A swim spa is one of the most requested items on a villa outdoor list, and one of the easiest to specify badly. The model name looks simple, but the shell length, water depth, jet count and installed electrical load behind it are what decide whether the installation runs smoothly or turns into an expensive change order. This guide walks through Outdoor Swim Spa WS-S06CT-L using the figures published in our catalogue, and sets out how to check whether that configuration suits your villa site.

In short: WS-S06CT-L is a roughly 6.7-metre-long shell with a 1400 mm water depth, a swim training system, a temperature setting function, ozone sanitation and an installed total power figure of 8.35 kW. It suits villas where lap-style swimming and year-round water temperature matter more than waterfall theatre or a very large jet count.

What WS-S06CT-L Actually Delivers on Site

The catalogue lists this model at 6670 × 2380 × 1400 mm. Read as a site plan, that is a footprint just under seven metres long and about 2.4 metres wide — a size that fits a side setback, a rear terrace or a courtyard where a full swimming pool would not fit at all. The 1400 mm depth is deep enough for genuine swimming and for adults to stand and move comfortably in the hydrotherapy section, while still being shallow enough that children can be supervised without deep-water anxiety.

The specification sheet lists one swim training system and 31 jets. That combination tells you how the model is meant to be used: a continuous current for laps and resistance work at one end, massage seating at the other. It is not configured as a water-feature showpiece — there is no waterfall in this model's feature list — so if the design intent is a dramatic focal wall of falling water, look at a different shell in the range instead.

Catalogue Specification for WS-S06CT-L

ItemAs listed in the catalogue
ModelWS-S06CT-L
Catalogue dimensions6670 × 2380 × 1400 mm
Swim training system1 set
Jet total31 pcs
Water pump / filter pump1 pcs / 1 pc
Control system1 set
LED lights4
Total power8.35 kW
Features shownWater jets, temperature setting, LED lighting, ozone, swim training system

Figures above are transcribed from the catalogue entry for this model. Treat them as the starting point for a specification conversation, not as a final order document — included equipment and electrical requirements must be confirmed for the configuration you select.

Step 1: Measure the Place Before You Compare the Jets

The most common mistake in villa swim spa procurement is comparing jet counts before the slab has been checked. Work in this order:

  • Clear footprint plus access. Take the catalogue length and width, then add room for steps, plant access and any coping or decking detail. Also check the delivery route: a seven-metre shell has to be able to reach the position on a truck and crane path.
  • Structural support. Confirm with your engineer what the slab, pad or terrace needs to carry once full of water, and whether the surrounding paving can be cut back and reinstated.
  • Electrical capacity. The catalogue lists 8.35 kW total power for this configuration. Your electrician should check the available supply, the dedicated circuit and protection required at the villa board before the order is placed, not after.
  • Drainage and plant location. Decide where filter equipment, any heat pump and service access will sit, since these need space that never appears in a marketing render.

Step 2: Match the Configuration to How the Household Will Use It

Within the same length band, small letter changes shift the equipment list. Two useful comparisons from our range:

  • Outdoor Swim Spa WS-S06CT is listed at 5880 × 2380 × 1400 mm with the same 31 jets, swim training system and 8.35 kW total power. If your site loses roughly 800 mm of usable length, this is the closer fit — and it does not list a temperature setting function in its feature set.
  • Outdoor Swim Spa WS-S06B-T is listed at 5800 × 2200 × 1420 mm with 40 jets, a swim training system and 8.75 kW total power — more massage seating in a shorter, narrower shell.
  • Outdoor Swim Spa WS-S06C keeps the temperature setting function but drops the swim training system in favour of three water pumps, 33 jets and a higher 9.95 kW figure — a hydrotherapy-first rather than swim-first choice.

The practical point: the letters after the number are not decoration. They change pump counts, jet totals, installed power and whether you get a swim current at all. Compare the full feature list of each candidate against your brief, because "about six metres" covers several quite different machines.

Step 3: Decide What Is Standard and What Is an Option

Two options that change the running cost, not just the price

Catalogue-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Two of these matter more than buyers expect on a villa project:

  • Heat pump and insulation. If the spa is meant to be used outside of warm months, the shell insulation and heating choice drive running comfort far more than the jet count does. Specify both at order stage so the electrical design accounts for them.
  • Filtration and sterilisation. Ozone appears in this model's feature list; sand filtration and UV sterilisation are listed as options. Decide which treatment train the local water authority and your maintenance routine actually support.

Availability and compatibility of options vary by model, so confirm the exact configuration for your shell rather than assuming an accessory from a brochure page carries across the whole range.

Step 4: Specify It Inside the Whole Outdoor Package

A swim spa rarely stands alone. Around it sit loungers, a shade structure, hard landscaping, lighting and often an outdoor kitchen or changing area — and these are usually bought from different suppliers on different schedules, which is where finishes stop matching and dates slip. Sourcing the water feature together with outdoor furniture for villas and resorts keeps frame finishes, cushion colours and paving tones in one specification.

Our turnkey villa furnishing service covers that coordination: design consultation and space planning, material selection and product specification, manufacturing and quality control, project management with site coordination, then installation and handover. If the swim spa has to align with cabinetry, bathroom fixtures, flooring and lighting elsewhere in the villa, one-stop furniture and building materials supply removes the need for you to reconcile five separate trade packages.

Step 5: Plan Freight and Site Access Early

A shell of this size arriving from overseas needs a freight plan that matches the site. Our logistics and door-to-door delivery service covers sea, air and rail forwarding, packaging and container loading, customs paperwork and shipment tracking to the delivery address. For your own risk register, confirm import terms, duties, insurance cover and transit time for your specific project before committing to a site programme — these vary case by case and are not something a catalogue can answer.

A Pre-Order Checklist for Your Project File

  • Site survey signed off: footprint, access route, crane or placement method, slab loading confirmed by your engineer.
  • Electrical design issued against the configuration's listed total power, including any heat pump option.
  • Written confirmation of included equipment for your shell: control system, swim training system, pumps, jets, lighting and ozone.
  • Options list agreed and priced: sterilisation, filtration, insulation, steps, spare parts.
  • Delivery terms, address and access window agreed in writing, with installation sequence defined.
  • Warranty scope, response arrangements and maintenance responsibilities recorded before handover.

Send us your villa's outdoor layout

Share the site plan, your intended use (daily lap swimming, hydrotherapy, family leisure) and your target installation window. We will match Outdoor Swim Spa WS-S06CT-L or a closer shell from our swimming pools and swim spas range to your space, and issue a specification and quotation for the exact configuration.

Contact: PHILLIP  |  Phone / WhatsApp: +86 139 2821 4007  |  Email: santerson@qq.com