character. Ask for a numbered scale on the sample so "medium" has a physical reference.
  • Knot and sapwood policy — how many sound knots per square metre are acceptable, and whether sapwood and colour variation are welcome or must be sorted out.
  • Board width and construction — narrow boards with visible joints, wide boards, or a panel-and-frame door. Rustic interiors often use wider boards; frame-and-panel doors move with humidity and need that movement designed in.
  • Finish sheen and product — matte hard-wax oil, satin lacquer, or a washed/limed treatment. Name the sheen band you expect and whether the finish is applied in the factory or on site.

One line does most of this work for us: "match the attached reference photograph, with distressing no lighter than sample A and no heavier than sample B". Where a project has no reference yet, request samples before the layout is finalised — a rustic finish photographed on a phone screen almost never matches the board in daylight.

3. Send dimensions as an opening, not a box

Our solid wood wardrobes are made to measure, and each unit's layout, finish and dimensions are specified per project. A useful dimension pack contains:

  • The room elevation with finished floor level, skirting height, ceiling height, and the position of doors, windows, switches and air-conditioning grilles.
  • Clearance for door swing — hinged rustic doors need wall clearance at the handle side; sliding layouts need track depth recorded in the overall dimension.
  • Out-of-plumb and out-of-level readings where the walls are old. In villa renovations this is common, and scribing to the wall is a production decision, not an installer's improvisation.
  • Whether the unit runs floor-to-ceiling or stops below a cornice, and how the top is finished where it is visible.

Confirm every dimension after the flooring and plaster are complete. Built-in joinery is made to the numbers you sign off, so measurement taken before the finishes are laid is the most frequent cause of on-site rework.

4. Specify the interior around how the room is used

Rustic solid wood carcasses are usually specified for master bedrooms, guest rooms and dressing rooms in villas and serviced apartments, and the internal layout should follow the occupant rather than a catalogue default. Tell us:

  • The split between long hanging (dresses, coats), double hanging rails, shelf storage and drawer zones — and the number of each.
  • Whether you want a walk-in wardrobe layout with an island or perimeter runs, or a fitted wardrobes arrangement along one wall.
  • Drawer construction and runner type, plus soft-close as standard or optional.
  • Internal lighting: door-triggered, motion-activated, or always on, and where the transformer is allowed to sit for servicing.
  • Special storage — luggage height, an ironing-fold-out, a safe bay, or a vanity surface.

Where a project mixes styles, that is worth stating too. A villa in Sydney or Melbourne often pairs rustic joinery in the bedrooms with cleaner minimalist bedroom wardrobes elsewhere; we build both under one order and keep the carcass construction consistent across them.

5. Agree the sample and sign-off sequence in writing

For a custom order we work through brief and design proposal, quotation with detail confirmation, then production, shipment and follow-up. Before production starts, ask for: a material board (species, finish, sheen, hardware), one door or panel sample carrying the full rustic treatment, and a signed dimension drawing. Record who signs each stage and what happens if a later stage changes. This single page of process is what turns a made-to-measure order into a predictable one.

6. Cover delivery, packaging and installation

Solid wood needs to arrive intact and then acclimatise. Specify in the brief: sea, air or rail freight and the Incoterms you are buying on; packaging standard for finished doors (edge protection and separate panel packing matter most); container loading sequence against your site access; and whether installation is by our team, your builder, or both. Our service covers door-to-door delivery, installation and after-sales support, including inspection of snags and spare parts — but the split of responsibility between supplier and local contractor should be agreed before order confirmation, not at handover.

Also state the storage conditions on site. A rustic solid wood wardrobe delivered into an unsealed, unairconditioned building will move before it is ever used; a clause covering where the units wait and when they are fitted protects both sides.

Putting the brief together

A complete enquiry pack for a custom rustic solid wood wardrobe contains: species and substitution clause; distressing, texture and sheen definition with sample references; knot and sapwood policy; measured room elevations taken after finishes; internal layout by zone; door style and hardware; sample and sign-off sequence; freight terms and packaging standard; and the installation split. Send those eight items and a quotation can be prepared on the first pass rather than after three rounds of clarification.

Send your drawings, reference images and room dimensions to us with a note naming the project location and target completion date, and we will confirm materials, layout and price for your project wardrobe order before anything goes into production.