A bathroom drawing looks finished on screen: the suite is drawn in elevation, the finish schedule says “close to sample”, and the model note reads “one-piece WC”. Then the enquiry goes out and three suppliers come back with three different toilets. None of them are wrong; the brief simply never said what had to be true before the fixture could be installed. This article walks through how we convert that kind of brief into a confirmed quotation for the washdown one piece toilet, model 1003A, using our own bathroom sanitary range as the worked example.

Step 1: Turn “one-piece WC” into a line item that can be quoted

Project briefs usually name a category, not a specification. For a one-piece close-coupled suite on a washdown flush, the minimum set of variables we ask a specifier to fix is short: trap type and rough-in distance, flushing system, ceramic body and glaze, seat and cover specification, and the quantity split by floor or room type. Each of those changes price, tooling and packing, so leaving any of them open means the first quotation you receive is only an indication.

On our side we respond with a datasheet that carries the model number, the overall dimensions, the flushing description and the installation options, so the consultant can mark it up against their own drawing rather than compare three brochures. Model numbers travel well across a project; marketing adjectives do not.

Step 2: Settle the drainage layout before anything else

Drainage is the decision that cannot be corrected after tiling. The 1003A is offered in two installation types: a P-trap wall drain with an 180 mm rough-in, and an S-trap floor drain with a 250 mm rough-in. Those two dimensions decide whether the suite sits off the same soil stack as the existing layout or needs the waste moved.

In practice we ask for three items before quoting: the waste outlet position from the finished wall or finished floor, the floor build-up on the bathroom slab, and whether the project is new build or a renovation working around existing stacks. On a villa with several bathrooms this often produces two variants of the same suite rather than one, and it is far cheaper to split the order now than to swap trap types on site.

Where a project needs a different arrangement — a wall-hung WC instead of a floor-standing one, or a two-piece suite for a high-traffic guest floor — we quote the closest matching model from the same range. The wall hung toilet 1038W and the two piece washdown toilet 1038A sit in that same bathroom sanitary group, which keeps the ceramic tone and seat styling consistent across floors.

Step 3: Match the bowl and glaze to how the room will actually be used

A hotel guest bathroom and a private villa bathroom wear differently. Guest bathrooms are cleaned on a fixed rota with stronger agents and higher frequency; villa bathrooms are cleaned less often but see more varied use. That drives what we confirm on the body itself.

The 1003A is made from vitreous ceramic with a glossy glaze, which is the surface type we specify where staining and yellowing are the main complaints, because a dense glazed surface wipes back to its original colour rather than holding the mark. The one-piece moulding also removes the crevice between pan and cistern that collects dust and cleaning residue on a two-piece suite, so housekeeping does not need a separate tool to reach it. For the same reason we recommend specifying the seat and cover at the same time as the ceramic rather than sourcing locally later; mismatched hinges and seat dimensions are one of the most common snags at handover.

If your specification calls for a matching basin in the same series, the freestanding pedestal basin 1003S is drawn to the same contemporary styling and ceramic finish, which is how we keep a bathroom looking like one design rather than three purchases.

Step 4: Write the flushing requirement into the brief, not the submittal

Flush performance is where vague language causes real rework. “Water efficient” means nothing on its own; what a specifier needs is the flushing method and how it behaves in the stack arrangement you are building. The 1003A uses a washdown flush, which relies on a direct drop into the bowl rather than a rim siphon — a preference in many projects because it runs quietly and clears reliably at lower water volumes.

What we ask clients to send here is short: the cistern or concealed frame they intend to use, and the water pressure available at the fixture. Where the building uses a pressure-reducing setup, that detail changes which valve and fill arrangement we ship with the suite.

Step 5: Group the enquiry across the whole bathroom package

A single toilet line item is an inefficient enquiry. Because we supply both furniture and building materials, most clients get a better result by sending the bathroom as one package: WC suites, basins, shower systems, vanity units, mirror cabinets and the lighting around the vanity. One specification sheet then covers every fixture in the room, the ceramic tone is matched once, and delivery arrives on the same container instead of on three separate shipments with three separate customs files.

This is also where our one-stop project furnishing service earns its keep on multi-unit work. When the bathroom, bedroom and joinery packages come from one factory, we can align production so that the wet areas are not sitting idle while cabinetry is still in the paint line.

Step 6: Confirm the finish, then confirm how it reaches site

Before production we send a specification sheet for sign-off: model number, dimensions, trap option, glaze reference, seat and cover detail, and packing method. For projects placing ceramic across many units, we also flag whether the order will be produced in one batch, because glaze tone and hardware finish should come from the same run when suites are installed side by side in a corridor.

On the delivery side our logistics and door-to-door delivery service covers freight arrangements, packaging and container loading, customs paperwork and shipment tracking through to site. Ceramic needs specific crating rather than standard furniture packing, so we confirm the packing method with the specification sheet rather than leaving it to the forwarder. Installation and after-sales support follow on the same project file, which keeps responsibility in one place if a suite arrives damaged or a spare seat is needed two years into operation.

What to send us for a fast, accurate quotation

If you are at the enquiry stage on a modern ceramic one piece toilet for a bathroom project, the following is enough for us to come back with a firm, buildable quotation rather than an estimate:

  • Quantity by room type, and whether the same model repeats across floors.
  • Trap type and rough-in — 180 mm wall outlet or 250 mm floor outlet for this model — plus the waste setting from the finished surface.
  • The cistern, frame or flush plate you intend to use, and available water pressure at the fixture.
  • Seat and cover preference, including soft-close requirement and any project-specific branding.
  • Destination port or site address, and your preferred Incoterms.

Send those five items and we can confirm the 1003A against your drawing, flag any room where a different trap option is needed, and price the bathroom as one coordinated package instead of a list of separate purchases.

SANTERSON — China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects. Enquiries: PHILLIP, +86-13928214007 (WhatsApp), santerson@qq.com, or via our contact page.