Painted shaker fronts are the safe choice when a hotel, apartment block or office fit-out needs cabinetry that reads clean today and still looks current in five years. The trouble is that two quotations can carry the same words — "painted shaker", "custom size", "MDF door" — and produce cabinets that behave very differently once heavy daily use starts in a public building. Comparing suppliers properly means comparing what sits behind the door profile: how the cabinet is engineered, how the paint system is specified, who signs off the drawings, and what happens when a shipment arrives with panels missing.
Below is the checklist we suggest using when you evaluate painted shaker cabinets suppliers for a commercial project, whether you are buying kitchen joinery for serviced apartments or casework for a reception scullery.
1. Confirm the supplier actually manufactures to your dimensions
Many trading companies list shaker styles they have never produced. Ask for a made-to-measure quotation drawn from your own layout rather than a catalogue price sheet. A real manufacturer will quote carcass heights, toe-kick depth and reveal widths that match your drawings, and will question dimensions that conflict with appliance clearances.
On our side, the custom built-in kitchen cabinets we supply for hotel and apartment projects are specified by layout, door style, panel material and surface finish per project, with matching hinges, drawer slides, support legs and connecting brackets included in the package. That single point of supply matters on site: mismatched hardware sourced locally is one of the most common causes of installation delay.
2. Ask how the paint system is described, not just what it is called
"Painted" covers anything from a single primer coat to a multi-stage lacquer system. In a commercial setting — guest kitchenettes, staff pantries, co-working sculleries — doors get wiped with detergents far more often than in a private home. Ask the supplier to state, in writing, the substrate of the door core, the number of primer and top coats, and whether edges are sealed or wrapped. A shaker rail with an unsealed MDF edge will show the first wear at the corner, and it shows early in high-traffic buildings.
Where a project needs a specific sheen or colour match to a design board, ask for a physical sample door before the order is placed. Sample approval is the cheapest quality control step available on a cabinetry contract, and it puts the finish expectation on paper before production starts.
3. Check consistency across a large order
Colour drift between batches is the complaint that appears most often on multi-unit projects. If you are fitting out thirty apartments, doors produced in two separate runs must match. Ask how the supplier controls batch colour, whether all painted components for one building are sprayed in a single run, and what they do when a replacement panel is needed after handover.
Our grey shaker cabinets and the wider Shaker Kitchen Cabinets collection are configurable lines, so the same door profile can be carried across every unit in a building — including two-tone layouts where upper and lower runs differ. Keeping one door family across the whole job reduces both the colour risk and the number of trades on site.
4. Test the quotation for what it leaves out
A comparable quotation should itemise:
- carcass construction and panel thickness, not just "custom cabinet"
- door and drawer front specification, including edge treatment
- hardware brand, load rating and soft-close scope
- packaging method and container loading plan
- who prepares the shop drawings and who signs them off
- what is covered if a panel arrives damaged, and how replacements ship
If two suppliers are 20% apart on price, the difference is almost always in one of these six lines. Normalise the quotation before you compare it.
5. Look at the delivery and after-sales structure
Cabinetry is where poor logistics becomes visible: a chipped painted panel cannot be sanded out on site the way a laminate can. Ask whether freight forwarding, customs documentation and door-to-door delivery are handled by the same team that made the cabinets, and whether one coordinator stays with the shipment from production to arrival. For projects abroad this is the difference between a single accountable contact and three parties pointing at each other.
We handle design coordination, production, logistics and on-site installation guidance as one scope, so drawings, manufacturing and shipment stay with the same team from approval through to snag inspection. Spares and replacement panels are handled inside that same after-sales process rather than raised as a new order.
6. Verify the supplier with comparable work
Ask for project references in the same category as yours: not "we supply hotels", but which building, how many units, and whether that buyer reordered. A supplier working on repeat apartment and villa projects will answer this quickly; a broker will hesitate.
A practical shortlist
Run three suppliers through the same test: send your layout, request made-to-measure quotations against the six-point list above, and ask each for one physical painted sample door. Compare the answers on construction, finish specification, batch control and after-sales scope — not on headline price per linear metre. Painted shaker cabinetry is a ten-year asset in a commercial building, and the supplier who documents those details up front is usually the cheapest one by the time the project is handed over.
Send us your drawings and unit count and we will quote painted shaker cabinetry against your specification, with hardware, packaging and delivery handled in the same package.