Slim-framed Modern Slim Frame French Doors look finished and fragile at the same time: narrow sightlines, large glass areas, and a frame that shows every dent. That is exactly why packaging deserves the same attention as the door specification itself. Before an order for these made-to-measure doors leaves the factory, buyers should confirm how each leaf and frame component is protected, how it is crated, what the packing list records, and what arriving on site is expected to look like.
Santerson Modern Slim Frame French Doors are part of the French Doors collection for residential door projects. Finish, layout and dimensions are specified per project, with made-to-measure sizing and material and finish options, and each set of dimensions and specifications is confirmed for the specific order. Because the doors arrive as project-specific joinery rather than stock units, packaging is not a generic afterthought — it has to match the opening sizes, the number of leaves, the glazing type and the sequence in which the doors are installed.
Why Packaging Decides the Result for Slim-Frame Doors
A slim frame carries the same handling loads as a heavier door, but with less material to absorb them. Corner impacts that would leave a mark on a wide stile can bend or nick a narrow one. Large glazed leaves also react to point pressure and to being stored flat for long periods, so the way a leaf is supported in its crate matters as much as the outer case.
For project buyers there is a second reason. Slim-frame French doors are usually installed late in a fit-out, after flooring, wall finishes and joinery are complete. A damaged door at that stage does not just delay one item — it holds up painting, flooring touch-up and handover. Confirming packaging before production ends is far cheaper than arranging a replacement frame across international freight.
What to Confirm About the Door Itself Before Packaging Is Fixed
Packaging follows from the specification, so confirm the door details first and keep them in one written record:
- The exact opening sizes and the tolerance allowed at site, since made-to-measure leaves cannot be trimmed on site like solid timber.
- The leaf layout and number of leaves per opening, including any fixed sidelights or transoms that travel with the set.
- The selected material and finish, so the protective layer touching the surface is compatible with that finish and can be removed without leaving residue or shine marks.
- The glazing arrangement for each leaf, and whether glass is shipped loose in the same crate or glazed at the factory.
- Ironmongery, handles and any matching Arched French Doors or other door styles ordered for the same project, and which crate each item belongs to.
The Packaging Questions Worth Putting in Writing
Put these points into the purchase order or the pre-shipment confirmation, so the answer is on record rather than assumed:
| Question to confirm | Why it matters for slim-frame doors |
|---|---|
| Are leaves crated upright or laid flat, and how many per crate? | Upright storage reduces the risk of a large glazed leaf bowing under its own weight; overloading one crate concentrates load on narrow frame edges. |
| What protects the finished faces and the corners? | Narrow stiles show corner impacts first. Edge protectors and surface protection should be specified by finish type, not left to a standard carton. |
| How is glazing separated and blocked inside the crate? | Glass needs continuous support and cushioning between leaves so vibration in transit does not transfer through the frame. |
| Is the outer case suitable for the transport mode booked? | Sea freight exposes crates to humidity and long stacking; air and rail shipments have different handling and stacking profiles. The case should match the route actually used. |
| How are crates marked, numbered and referenced to openings? | Project-specific doors go wrong when a crate cannot be matched to an opening. Crate numbers should map to the same door schedule the installer works from. |
| What does the packing list show for each crate? | A clear per-crate list lets site teams check contents at delivery instead of discovering a missing leaf weeks later, and supports customs paperwork. |
| How are loose ironmongery and hardware packed? | Hardware should be boxed and identified against its leaf, not thrown loose into the base of a large crate where it can abrade a finish. |
| What photographs or inspection records are provided before the crates close? | Pre-closure photos of finished leaves and frames give both sides a reference point if damage is claimed after delivery. |
Matching Packaging to the Delivery Route
Santerson's logistics service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. Ask how these doors will actually travel for your project and let that answer drive the crate specification: a full container loaded with other joinery needs different protection from a consolidated share of a container, and an air shipment of a small villa order has fewer handling legs but tighter size limits.
Also confirm how the doors sit in relation to heavier items. Frame sets should not be stacked under cabinetry or flooring cartons, and the loading plan should keep glazed leaves away from container walls where condensation and impacts occur. If your project orders several product groups together — for example Windows and Doors alongside furniture and building materials project procurement — agree the crate grouping and loading sequence before the container is booked, so doors arrive last or are staged for late installation.
Receiving the Doors on Site
What you confirm at delivery should mirror what you confirmed before shipping:
- Count crates against the packing list, and check crate numbers against the door schedule for each opening.
- Record any case damage with photographs before signing, rather than noting it as "apparent good order".
- Open only what is needed to verify contents and finish condition, keeping protection in place until installation.
- Store crates upright, off the ground, in dry conditions, and away from trades working on wet finishes.
- Report frame or glazing damage immediately with the crate number, pre-shipment photos and delivery photos together.
Santerson's installation and after-sales service covers on-site installation, inspection and snag lists, warranty coverage, spare parts and replacement, and ongoing maintenance. The response times stated on that page are the supplier's own claims, so confirm what applies to your order, including how a damaged or incorrectly supplied door is handled and what evidence is required.
How This Fits a Wider Project Order
Slim-frame French doors rarely stand alone. Villa and hospitality projects typically group them with other joinery and finishes, which makes packaging coordination part of procurement rather than a shipping detail. When the same supplier handles installation and after-sales support and furniture logistics and door-to-door delivery, ask for one crate schedule covering all joinery, with doors identified by opening number and marked for late installation. That single document is what protects the sightlines you specified from factory floor to handover.
Frequently Asked Questions
Are these doors supplied glazed or unassembled?
The product record for Santerson Modern Slim Frame French Doors describes made-to-measure sizing with material and finish options, and asks that dimensions and selected specifications be confirmed per project. Whether glass travels loose or is factory-glazed should be confirmed for your order, because it changes the crate design and the on-site work.
Can slim-frame doors be adjusted at site if an opening is slightly out?
Do not assume so. Made-to-measure leaves and frames are specified to confirmed openings, so site adjustment should be treated as outside the normal scope unless it has been agreed in writing. Confirming opening sizes and tolerances before production is the practical control.
What is the minimum information I should ask for about packaging?
Crate count, leaves per crate, orientation, edge and face protection by finish type, hardware packing, crate numbering against the door schedule, and pre-closure photographs. Those six answers cover most of the risk.
Do other Santerson door styles share the same packaging approach?
The French Doors collection includes made-to-measure styles such as Arched French Doors and Classic French Double Doors, and each carries the same instruction to confirm dimensions and specifications per project. Packaging should therefore be specified per item, not copied across a whole door order.