A wall panel quote that looks cheap often ends up costing more on site. Before you sign a purchase order, compare what is actually written in the quotation line by line: material and finish, panel dimensions, fixing method, accessory list, packaging, delivery terms and after-sales scope. This checklist is written for buyers specifying decorative 3D wall panels for villa, hotel, office and apartment projects.
1. Confirm the Panel Type You Are Actually Quoting
The phrase "3D wall panel" covers very different products. A decorative relief panel for an interior feature wall is not the same as a cladding panel designed for a facade or a curtain wall. Ask the supplier to state, in writing, which product line your price refers to, and check it against their own catalogue page.
For interior accent walls, our Luxury Decorative 3D Wall Panel is a lightweight panel with a three-dimensional surface effect, supplied in custom size, colour and pattern for living rooms, TV background walls, hotel lobbies, restaurants, offices and villas. Where the design calls for a flat textured finish instead of relief, compare it with our Modern Decorative Wall Panel, which simulates stone, wood and fabric surfaces. For exterior facades, partition walls and commercial cladding, we supply Aluminium Honeycomb Panel with an aluminium honeycomb core, in solid coating, perforated or natural stone veneer faces. A correct quote names the product; a vague quote says only "wall panel, as per picture".
2. Check Dimensions, Thickness and Coverage Calculation
Panel size drives everything else: how many pieces you buy, how the pattern lines up, and how much cutting waste you carry. Ask for the nominal panel size and the effective coverage per piece, not just "per square metre". Then confirm three numbers in your own take-off:
- Net wall area to be covered, measured from the finished drawings.
- Waste allowance for corners, openings, skirting and feature breaks — calculated from your layout drawing, not taken as a standard figure.
- Spare panels for future repair, usually ordered in the same batch so colour and texture match.
If two quotes show the same rate per square metre but different panel sizes, they are not comparable. A larger format needs fewer joints but more cutting on a small wall.
3. Ask What Is Included in the Price and What Is Not
The gap between two quotes is usually in the accessories line. A complete quotation should itemise:
- Panels, with colour, surface finish and pattern reference.
- Trim, edge profiles, corner pieces and any matching connector parts.
- Fixing method — adhesive, mechanical fixing or a batten subframe — and whether those items are supplied or sourced locally.
- Cutting service and pre-machined openings, if the design has sockets, switches or lighting behind the panel.
Where a project needs made-to-measure panels, get the custom dimensions and finish confirmed on an approved drawing before production starts. Our Custom & OEM Service covers bespoke sizes, finishes and textures, with prototyping before batch manufacturing.
4. Verify Material Claims Against Documents, Not Adjectives
Marketing words such as "eco-friendly", "moisture resistant" and "durable" mean nothing until you see the basis for them. Ask which specific test report or declaration supports each claim that matters to your project, and request it as an attachment to the quote. For a bathroom, spa or coastal villa wall, moisture behaviour and the suitability of the adhesive matter more than appearance. For a hotel lobby or corridor, ask about fire performance documentation and what the local authority or certifier requires — do not assume a supplier statement is accepted evidence.
A reliable supplier will also tell you plainly which claims they cannot support for your specific application. That answer is worth more than a brochure.
5. Read the Sample and Mock-up Terms
Never approve a decorative 3D panel from a photograph alone. Relief patterns change completely under site lighting, and colour shifts between batches. A good quotation includes a physical sample, states who pays for freight, and — for larger projects — offers a small mock-up wall so the client can sign off pattern direction, joint detail and lighting before production.
6. Packaging, Container Loading and Damage Liability
Profiled panels break at the corners and mark on the face. Ask for the packing specification: edge protection, interleaving, pallet or carton, and how the panels are braced in the container. Confirm which party is responsible for transit damage, what evidence a claim requires (dated photographs at the point of unloading, marked on the delivery note), and how replacement pieces are produced and shipped. Small replacement orders are where hidden cost appears.
7. Delivery Terms, Lead Time and Batch Consistency
Check the quoted Incoterms and what they include: inland haulage to port, export customs paperwork, ocean or rail freight, insurance, and whether delivery goes to your site door or stops at the port. Our Logistics and Door-to-door Delivery service covers freight forwarding by sea, air and rail, along with commercial invoices, packing lists and certificates of origin.
Then tie the lead time to your programme in writing: production start date, production completion date, and shipment date. If a project needs two phases of panels, order them from one dye lot where colour continuity matters, and state that on the purchase order.
8. Installation Support and After-sales Scope
Ask who fixes the panels. If your local contractor installs them, request a written installation method statement with the recommended substrate preparation, adhesive type and joint detail, so responsibility is clear if something fails. If the supplier installs, confirm what the site work covers, how snags are handled at handover, what the warranty excludes, and how spare parts are supplied later. See our Installation and After-sales Support page for how we handle on-site fitting, inspection and ongoing support.
9. Compare Quotes on the Same Basis
Put every quotation into one table with identical rows: product reference, panel size, effective coverage, accessories, fixing method, sample terms, packaging, Incoterms, lead time, payment terms, warranty and after-sales. The lowest headline rate per square metre is rarely the lowest installed cost once missing trims, extra waste and a second shipment are added back.
Ordering Wall Panels and Other Fit-out Products from One Supplier
Wall finishes rarely sit alone on a project. Feature walls, ceiling panels, flooring, joinery and lighting all touch the same junction details, and split responsibility between suppliers is where snags multiply. As a one-stop furniture and building materials supplier, we produce wall panels and cladding alongside ceiling systems, engineered timber flooring, wardrobes, kitchen cabinetry and bathroom fixtures, so junction details are coordinated in one factory. For villa and hospitality projects, our Turnkey Solutions team handles design coordination, production, shipping and site support through one contract.
A Quick Pre-Order Checklist
- Product reference named on the quote, matched to the catalogue page.
- Panel size, thickness and effective coverage stated per piece.
- Trim, corners and fixing accessories itemised or excluded in writing.
- Approved shop drawing for custom sizes and any pre-cut openings.
- Test reports or declarations attached for every performance claim you rely on.
- Physical sample signed off; mock-up wall agreed for large areas.
- Packing specification and transit damage responsibility defined.
- Incoterms, lead time dates and batch/lot instructions on the purchase order.
- Installation method statement, warranty exclusions and spare parts route confirmed.
Send us your wall elevations and finish schedule, and we will quote panel by panel with those items already answered — including the ones we cannot support for your application.