Open shelving in a guest bathroom or service area looks like a small line item on the bill of quantities. It becomes a visible problem when the unit arrives too deep for the recess, clashes with the vanity finish, or cannot carry the weight of guest amenities and linen. This guide explains how to specify Santerson Freestanding Open Shelves for a hotel fit-out: what to decide before you order, which details to confirm in writing, and how the units coordinate with the rest of the bathroom package.
Why freestanding open shelves appear in hotel programmes
Freestanding open shelves are unenclosed, floor-standing storage units. In guest rooms and serviced apartments they hold towels, toiletries and decorative pieces within arm's reach; in back-of-house areas they support housekeeping staging and amenity restocking. Three practical reasons keep them on hospitality schedules:
- No door hardware or hinges to specify, replace or adjust during the operating years.
- Easier visual checks — housekeeping can see stock at a glance.
- Simpler servicing: an open carcass can be moved, re-dressed or swapped without disturbing adjacent wall finishes.
The trade-off is exposure. Everything stored is on show and collects dust, so the specification has to cover what guests will see, how the surface is cleaned, and where the unit sits relative to water splash zones.
Start from the room type, not the product page
The same collection serves very different duties. Decide the duty first, then size and finish follow:
| Location | Typical duty | What to pin down before ordering |
|---|---|---|
| Guest bathroom | Towels, guest amenities, baskets | Distance from shower and basin splash zones; shelf depth that keeps linen dry; finish coordination with bathroom sanitary fixtures |
| Guest room / suite | Luggage-height storage, display styling | Clear floor space and door swing; whether the unit blocks a wardrobe or vanity door when in use |
| Housekeeping floor / pantry | Restocking, amenity staging | Shelf pitch for standard amenity trays; wipe-clean surface; loading for stacked linen |
| Public or lounge area | Display, literature, plants | Stability and fixing method on hard flooring; edge details in high-traffic lines of sight |
Where a corner is the only free wall, Santerson Corner Open Shelving is the closer fit; where a framed look is required to match other joinery, Santerson Metal Frame Shelves sits in the same Open Shelving collection with a different construction.
The four decisions that carry the specification
These units are made to measure rather than offered as one fixed catalogue size. Four decisions shape both price and site outcome:
- Dimensions. Overall height, width and depth, plus the clear opening at any skirting or pipework the unit must sit against. Confirm the finished floor level, not the structural slab.
- Layout. Number of shelves, their spacing, and which bays are open for tall items. Fixed versus adjustable shelf positions changes what housekeeping can store later.
- Material and finish. The collection offers material and finish options, so specify the surface against the cleaning regime the housekeeping team will actually use — not only against the sample board.
- Intended loading. State what each shelf carries: folded linen, glass amenity bottles, or light styling items. Loading drives shelf thickness, span and support detailing.
For glazing within the same bathroom package, Santerson Glass Shelves needs the same discipline: glass specification, load limits and installation requirements are confirmed per configuration.
Confirm these points in writing before production
The product pages ask buyers to confirm dimensions, material, loading and installation requirements for each selected configuration. Turn that into a short pre-production checklist on your purchase order:
- Room-by-room schedule with unit codes, sizes and shelf layout drawings.
- Confirmed finished floor and finished wall levels, including tolerance bands.
- Declared load per shelf and the items assumed to sit on it.
- Fixing method, and whether the unit stands free or is restrained to the wall — worth settling before handover.
- Finish sample reference and the approved cleaning products.
- Delivery sequence by room number, so units reach floors after wet trades are complete.
Order them inside the bathroom package, not as an extra
The most common avoidable cost is a shelving order that arrives after basins, vanities and shower sets are already on site, forcing one-off freight and a second site visit. Because custom furniture design and prototyping covers made-to-measure pieces in the same programme as ceramics, lighting and joinery, shelving can be drawn, quoted and produced with the rest of the fit-out. Interior design services cover space planning and product specification, so shelf positions are resolved at drawing stage rather than on site.
For multi-property programmes this also means one finish library across guest bathrooms, pantries and public areas — a smaller spares list and a consistent look from floor to floor. Where installation support forms part of the contract, furniture installation for interior projects covers on-site fitting and inspection, which is when shelf levels, wall restraints and any snagging are signed off.
A simple selection sequence
- Walk the room with a tape: record recess depth, door swings and splash distances.
- Assign a duty to every unit — guest-facing display or back-of-house storage.
- Choose the collection variant that matches the construction you want: freestanding, corner, metal frame or glass.
- Issue a room schedule with dimensions, shelf layout and declared loading.
- Approve the finish sample against the housekeeping cleaning regime.
- Release shelving with the wider bathroom and joinery order, scheduled by room number.
Follow that sequence and the open shelves stop being a late substitution. They arrive as part of the fit-out, sized to the space they were measured for, and specified for the load the operations team will actually put on them.