A custom classic sideboard is one of those pieces that quietly sets the tone of a dining room, entryway or villa living area. It has to look right for years, hold tableware and glassware safely, and still fit a wall that was never designed for standard furniture. That is exactly why the detail stage between "approved design" and "start production" matters so much. Most disputes on made-to-measure cabinetry do not come from bad workmanship; they come from questions nobody asked before the panels were cut.

If you are specifying classic sideboards for a home renovation or an interior project, the checklist below covers what we ask every buyer to lock down before manufacturing begins.

1. Measure the wall, not just the furniture size

Send the wall elevation, not only the length you want the sideboard to be. A classic sideboard usually runs against a finished wall, and small site conditions change the build:

  • Overall width, height and depth measured at the finished surface level, including skirting, architraves and any rebate.
  • Floor levelness across the run — an out-of-level floor shows up instantly on a long, low cabinet with a stone top.
  • Position of power outlets, switches, light points, radiators and downlights that must be avoided, cut around or kept accessible.
  • Door and drawer swing paths, plus clearance for a pull-out counter, bar area or dining chair behind the unit.
  • Whether the unit is freestanding, wall-mounted or built into a recess — wall mounted sideboards need confirmed substrate and load-bearing support before we fix anything.
Confirm dimensions on site after the wall finishes are complete. Measuring off a drawing or an unfinished wall is the single most common cause of rework on custom cabinetry.

2. Interior layout and what actually goes inside

"Classic" describes the door style, not the internal function. Before production we need a shelf and storage plan based on how the piece will be used:

  • What is stored: glassware, dinner services, linen, bottles, small appliances, or display objects.
  • Fixed versus adjustable shelving, and the clear height each shelf needs for tall items.
  • Drawers, cutlery trays, pull-out racks, or open display niches — and which side they open towards.
  • Whether any section is glazed. Glass front dining cabinets change the frame detail, glass type, hinge loading and lighting provision.
  • Appliances or provisions: a wine fridge, coffee machine, socket inside the cabinet, or integrated LED strip lighting all need decisions made before panels are machined.

For rooms that need more than a low sideboard, a tall dining cabinet or a matching buffet cabinet can be built to the same door profile and finish, so the whole wall reads as one joinery scheme instead of three separate purchases.

3. Materials, finishes and the sample you sign off

Written names are not enough for a colour or a grain. Confirm the actual material set:

  • Carcase and door substrate, and whether doors are solid wood, veneer, lacquered or foil-wrapped.
  • Finish system and sheen level — matte, satin or high gloss — plus the edge treatment on visible edges.
  • Countertop material if a stone top is specified: slab batch, thickness, edge profile, and whether the joint to the wall is sealed or shadow-gapped.
  • Hardware brand and type: hinges, soft-close runners, handles or integrated pull profiles, and load rating for deep drawers.
  • A physical sample board of door colour, veneer grain and countertop offcut, approved in writing before production starts.

Our custom furniture design and prototyping service covers 3D modelling and material selection across wood, metals, engineered stone and laminates, so the sample you approve is the sample we build to.

4. Drawings, tolerances and who signs what

Before any panel is cut, we ask for sign-off on:

  • Shop drawings with overall and internal dimensions, door elevation, handle positions and opening directions.
  • The interface detail with floor, ceiling and adjacent walls, including scribe or filler widths for uneven sites.
  • Electrical and lighting points: cable routes, transformer access, and where a driver can be reached for maintenance.
  • Assembly method — built on site or delivered as sub-assemblies — and access routes through doors, lifts and stairwells.

One named approver per project keeps this clean. When drawings are approved by a designer in one country and the site team measures in another, that is where dimension changes arrive after production has begun.

5. Quantities, phasing and delivery logistics

  • Quantity per type and whether the order ships in one release or in phases by floor or unit.
  • Incoterms and delivery address, packaging standard, and container loading plan for oversized carcasses and stone tops.
  • Import documentation for the destination country — commercial invoice, packing list and certificates as required.
  • Storage on site: a delivered cabinet needs a dry, secure place until the finishes around it are complete.

Our logistics and door-to-door delivery service handles freight by sea, air and rail with customs paperwork and shipment tracking arranged for the project.

6. Confirm the installation sequence and handover

  • Where the sideboard sits in the site programme — after painting, flooring and glazing are complete.
  • Who prepares the wall, who connects power, and who protects the unit while other trades finish around it.
  • The snag list at handover: door alignment, drawer runners, glass fit, lighting function and finish condition.

We provide installation and after-sales support, including on-site fitting guidance and inspection with the project team, so the approved drawing is what you actually receive.

Before You Release the Order to Production

Production sign-off checklist
  • Site-measured dimensions taken off finished surfaces, signed and dated.
  • Internal layout confirmed for storage, glazing, appliances and lighting.
  • Approved physical samples of finish, veneer, hardware and countertop.
  • Shop drawings approved by one named person, with opening directions marked.
  • Delivery address, phasing and import documents agreed.
  • Installation window and site readiness confirmed with the builder.

Send us your wall elevation, a photo of the space and a note on what you want to store, and we will return shop drawings and a quotation for the configuration — including matching decorative dining cabinets if the whole wall needs to be resolved as one scheme. For projects that combine joinery with other fit-out items, our turnkey project solutions cover cabinetry alongside the rest of the furniture and building materials package.