A wardrobe quotation that looks complete on the first read is often the hardest one to compare. Two suppliers can both write "glossy melamine wardrobe, made to measure" and deliver very different products, because those words say nothing about the board behind the finish, how the door is edged, which hardware is fitted, or who signs off the drawing before cutting starts. If you are sourcing Glossy Finish Melamine Wardrobes for a villa or apartment package, the assessment work happens line by line on paper, long before any panel is cut.
What a serious proposal must state before prices are comparable
Glossy melamine doors expose every weakness in the surrounding build. A reflective front amplifies uneven reveal lines, a wall that is out of plumb and a carcass sitting proud of the floor. That is why a serious proposal for this finish reads differently from a catalogue price list: it describes how the unit will be fitted to the actual room, not merely how large the box is.
Before comparing prices between manufacturers, confirm that each document answers the same five questions:
- Which substrate carries the glossy melamine face, and what thickness is specified for doors, carcass and back panel?
- How are door edges finished - edge band material, colour match and joint quality at corners?
- Which hardware brand and model are named for hinges, slides, handles and internal fittings, or is the item left as an allowance?
- Who produces the shop drawing, and what is the sign-off step before production begins?
- What dimensional tolerance is allowed on site, and how are out-of-level floors and ceilings resolved?
If a supplier will not commit these points in writing, the number they quote is not comparable with anyone else's.
Reading the specification: finish, board and edges
The finish name alone tells you very little. Ask for the surface to be described in terms you can inspect: reflectivity level, whether the panel is single-sided or double-sided faced, and what the reverse side looks like on a door that opens into a dressing room. Because the same melamine family is offered across several surfaces, check that your glossy wardrobe doors, any matte finish melamine wardrobe specified for a second bedroom, and high gloss melamine cabinets in the adjacent kitchen are quoted as one coordinated set of surfaces rather than three separate guesses at the same colour.
Board choice drives cost more than the decorative face does, and it is where vague proposals hide margin. A quotation that says only "melamine board" should be pushed back on until the substrate, thickness and edge treatment are named. Edge banding is the detail most often argued about afterwards: a thin band with a visible seam along a glossy door is obvious under raking light, and no amount of goodwill fixes it once installed.
Seven checkpoints for a made-to-measure wardrobe proposal
| Checkpoint | What to look for in the document | Question to put to the manufacturer |
|---|---|---|
| Layout and internal zoning | Hanging heights, shelf spacing, drawer positions and any dressing island or corner return drawn to your plan, not a generic module. | Which zones were set from our room drawing, and which are defaults? |
| Made-to-measure basis | Whether dimensions come from a site survey, architectural drawings or your own tape measurement, and who carries the risk of a discrepancy. | Will you verify openings on site or on the coordinated drawing before release to production? |
| Door type and clearance | Hinged, sliding or open configuration, plus the clearance each needs against beds, doors and skirting. | Confirm the door type works with our furniture layout at the specified opening width. |
| Hardware schedule | Named hinges, slides and handles with load rating and cycle expectations, or an explicit option list. | What is substituted if the named item is unavailable, and does it change the price? |
| Finish samples | Physical sample of the glossy panel with edge band attached, viewed under site lighting. | Can you send a door sample including the edge detail, not just a face offcut? |
| Shop drawing and sign-off | A dated drawing revision, with your approval recorded before cutting. | How many drawing revisions are included, and what happens after we sign? |
| Packaging, delivery and installation | Pack list by room, protection method for glossy fronts, who installs and who inspects snags at handover. | Is installation quoted as part of the package or left to a local trades party? |
A manufacturer who answers all seven in writing is showing you where their process sits. A supplier who answers three and treats the rest as "standard" is asking you to accept risk at the cheapest point in the chain.
Who is producing it, and how far coordination goes
Assessing the maker matters as much as assessing the paperwork. Built-in joinery has to match kitchen cabinetry, wall panelling, doors and flooring, so a single manufacturer handling several scopes removes the arguments about where one trade's work ends and another's begins. SANTERSON supplies built-in furniture as part of a wider range of furniture and building materials, with wardrobes produced to project-specific dimensions, finish and layout rather than to a fixed catalogue module.
Where a design calls for something outside the standard range, custom & OEM service covers bespoke finishes, textures and layouts, with prototyping and material selection handled by the same factory that runs production. For buyers assembling a whole apartment or villa package, that also means one party coordinates drawings for wardrobes, kitchen cabinetry and other joinery instead of three suppliers passing a drawing back and forth.
Delivery, installation and the clauses to read closely
Glossy fronts are the part most likely to be damaged between the factory and the bedroom door, so packaging and handling arrangements belong in the assessment. Ask how panels are protected, how the pack list is organised by room, and what happens if a panel arrives chipped: replacement lead time, who pays freight, and whether the affected unit can be remade without restarting the whole order.
For international orders, logistics and door-to-door delivery covers freight arrangements, export paperwork and container loading. Confirm for your own project which leg of the journey is included, who acts as importer of record, and what happens after the container reaches your city. Installation and after-sales support covers on-site fitting, inspection and snag resolution; agree in advance whether the manufacturer's team installs or supervises a local crew, since that choice changes both price and accountability.
Warranty periods, response times, freight terms and delivery commitments vary by project and destination. Have them stated for your specific order rather than assuming any published figure applies to you.
A short pre-order checklist
- Substrate, panel thickness and edge banding named for doors, carcass and back panel.
- Physical glossy sample with edge detail reviewed under the same lighting as the room.
- Hardware schedule with named items and stated substitutions.
- Drawing signed off by you, dated, with revision count agreed.
- Site verification of openings and floor level agreed before production release.
- Packaging, pack list and damage-replacement route agreed in writing.
- Delivery scope, installation responsibility and snag process confirmed for your destination.
Run those seven items against every quotation you hold and the comparison becomes straightforward: you are no longer choosing between numbers, but between documented processes. If you want a proposal assessed line by line, send your drawings and specification to SANTERSON for a review of materials, layout and delivery scope for your project.
Share your floor plan, preferred finish and hardware preference to receive a made-to-measure wardrobe specification and quotation aligned to your project drawings.