An island walk-in wardrobe changes how a bedroom suite works: dressing happens in the middle of the room instead of along one wall, and the island itself carries the folded storage, the hardware and often the display surface. Because it is made to measure, the drawings have to be settled long before production starts. Below is the checklist we work through with architects, builders and villa owners before a custom island walk-in wardrobe goes into manufacturing.

1. The room envelope, not just the wardrobe footprint

Island units need clear circulation on all sides, so the aisle between the island and the surrounding run of wardrobes decides whether the space is comfortable or cramped. Confirm finished floor levels, skirting details, ceiling height, and the position of doors, windows, radiators and light switches — these are the elements that shift on site and change what the drawings can assume. Record the room as built, after plaster and flooring, rather than relying on architectural plans alone.

Also confirm what sits above and below the island: recessed lighting and any ceiling services overhead, plus underfloor heating loops or floor outlets beneath the base. An island is rarely moved once it is placed, so it should not sit over a floor access point or an air diffuser.

2. Island dimensions and how the top will be used

The island is a work surface before it is storage, so its height, depth and drawer layout follow from how it will be used: watch boxes and jewellery trays need shallow drawers with dividers, folded knitwear suits medium-depth drawers, while deep drawers are better kept at the ends where they do not block legroom. Confirm the top material and edge profile at the same time — stone, glass and timber tops read differently against the drawer fronts, and the choice sets the tone of the whole room.

Confirm what the island carries inside: drawer dividers, tray inserts and any felt-lined or mirror-topped section change internal dimensions and should be listed on the order rather than added verbally once production has started.

Where the island is a feature rather than pure storage, an open walk-in wardrobe scheme — open shelving and display niches instead of closed doors — can be combined with the island, provided the shelving spans, back panels and lighting are drawn in the same set of details.

3. The surrounding layout: perimeter, corner and walk-in runs

The island only works when the perimeter run is planned around it. Decide which walls carry hanging, which carry shelving, and how returns are handled at the corners, then check that drawer fronts and doors can open fully without hitting the island. Rooms with two facing runs usually suit an U shaped walk-in wardrobe layout; a single return wall plus an island is often the better answer in a narrower bedroom.

Confirm hanging heights per zone — long hanging for coats and dresses, double hanging for shirts, and open shelving above — because these dimensions are fixed once the carcasses are cut.

4. Materials, finishes and hardware

State on the drawing what each surface actually is: board type, panel construction, edge treatment, and the finish — veneer, lacquer, acrylic or melamine — plus a physical sample reference for colour and grain direction. Interior surfaces are specified separately from door fronts, and matching them after production starts is difficult.

Hardware is where quality is felt daily, so confirm drawer runners, hinges, soft-close type, handle or handleless detail, and the load rating for deep drawers. Ask for the brand and model to be listed on the quotation rather than described as "premium fittings", and note which items are supplied with the units and which are sourced locally.

If the wardrobe fronts continue onto bedroom walls or a media wall, confirm that the same panel detail, grain direction and shadow gap run across all of them, so the joinery reads as one package rather than several separate items.

5. Lighting and electrics

Internal lighting needs a decision before the carcasses are drilled: profile or puck lights, sensor or door switch, driver location, and where the cable exits. Drivers have to sit somewhere accessible for maintenance. If the island top is glazed or lit, that detail belongs on the same drawing as the power feed.

6. Tolerances, delivery sequence and installation

Confirm who takes final site responsibility for level and square, how scribes and filler panels will be used at uneven walls, and whether the island base is adjustable. Then fix the delivery sequence: a walk-in wardrobe installed after flooring and decoration but before soft furnishing avoids both damage and rework. For projects ordering several joinery packages together — wardrobes, vanities and custom built-in kitchen cabinets — aligning the finish references and site dates in one package keeps colour consistent across the floor.

SANTERSON works on made-to-measure joinery for villas, apartments and hospitality projects, with design coordination, production, freight and installation support handled as one scope. Send us the room dimensions, drawings or photographs, and we will confirm the layout, materials and quotation before anything is produced.