A quote for wall paneling rarely arrives in a form that lets you compare two suppliers side by side. One lists a price per square metre with no drawing attached, another prices the whole wall but leaves out the track and trims, and a third quotes a sample size that does not match your room. Before you sign anything for Santerson Acoustic Panels, here is what should be written down on paper — and what an incomplete line item usually turns into later, on site.
Start with the scope, not the price
Acoustic wall panels are a system, not a loose tile. The visible face is only part of what gets installed; the fixing method, the perimeter detail and how the panels meet doors, skirting and services all affect both the sound performance and the finished look. A quote that prices "acoustic panels, X m²" without stating where they go and how they are fixed is not comparable with a quote that does.
Ask for a room-by-room schedule: each wall or area, its dimensions, the panel layout proposed, and any transition details. Where the wall also carries a door or a sliding screen — for example in a bedroom or media room — confirm whether those elements are priced in the same quotation or quoted separately. Our Santerson Acoustic Sliding Panels and fixed panel lines are configured differently, so a single blended figure for both is a warning sign.
Confirm the panels are made to your dimensions
Santerson wall paneling systems are specified per project, with finish, layout and dimensions set for each space. That means a quote should reflect your measured openings, not a standard module that you then have to cut on site. Check three things:
- The measurement basis — who measured, when, and whether the figures are finished-floor levels and completed wall faces rather than structural shell dimensions.
- Panel module sizes and total coverage per area, so you can see how cuts fall around corners, sockets and reveals.
- Whether offcuts, spares and any field-adjustment allowance are included, or priced as variations.
If the numbers on the quote do not add up to the areas in your drawings, ask for the calculation. Reconciling this before production is free; reconciling it after delivery is not.
Read the material and finish description carefully
The same panel layout can be quoted with several core, face and finish options, and price differences usually sit here rather than in the geometry. For each area, the quote should name the substrate or core, the surface material, the finish, and the colour or grain reference. Within our wall paneling range, textured panels, lacquered finishes, stone-effect surfaces and glass-fronted options each behave differently in a hallway or media room, so the specification should say which one you are buying.
Two practical checks follow from this. First, ask for a physical sample of the exact finish quoted, with the reference marked on it — a screen image is not a finish approval. Second, ask what happens to that approved sample: whether it is kept as the production benchmark and how colour tolerance is defined between batches.
Acoustic performance: ask what is being claimed
"Acoustic panel" covers anything from a decorative surface that reduces echo to a build with a specified absorption or sound-insulation rating. Do not assume the two are the same, and do not accept a bare adjective in place of data. For each quoted configuration, ask:
- What performance figure is claimed, measured against which method, and whether it applies to the panel alone or to the assembled wall build including cavity and fixings.
- Whether the target for your room — a home cinema, a bedroom adjoining a living area, a boardroom — has been stated in writing, so both sides are working to the same expectation.
- What is excluded: doors, glazing reveals, service penetrations and skirting returns usually govern the result as much as the panel face.
Where your project has a genuine performance requirement rather than a preference, say so in the enquiry and ask for the build-up that supports it. We confirm acoustic performance for the selected configuration on request instead of quoting a single figure across a whole range.
The line items that get left out
Most disputes over an acoustic panel quote are about something that was never priced. Run this list against your document:
| Item | Why it matters |
| Substructure, tracks and fixings | A panel price that excludes the supporting framework understates the wall by a wide margin. |
| Trims, reveals and corner profiles | Perimeter and meeting details are where the finish is judged; they are also the most common omission. |
| Cut-outs for sockets, switches and vents | Priced per item or not at all — clarify before production. |
| Packaging and crating | Panels arrive damaged far more often than they are manufactured wrongly; specify the packing standard. |
| Freight, duties and delivery point | A delivered price must state which address, who clears customs and who carries risk in transit. |
| Site guidance or installation | Whether fixing is your contractor's scope or the supplier's — and what support is provided either way. |
| Spares | One or two replacement panels ordered a year later are rarely available at the original unit price. |
Payment, lead time and what starts production
For made-to-measure paneling, the trigger for manufacturing is drawing approval, not payment alone. The quote should state which documents have to be signed before the order enters production, and what happens if dimensions change afterwards — because on a live site they usually do. Look for a deposit and balance schedule tied to clear milestones, a stated production period, and a statement of what voids or reprices an order.
Ask specifically how dimensional changes are handled after approval: whether re-made panels are charged at the quoted unit rate, and what the revised lead time becomes. Suppliers who price this transparently tend to be the ones who absorb fewer problems on site.
Delivery and after-sales terms in writing
Paneling usually arrives alongside flooring, doors and joinery from other suppliers, so the delivery window matters commercially as well as practically. Confirm the packing specification, the container or pallet arrangement, and how shortages or transit damage are reported and settled. Our logistics service covers freight forwarding by sea, air and rail with customs paperwork and door-to-door delivery; the exact Incoterms, transit period and delivery scope for your address are confirmed case by case rather than assumed.
On the after-sales side, ask what is covered, for how long, and what evidence you need to keep — approved samples, signed drawings and batch references are what make a later claim straightforward. Warranty terms and response arrangements vary by project and region, so treat them as items to confirm in writing, not as standard assumptions.
Putting it together
A well-built quote for acoustic wall paneling reads like a method statement: scope by room, measured dimensions, named materials and finishes with approved samples, a stated performance basis, the full set of substructure and trim items, and clear commercial terms for changes, delivery and after-sales. Two suppliers quoting the same wall should then look broadly similar, and any real difference becomes something you can discuss rather than discover later.
If you are specifying paneling for a villa or apartment project, send us the drawings and the acoustic expectation for each room. We will quote against Santerson Acoustic Panels with the configuration, dimensions and finish options itemised, so your comparison is a genuine one.
Can I compare a per-square-metre price with an all-inclusive wall price?
Only after both quotes are broken down to the same elements — panels, substructure, trims, cut-outs, packaging and delivery. Normalise them before comparing; otherwise you are comparing descriptions, not costs.
Should I order acoustic sliding panels and fixed panels in one quotation?
They can sit in one document, but the hardware, track system and clearances for acoustic sliding panels should be priced and described separately from fixed wall paneling, since the build-ups differ.
What is the minimum information needed for an accurate quote?
Room dimensions taken from finished surfaces, a layout or elevation showing where panels start and stop, the intended finish, and any performance target. Missing any of these produces a figure that will move.