Folding doors are easy to specify on a drawing and hard to sign off in a meeting. A wood veneer folding door sits at the junction of three conversations: the interior designer wants a continuous timber grain across the elevation, the contractor wants an opening that tracks cleanly on site, and the client wants a finish that still looks right five years after handover. When those three parties approve different things, the door becomes the project's problem.

Santerson Wood Veneer Folding Doors are made to measure, with finish, layout and dimensions specified for each project. That flexibility is the reason approvals matter: nothing arrives as a standard catalogue item, so every decision has to be recorded before production starts. This guide sets out a practical approval sequence for architects, main contractors, procurement leads and villa owners, using the stages SANTERSON already works through on villa and hospitality projects.

Why Wood Veneer Folding Doors Need a Different Approval Path

A hinged door can be approved from a schedule: size, fire rating if required, leaf count, ironmongery. A folding door carries all of that plus an operating mechanism, a track arrangement, panel widths that add up to the opening, and a stacking side. Timber adds one more layer, because veneer is a natural material whose figure varies with light and grain direction.

In practice this means approvals are not one signature but a chain of small confirmations. Get the order wrong and you will re-open decisions after tooling has started. The sequence below keeps each party's sign-off in the place where it can still be changed without cost.

Stage 1 — Fix the Design Intent Before Anyone Prices Anything

Before requesting a quotation, put one page in front of the design team that answers four questions. Each answer needs a name against it.

  • Where does the stack park? Folding doors need a pocket or a stacking side. Decide which wall the panels fold against, and check that nothing — a light switch, a radiator, a curtain track — sits in that zone.
  • How many panels, and how wide? Panel count follows from opening width and the leaf width the project will accept. This drives both appearance and hardware choice.
  • Which face gets the grain? Veneer can be laid book-matched, slip-matched or reversed. State the matching pattern on the drawing, not in a caption.
  • Is the door acoustic or visual? A door that divides a living space from a study has different expectations from one used occasionally to close off a guest suite. Say which.

Design intent is where interior design services normally add the most value on villa work: layout planning, concept and finish schemes, and coordination drawings that production can actually build from. If your team does not produce folding-door details in-house, ask for them at this stage rather than at order.

Stage 2 — One Sample Board, Signed by the Right Three People

A veneer approval fails most often because the sample was judged in the wrong light. Request a finish sample and assess it in the room where the doors will be installed, at both day and evening light levels, against the flooring and joinery that sit beside it.

Practical rule: the sample board should carry three signatures — designer (aesthetic match), client (acceptance of natural variation in grain and colour), and site lead (confirmation that the finish can be protected during the remaining works). One signature is not an approval.

Also record what the sample does not show: edge treatment, the look of the frame reveal, and how the veneer meets skirting or architrave. Those are separate decisions and belong on a detail drawing, not on a colour chip.

Stage 3 — Site Conditions the Contractor Must Confirm

Most folding-door defects trace back to the opening, not the leaf. Before dimensions are released for manufacture, the contractor should confirm the following in writing:

CheckWho confirmsWhy it blocks production
Head height allowance for track and hardwareSite lead / architectCeiling and floor build-up changes the clear opening after the drawing is issued
Floor level and finish tolerance along the openingFlooring contractorBottom guidance depends on a level run, not a nominal dimension
Wall build-up at the stacking sideMain contractorReveal depth decides frame detail and whether pockets are viable
Flooring sequence relative to door installationProgramme managerThreshold detailing depends on which trades finish first
Access route for delivery and handlingSite agentFull-height panels need a usable route to the opening

Santerson Wood Veneer Folding Doors are made to measure for each project, so these confirmations should be closed before final dimensions are agreed — not adjusted afterwards. A single site query answered on the wrong side of that line is usually the most expensive email in the package.

Stage 4 — Procurement: What to Put in the Requisition

Procurement approvals move faster when the requisition is unambiguous. For a made-to-measure joinery item, include:

  • The drawing reference and revision number the order is based on — quote from a revision, never from a date.
  • Confirmed sample reference for veneer species and finish, with the signed board retained as project property.
  • Opening sizes by door set, each tied to a room or mark number on the schedule.
  • The scope boundary: what is supplied, what is installed, and who carries ironmongery, glazing panels if used, and making good.
  • Delivery location and packaging expectations, matched to the site access route confirmed at Stage 3.

On projects where doors are bought alongside other joinery — cabinetry, wall panelling, wardrobes — consolidating them with a one-stop furniture and building materials supplier reduces the number of separate approvals you have to chase. Fewer suppliers means one dimensional survey, one delivery window, and one snag list instead of four.

Where the project carries its own brand or finish standards — a hotel group with a joinery specification, for example — raise that at requisition stage as well. Bespoke finishes, textures and branding are handled through custom and OEM service, which covers material and finish selection and project-specific detailing rather than a fixed catalogue range.

Stage 5 — Pre-Production Sign-Off: The Gate That Saves the Job

Ask for an approval drawing back from the manufacturer before production starts, and treat that document as the contract. Read it against your own schedule and check four things line up:

  • Panel widths and stacking direction match the design intent recorded at Stage 1.
  • Veneer matching pattern is drawn, not assumed.
  • Frame and reveal details correspond to the confirmed wall build-up.
  • Every door mark on the drawing matches a line on your schedule.

One named person should sign that drawing. On a villa project that is usually the designer or the owner's representative; on a hospitality job it is normally the fit-out coordinator. Rotate responsibility and you lose the audit trail exactly when you need it.

Stage 6 — Delivery, Installation and Handover Approvals

The last two sign-offs are operational. On arrival, check packaging integrity and count door sets against the packing list before anything is moved inside — damage claims are far easier on the delivery day than after unpacking. SANTERSON handles freight by sea, air and rail with customs documentation and door-to-door delivery, so the receiving party on site should still be nominated in advance; a delivered container with no named receiver becomes demurrage.

At installation, run an operating check on every set: full travel without binding, consistent effort across panels, and closure at both ends of the run. Record defects as a snag list with door mark numbers, and keep it separate from general joinery snags so nothing gets signed off by association.

For handover, give the client two things: the snag list closed out, and clear guidance on how the doors are to be operated and cleaned. Folding mechanisms fail most often through misuse rather than wear — forcing a panel against its stacking direction is the usual cause. That note belongs in the client manual, not in a conversation on site.

A One-Page Approval Register

If you take one document from this article, make it this register. Print it, and do not release production until every row has a name and a date.

DecisionApproverClosed when
Stacking side and panel layoutDesigner / architectDesign intent sheet issued
Veneer species, finish and matching patternDesigner + clientSample board signed in situ
Opening dimensions and floor levelsSite lead / flooring contractorDimensional survey returned
Scope boundary and ironmongeryProcurementRequisition approved
Approval drawingNamed single approverBefore production release
Delivery receipt and snag closureSite agent / client repHandover pack signed

Frequently Asked Questions

When should the folding door be specified in a villa programme?

Specify at the same time as other joinery, not later. Panel layout affects wall build-up and ceiling levels, so a late decision forces changes in trades that have already priced their work.

Who signs off veneer variation?

The client, with the designer present. Veneer is a natural material and individual panels will vary in figure. Approving a sample board while explicitly acknowledging that variation prevents disputes at handover.

Can folding doors match existing cabinetry on site?

They can be specified to a matched finish, but the comparison should be made against a physical sample in the actual room. Photographs and written colour names are not an adequate basis for a timber approval.

What is the most common cause of a failed folding door installation?

Dimensional conflict between the drawing and the built opening — usually head height or floor level. Confirming those two items on site before final dimensions are agreed removes most of that risk.

Santerson Wood Veneer Folding Doors are supplied as made-to-measure joinery with project-specific dimensions, material and finish options. For a villa or hospitality package where doors, cabinetry and panelling need to be coordinated rather than procured separately, SANTERSON works from design consultation through production, delivery and installation on residential and hospitality projects. Confirm the specification for each door set at approval stage.