A full height media wall is one of the most heavily used built-ins in a home or hospitality suite. It carries a television, hides cabling, holds books and objects, and its doors and drawers are opened every day. Because Santerson Full Height Media Walls are made to measure — with finish, layout and dimensions specified per project — the after-sales conversation is not about a spare part off a shelf. It is about who supports a configuration that only exists in your drawings. Before you place an order, here are the details worth putting in writing.

1. Which exact configuration your records refer to

Made-to-measure work creates the first after-sales risk: a vague reference. When something needs attention two years later, "the media wall in the living room" is not enough for a factory that built it from an approved shop drawing. Ask what documentation you will receive at handover — final dimensioned drawings, the finish and material schedule, hardware references, and the layout of any integrated lighting or cable routes behind the panels. Keep that pack with your project file. It is what turns a warranty claim into a straightforward replacement rather than a re-survey and a new quotation.

2. What the warranty actually covers on a built-in

Santerson's service pages describe warranty coverage, spare parts and replacement, and ongoing maintenance as part of after-sales support. Ask the specific questions: does cover extend to panels, carcasses, doors, hinges, slides, and integrated lighting, or only to certain elements? What is excluded — impact damage, moisture exposure, wall movement, or modifications made on site by others? Which party in your chain (developer, builder, designer or end owner) is the recognised claimant? Get the answers in the order confirmation, not in a brochure.

3. How spare panels and hardware are supplied

With configurable systems, a replacement panel has to match a batch: veneer direction, lacquer sheen, melamine grain and edge banding all vary between production runs. Ask whether you can order a matching spare set of doors or shelf panels at the same time as the main order, and how long identical material can be reproduced. For hardware, ask which hinges, slides and lift-up fittings are used and whether they are standard items available locally or proprietary parts shipped from the factory. Buying one extra set of hinges at the time of manufacture costs very little; sourcing them later, from a different batch, is where problems start.

4. Who fits it on site, and what happens when it moves

Santerson lists installation support and inspection or snag handling among its after-sales services. For a floor-to-ceiling media wall this matters more than for a loose sofa: alignment, wall fixings, concealed door tracks and the reveal around a recessed TV all depend on the fitting stage. Clarify who performs the installation in your country, who signs off the snags list, and what happens if the unit shifts after handover — settlement, floor-heating cycles or simply a loose fixing. Also confirm how the wall is handled if you ever need to remove it for a television upgrade, especially on integrated TV panel designs where the screen sits inside the joinery.

5. Electrical, lighting and access to failed drivers

Many media wall projects include integrated LED media units, backlit niches or lit display shelving. Three details decide whether the after-sales stage is calm or chaotic: which party supplies and connects the transformers and drivers, where the access point for a failed driver sits, and who replaces a strip light that fails behind a closed panel. Ask for an accessible service hatch or a removable back panel to be shown on the drawing before production. Retrofitting access after installation is the single most expensive avoidable item in media wall work.

6. Response times and how a claim is raised

The contact page states that enquiries receive a response within 24 hours, and the after-sales pages list response and issue-resolution aims along with installation support. Treat those as terms to confirm for your project rather than assumptions: ask which channel you use (email, WhatsApp or your project contact), what evidence is expected — photographs, the drawing reference, a short video — and how remote assessment works when the factory sits in China and the property does not. For villa and apartment programmes with several identical units, ask whether one consolidated claim covers all of them or each unit needs its own record.

7. Maintenance guidance you can hand to the owner

Ask for written care instructions matched to the finishes you actually specified: what to clean matte lacquer and acrylic panels with, how to wipe veneer without lifting an edge, how often to lubricate or tighten sliding hardware, and what to avoid on backlit feature wall surfaces near heat from a television. Owners who receive that one page at handover cause far fewer warranty claims than owners who guess. It also protects the specifier: if damage comes from the wrong cleaning product, the record shows what was advised.

8. Documentation to request before production starts

  • Final approved shop drawings with dimensions, panel layout and TV recess details
  • Material and finish schedule naming every surface, edge and hardware item
  • Warranty terms in writing: scope, duration, exclusions and who may claim
  • Spare-parts list with the option to order matching spares with the main order
  • Installation and snag sign-off sheet, plus maintenance instructions for the owner

None of these requests are unusual. A supplier that coordinates design, production, delivery and installation as a single scope should be able to answer all of them in a single reply. If the answers arrive vague or split across three parties, that is your signal to tighten the contract before the panels are cut — which is exactly where after-sales costs are decided.

To discuss a media wall, storage wall or full joinery package for a villa, apartment or hospitality project, contact SANTERSON through the contact page and send your drawings with the room dimensions.