Guest-room wardrobes are one of the last items a hotel fit-out team signs off and one of the first things a guest judges. A glass & lacquer combination wardrobe sits in the middle of that tension: it has to look considered under lobby-level lighting, survive daily housekeeping, hold a full guest wardrobe in a shallow box, and match the joinery running through the rest of the room. This guide walks through the decisions a procurement or fit-out team should settle before placing a made-to-measure order, using our Lacquer Wardrobes collection as the reference point.

Why combine two finishes in one wardrobe run

A single wardrobe face is usually asked to do two contradictory jobs. Guests want to see where their shirts are and want the room to feel larger; operators want luggage, spare linen and a safe hidden away. A combination layout resolves that by splitting the elevation instead of compromising it: lacquered panels close off storage that has no business being on display, while glazed sections carry the light and give the room depth.

The practical benefit for a project team is consistency. When the same lacquer specification appears on the wardrobe, the minibar unit and the headboard wall, one finish approval covers three items. The glazing then becomes an accent rather than a separate design decision. Where the room scheme leans darker or more formal, our matte lacquer wardrobes pair well with smoked or bronze-tinted glass; where the scheme is bright and compact, glossier surfaces with clear glass do more for perceived space.

Settle the door type and glazing before you set the finish

Finish is the easy conversation. Clearance and opening mechanism are the ones that cause site problems later, because they decide whether the design can be built at all.

  • Hinged doors need a swing arc. In a guest room with a desk or a bed frame close to the wardrobe wall, that arc is easy to miss on the drawing and impossible to miss on opening day.
  • Sliding doors give back the swing space, which is why they suit corridor-fronted rooms and shorter wardrobes. Our glass sliding door wardrobes are specified with the track allowance built into the carcass height, so the headrail is not a site adjustment.
  • Framed glass fronts, as in our aluminium frame glass wardrobes, give the glazed panel a defined edge that sits cleanly against a lacquered neighbour and shields the glass edge from trolley knocks.
  • Frameless glass fronts, such as our clear glass wardrobes, read lighter and suit rooms where the joinery is already busy.

With the mechanism settled, choose the glazing itself. Clear glass shows everything behind it, which is fine in a show apartment and difficult in a hotel room where housekeeping cannot restock a section every service. Tinted and textured options — the bronze and smoked finishes used across our bronze glass wardrobes and smoked glass wardrobes, or the texture of our ribbed glass wardrobes — keep the lightness of glass while obscuring what is stored behind it, and are easier to keep presentable between services than clear panels.

Our Glass & Lacquer Combination Wardrobes are made to measure, so door type, panel split and dimensions are fixed at the drawing stage rather than chosen from a size grid. That flexibility only pays off if the drawings you send are the drawings the room will actually get.

Test the glazing at sample stage, with a full guest load-in behind it: suitcase upright, hangers at both heights, laundry bag in place. If the glazed section still reads tidy under those conditions, that tint is right for your rooms. Ask us for the glazed section as a sample panel alongside your lacquer sample, so you can judge both against your own floor finish and guest-room lighting before the order is released.

Set the interior layout by room type

The interior is where a wardrobe either supports housekeeping or quietly adds work to every service. A guest who has never seen the unit before should be able to find the rail, the shelf and the drawer on the first opening, without rearranging anything. Rather than running one interior across every floor, group your room types and set one elevation per group:

  • Standard rooms: one short-hang rail over a shelf, one shallow drawer for guest small items, and a luggage bay kept clear of hanging rails.
  • Suites and serviced apartments: full-height hang, a deeper drawer bank, and one section left open for the ironing board or safe.
  • Long-stay units: more drawer volume and fewer shelves, since guests unpack once and want everything within reach.

Because sizing is project-specific, alcoves, sloped ceilings and awkward columns are drawn around rather than filled with a filler panel. Where a floor-to-ceiling run needs to continue into the living area, the same approach carries across into our boutique style walk in wardrobes for suites and our wider built-in furniture range.

What to send with your enquiry

A combination wardrobe order moves fastest when the following arrive together, before pricing rather than during production:

  • Room-by-room elevations with overall width, height and depth, plus the finished floor level.
  • The door type per room type, with clearance dimensions marked.
  • Lacquer colour or sheen reference, and the glass tint for each glazed section.
  • Interior layout per room type, including where the safe, luggage and linen sit.
  • Delivery sequence by floor or room number, so installation is not stacked in one corridor.

We work as a furniture and building materials manufacturer covering wardrobes alongside the cabinetry, wall panelling, doors and sanitary fixtures that sit around them, so a single specification can cover several trades on one floor. Our turnkey solutions cover design coordination, production, logistics and site support for villa, hospitality and office projects, which means the wardrobe drawings and the joinery drawings are checked against each other rather than issued separately.

Test the specification on a mock-up before releasing the full order

The last step is the cheapest protection in the programme. Build one complete room set — wardrobe, glazed section, lacquered panels, interior fittings — and use it as a guest would. Check the door clearance against the bed and desk, check that the glazed section still looks orderly with a full guest load, and check both the lacquer and the glass tint against your own floor finish and lighting rather than the sample board. Corrections at mock-up stage cost an afternoon; the same corrections after production start cost a room turn.

Send us your elevations and finish references and we will return made-to-measure drawings for review before anything enters production. Start the wardrobe package for your guest-room floors through SANTERSON.