A Minimalist Black Frame Wardrobe is a deceptively fragile shipment. The aluminium frame profile looks robust, but its black surface finish marks easily; the infill panels are glass or board, and both travel thousands of kilometres by road and sea before they ever reach a site lift. Most damage claims trace back to what was agreed before the crate was built, not to how carefully the wardrobe was made. This article lists exactly what procurement teams, builders and interior contractors should confirm in writing when packaging built-in furniture for import.

Why Frame-and-Panel Wardrobes Are a Special Packaging Case

Frame wardrobes are not a single solid unit. They arrive as separate components — vertical and horizontal aluminium profiles, infill panels, doors, hardware, and internal fittings — that must be reassembled on site. That creates three distinct risks in transit.

  • Surface marking on the frame. A black anodised or powder-coated profile shows scratches and abrasion far more visibly than a natural aluminium or wood-grain finish. Contact between profiles, or between a profile and the inside of a carton, leaves marks that cannot be polished out on site.
  • Panel edge and corner damage. Glass infill and board panels fail at the corners and edges, not in the middle. If the corner is unsupported inside the crate, an impact during loading or unloading travels straight into the panel.
  • Mixed-pack confusion. One wardrobe set may be spread across several packages with different weights and dimensions. If the package list does not match what each carton actually contains, installers lose time on site and small parts go missing.

Because our wardrobes are made to measure for each project — with layout, dimensions and finish options specified per space — there is no standard export carton that automatically fits. Packaging has to be specified alongside the product, not left as an afterthought at the end of production.

The Packaging Specification to Agree Before Production Ends

Ask for the packaging plan in writing before goods leave the factory. A usable specification answers the following questions.

1. What is the package type and grade?

Confirm whether components ship in cardboard cartons, plywood crates, or a combination, and which grade applies. For sea freight and multiple handling stages, plywood crates with internal bracing are usually specified for glass panels and frame profiles, while lighter internal fittings may travel in cartons inside or alongside the crate. Ask what the packaging is rated for: ocean transit, transfer between depots, and final-mile delivery to a residential site.

2. How are frames separated and protected?

For a black frame wardrobe specifically, confirm that profiles are interleaved with protective material rather than stacked face-to-face, and that the profile ends are protected against denting. Ask whether corner protectors and edge guards are used on the frame assembly, and whether the finish is protected by film that stays in place during handling.

3. How are glass and board panels supported?

Panels should be packed upright or flat according to how they will be handled on site, with cushioning at every contact point and no direct panel-to-panel contact. Confirm that the crate keeps panels from shifting, and ask how glazed panels are identified on the outside so that handlers know to treat that package with care.

4. What moisture protection is used?

Sea freight moves through condensation cycles. For board-based components and any timber-look elements, ask what moisture barrier, desiccant or vapour-resistant wrapping is applied, and whether the packaging protects the goods during storage at the destination before installation.

5. How are hardware and internal fittings handled?

Hinges, slides, handles, rails and adjustment hardware should be bagged, boxed and matched to the correct component group. Confirm that small parts are not simply thrown loose into a larger carton, and that each set is labelled with the room or wardrobe unit it belongs to.

6. How is every package marked and referenced?

Each package should carry a mark that ties it to the drawing or schedule line it comes from — a unit code, room reference or position number that matches your installation drawings. Fragile and orientation markings should be on the outside of every glazed crate. This is what allows a site team to sort packages by wardrobe unit on arrival instead of opening everything.

Documentation That Has to Match the Physical Packages

Packaging is only as good as the paperwork describing it. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs documentation, packaging and container loading, shipment tracking and final delivery. The documents you should expect to receive and be able to check include:

  • A packing list showing every package number, its contents, dimensions and gross weight.
  • A commercial invoice consistent with the packing list and with the order confirmation.
  • Certificate of origin and any import documentation required for your country.
  • Loading plan or container stowage information, useful when you are planning site access and unloading labour.

Check the packing list against your order schedule before shipment. If a wardrobe unit is split across three packages, that split should be visible on paper as clearly as it is in the yard.

Container Loading and Site Access: Two Details Buyers Often Miss

Ask how the crates will be loaded and secured. Blocking, bracing and dunnage inside the container matter as much as the crate itself; a well-built crate that shifts in transit arrives damaged. If your order combines wardrobes with other items from one supplier — kitchen cabinets, doors, panelling — confirm whether the loads are consolidated and how heavy crates are positioned relative to lighter goods.

Then check the last leg. Crate dimensions must pass the lift, stairwell, corridor and door widths at your site. Request package dimensions early enough to verify this against the building, because an oversized crate cannot be resized after it is built. This is a common constraint in apartment and terrace projects where built-in joinery is delivered to upper floors.

Receiving Inspection: What to Record on the Day

Agree the inspection routine with your supplier before goods arrive, so both sides know what a valid claim looks like.

Point of check What to record
Crate exterior Photograph every package before opening, including any punctures, splits, water staining or crushed corners, with the package number visible.
Package count Count against the packing list at the point of delivery, not after the site team has moved everything.
Frame finish Check profile faces and ends for abrasion and denting; on black finishes this is best done in good light before installation.
Panels Inspect edges and corners first, then surfaces. Note any chips, cracks or movement inside the crate.
Hardware sets Match each hardware set to its component group against the packing list before anything is discarded.
Packaging retention Keep original crates and inserts until installation is signed off; they are often needed for replacement shipments.

Report damage the same day with photographs, package numbers and the packing list reference. Claims that arrive after packaging has been cleared away are far harder to resolve, and replacements take time your programme may not have.

A Short Pre-Order Question List

Send these to any supplier quoting a frame-and-glass wardrobe for export:

  • Which package type will be used for frames, for panels and for hardware on this order?
  • How are black-finished profiles separated to prevent abrasion?
  • How are glazed panels supported at corners and edges, and how are they marked externally?
  • What moisture protection is applied for ocean transit and pre-installation storage?
  • What are the finished dimensions and gross weights of every package?
  • How will each package be labelled against the wardrobe unit or drawing reference?
  • Will the packing list, invoice and import documents be sent before arrival?
  • What is the agreed process and time window for reporting transit damage?

Suppliers who answer these questions with a concrete packaging plan are usually managing the shipment. Suppliers who answer "standard export packing" are leaving the specification to chance.

Where Packaging Fits in a Turnkey Wardrobe Order

Packaging is one stage of a longer workflow: consultation, design and planning, production, logistics, installation and after-sales. Because our wardrobes are made to measure — sizing, layout and finish options set per project — the packaging plan should be confirmed at the same time as the final production drawings, when dimensions are fixed but before crates are cut.

If you are coordinating several interior elements from one source, consolidating them under one logistics plan reduces the number of separate deliveries and claims to manage. Our one-stop solution covers material selection and product specification, manufacturing and quality control, project management and site coordination through to installation handover, with installation and after-sales support following delivery.

FAQ

Do made-to-measure wardrobes come in standard export cartons?

No. Made-to-measure sizing means package dimensions follow the actual unit, so request the finished crate sizes for your order rather than assuming a catalogue size.

Are glass infill wardrobes riskier to ship than panel-door wardrobes?

The risk is different rather than simply higher. Glass fails at edges and corners and needs rigid support and clear external marking; board panels are more tolerant of handling but are vulnerable to moisture and chipped edges. Both need a specified crate, not generic packing.

Should I ask for the same packaging on repeat orders?

Yes, and confirm it in writing. Once a packaging specification works for a given wardrobe type and destination, keeping it consistent across phases makes receiving inspection faster and makes damage easier to identify.

Before you place an order for frame-and-glass built-in furniture, get the packaging plan, package dimensions and packing list format in writing. Those three documents decide whether your wardrobes arrive ready to install or become a site problem.