Two-tone acrylic wardrobe doors look simple on a rendering: one light panel, one dark panel, a clean flat surface. On site they are among the easiest joinery items to get wrong, because the colour split, the board thickness behind the acrylic and the door opening method all have to agree before production starts. If you are specifying built-in storage for a villa or apartment package, the following points are worth locking down with your supplier before any panel is cut.

1. The colour split: where the two tones meet

Decide first whether the contrast runs vertically or horizontally, and which doors carry which tone. A common arrangement pairs a darker lower run with lighter upper doors so tall storage reads lighter near the ceiling; another splits long wardrobes into alternating tones to break up a wall of cabinetry. Send the supplier a reference image of the exact door you want, as our Two Tone Acrylic Wardrobes page shows, and confirm on the shop drawing whether the tone boundary sits on a door edge or continues across the carcass line. A boundary that crosses a rebated edge is where colour bleed and edge-banding mismatch usually appear.

Also confirm the tone of every visible surface: door faces, door edges, internal cabinet edges, plinth and any open shelf inserts. Acrylic sheet, edge banding and lacquered carcass board are made separately, so a "same grey" specification across three materials can produce three slightly different greys under bedroom lighting.

2. Door style and hardware must be chosen together

The opening mechanism changes what the door is made of and how thick it has to be. Two Tone Hinged Wardrobes use individual doors on concealed hinges, so each door needs a stable substrate and consistent hinge drilling across the run. Two Tone Sliding Door Wardrobes ride on a track and need clearance for the overlap panel, which reduces usable depth at the centre of the bay. Hinged doors also need clear swing space in front of the wardrobe; in a narrow bedroom corridor that alone can rule them out.

Ask for the hinge brand and load rating, the slide or track system, and whether handles are integrated grooves, push-to-open or surface-mounted. On high-gloss acrylic, protruding handles show up as fingerprints on every door; a milled groove keeps the two-tone plane uninterrupted.

3. Finish: gloss or matte, and how it is verified

Acrylic doors come in reflective and low-sheen surfaces, and the choice affects both the look and the after-sales conversation. Gloss surfaces reflect light and amplify the tone contrast, but they also show dust and fingerprints. If a softer appearance suits the scheme, Matte Acrylic Wardrobes hide handling marks more forgivingly, though matte films can be more sensitive to abrasive cleaning. Do not approve a finish from a photograph on a screen. Request physical door samples in both tones, view them in the actual room under day and evening light, and check the edge where the acrylic wraps the panel.

Where a design mixes materials rather than two acrylic colours — glass with acrylic, for example — confirm how the two are joined and whether the framing profile is supplied by the same factory. A Glass & Acrylic Combination Wardrobe involves a third supplier line, so tolerances and colour matching need to be checked against one another.

4. Dimensions, substrate and the room itself

Custom wardrobes are made to measure, but "made to measure" only works if the site measurement is taken at the right stage. Confirm finished floor levels, wall flatness, skirting, architraves, light switches, air-conditioning grilles and any ceiling bulkhead that the wardrobe has to scribe around. Record heights at several points on long walls; older buildings rarely give you a straight line over three metres. Then confirm with the supplier the substrate behind the acrylic face, the panel thickness, and how tall a single door can be before it needs reinforcement or a supporting profile. A door that is too tall for its board will sag at the hinge side within a few years of use.

Internally, decide the split between hanging rails, drawers, shelves and pull-out accessories per bay, and confirm which items are supplied by the factory and which you source locally. Drawer runners and tall rail hardware are usually quoted separately from the carcass.

5. Approvals, packing and delivery sequence

Before production releases, get a signed shop drawing showing door elevations with tone assignments labelled on every door, plus a written list of hardware models. Photographs of the approved samples should be attached to the order record so both sides are checking against the same reference.

For overseas projects, packing and sequencing matter as much as the product. Ask how doors are protected at the corners — acrylic faces chip at edges in transit more often than they scratch on the flat — how panels are numbered against room marks, and whether the wardrobe arrives in the same container as the rest of the joinery or separately. Door-to-door delivery with shipment tracking means the cabinetry can be scheduled to land after the floors and painting are complete, rather than sitting on site in plastic.

Finally agree who installs and what happens if a panel arrives damaged. Confirm whether installation is done by your local contractor following factory assembly drawings or by a supervised team, how replacement panels are re-manufactured and shipped, and which parts of the order are covered as spares. Getting these five confirmations in writing before production is far cheaper than resolving them after a container has sailed.

SANTERSON manufactures made-to-measure acrylic wardrobes with project-specific dimensions, layouts and finish options. Send us your floor plan and reference images and our team will return door elevations, hardware schedules and a quotation for review before anything goes into production.