Noise travels through walls far more easily than most buyers expect, and by the time a villa or apartment handover is complete, correcting it usually means pulling finishes off again. Santerson Acoustic Panels are configurable wall panels supplied as part of our paneling systems range, made to the dimensions of each space rather than to a fixed module. The following is how we suggest you evaluate them before you place an order, written from the point of view of a project buyer or contractor who has to live with the result.
What the product actually is
Santerson Acoustic Panels sit in the Wall / Paneling Systems category, alongside our textured, matte lacquer, stone and marble, and glass and glossy panel options. The listing describes them as configurable acoustic wall panels for residential wall system projects, with finish, layout and dimensions specified per space, and made-to-measure sizing with material and finish choices available at the configuration stage.
That description matters because it sets the boundary of what you can rely on from the catalogue page alone. The public listing does not publish a fixed core build-up, a panel thickness, or a laboratory sound reduction figure for these panels. Anyone quoting you a specific performance number for this line should be able to show which configuration it applies to and where it was measured. Until that is in writing against your drawing, treat the number as provisional.
Start with the noise problem, not the panel
Two rooms can look identical on a plan and need completely different wall build-ups. Before you ask for a price, write down three things:
- Where the noise comes from. A bedroom adjoining a corridor, a home office next to a media room, and a villa living area opening onto a stairwell are three different problems.
- What kind of noise it is. Speech and television sound behave differently from footfall, doors slamming, or bass from an entertainment system. Surface finishes help with the first; mass and decoupling matter for the others.
- What else in the wall you are allowed to disturb. Existing wiring, skirting, architraves, built-in joinery and ceiling junctions all constrain how a panel system can be fixed and where the weak points remain.
A supplier who asks these questions is specifying. A supplier who sends a price list is selling stock. Because our acoustic panels are made to measure, we work from your drawing and this information rather than offering a standard size off the shelf.
Fixed or sliding: choose the operating principle first
If the wall also has to open, close or reconfigure a space, look at Santerson Acoustic Sliding Panels as well. They are listed under Wall / Sliding Panel Systems and carry the same made-to-measure approach, with finish, layout and dimensions set per space.
The honest trade-off is this: a fixed panel run has fewer moving parts and fewer gaps, while a sliding system gives you flexibility but introduces tracks, edges and overlaps that all need to be detailed properly. Our sliding panel listing explicitly asks buyers to confirm project requirements and the acoustic performance of the selected configuration, which is exactly the right thing to do before signing off a track layout.
| Decision point | Fixed acoustic panels | Acoustic sliding panels |
|---|---|---|
| Wall stays a single plane | Yes, continuous run | Only when panels are closed |
| Space can be reconfigured later | No | Yes |
| Detailing needed at edges and junctions | Perimeter only | Perimeter plus track, hangers and panel overlaps |
| Performance confirmation | Confirm build-up for your configuration | Confirm performance for the closed configuration specifically |
What to confirm with the factory before you order
These are the items we ask buyers to close out in writing, and they apply whether you source acoustic panels from us or anywhere else:
- Dimension basis. Confirm whether your measurement is a clear opening or a finished face dimension, and who takes the site check. Made-to-measure only works if the measurement source is agreed.
- Finish and material selection. Ask for physical samples of the exact finish, not a printed brochure page, and keep the approved sample with the delivery paperwork.
- Fixing method and substrate. The wall behind the panel has to be flat, structurally sound and suitable for the specified fixings. This is normally the point where an installation goes wrong, not the panel itself.
- Edge and junction details. Skirting, ceiling line, internal corners and any door reveal should appear on the shop drawing before production starts.
- Acoustic performance for your configuration. If a rating matters for your project, request it for the build-up you are actually buying, with the test basis stated.
- Lead time and packaging. Confirm the production sequence for phased rooms, and how panels are packed and protected for international freight and site handling.
Why buyers specify these through a one-stop supplier
A wall system rarely sits alone. In a villa or apartment fit-out the same wall carries lighting, doors, joinery and flooring transitions, and every interface is a potential acoustic weak point. That is the practical argument for ordering finishes together rather than sourcing each item separately: one party coordinates the drawings, one production schedule covers the package, and interfaces are resolved once instead of argued about on site.
As a one-stop furniture and building materials supplier, we handle paneling alongside related items from our range, including decorative interior doors, wall-mounted storage walls, timber flooring, lighting and custom cabinetry, all under one project workflow that covers design coordination, production, logistics and installation support. If the acoustic wall has to integrate with concealed doors or built-in joinery, coordinate those on the same drawing rather than sequentially.
How the order actually moves
For an ongoing fit-out, it is usually worth ordering one room first and inspecting the installed result before releasing the remaining phases. This costs very little and removes almost all of the risk on a made-to-measure product.
A worked example of a sensible enquiry
Instead of asking "how much per square metre for acoustic panels", send something like this:
- Room: second-bedroom wall shared with the media room, approximately 4.2 m long by 2.7 m high.
- Problem: television and speech audible in the bedroom after 10 pm; no footfall issue.
- Constraint: skirting and architrave to be retained; one wall light to remain accessible.
- Finish direction: matte, warm neutral tone to match existing joinery; samples requested.
- Question: which build-up addresses speech transmission in this situation, and what does it add to the finished wall thickness?
An enquiry written this way gets a real specification back. It also makes it obvious if a supplier is not actually specifying anything.
Common buying mistakes worth avoiding
- Buying on a catalogue image. Panels that look identical can have very different build-ups. Confirm the construction, not the photograph.
- Treating one wall in isolation. Sound flanks. If you treat a wall but leave the ceiling junction and the door unaddressed, the improvement will disappoint.
- Skipping the sample stage. Finish appearance under site lighting is different from a showroom or a screen.
- Releasing all phases at once. With made-to-measure product, one approved installed room is worth more than any number of emails.
Next step
If you are specifying wall systems for a villa, apartment or hospitality project, send us the drawing and your noise brief and we will come back with a configuration, finish options and a shop drawing. You can review the product page for Santerson Acoustic Panels or start an enquiry through our contact page.