A freestanding pedestal basin looks simple on a rendering, and that is exactly where procurement mistakes start. Before a Freestanding Pedestal Basin 1003S reaches site on a villa or boutique hotel job, the paperwork around it has to be as considered as the fixture itself. Below is the documentation checklist we apply to this model and to comparable round ceramic stand basins in bathroom projects.
Start with the record that already exists
The published product page for the 1003S describes a tapered round silhouette in vitreous ceramic with a high-gloss glaze, a pre-reserved tap hole for a single faucet, and fixing to the wall through a back panel rather than a free-standing base alone. It also lists an overall size of 490×490×805 mm and positions the piece for villa master bathrooms, boutique hotel washrooms and apartment refurbishment.
Treat that page as a starting reference, not as a submittal document. Before anything is signed off, ask the supplier to restate the dimensions, the tap-hole position and diameter, the waste and trap arrangement, and the wall-fixing detail on a dated technical sheet carrying the model number you are buying. If the sheet and the website differ, the sheet governs, and the difference should be written down rather than quietly resolved on site.
Document the interface with the rest of the bathroom
Freestanding basins fail at the junctions, not in the bowl. The items worth capturing in your specification schedule are:
- Waste and trap: outlet size, trap type, whether the trap is exposed or concealed, and clearance to the finished floor.
- Water supply: hot and cold rough-in heights, offset from the finished wall face, and compatibility with the chosen faucet and its reach.
- Wall build-up: the make-up of the wall behind the back panel, the fixing method into that wall, and whether the wall needs noggins or a reinforcement frame before boarding.
- Floor finish level: the height of the finished floor relative to the basin base, so tiling and waterproofing do not alter the final setting-out.
- Clearance to adjacent fixtures: door swing, shower screen, and access for cleaning behind and around the pedestal.
For each of these, one dimension with a tolerance is worth more than a paragraph of intent. Record them on the same drawing that shows the room layout, so the basin is never coordinated in isolation.
Confirm finish, colour and batch before ordering quantities
Ceramic glaze varies subtly between production batches. When a project repeats the same basin across several bathrooms, order against one approved sample and note the glaze reference in the purchase order. Keep that sample on site: it is the fastest way to settle a dispute about colour match or surface quality at handover, and it protects you when fixtures arrive in mixed consignments.
The same discipline applies across the sanitary range. Where a scheme mixes a freestanding basin with matching toilets and wall-hung basins from one series, list every item by model code in a single schedule so substitutions are visible at quotation stage instead of appearing on site.
Decide how spares, packaging and installation will be handled
Freestanding ceramics travel at risk. Ask the supplier to confirm in writing how each basin is crated, whether corner protection and internal bracing are used, and what the inspection procedure is on receipt. Photograph the packing before unpacking, and record any damage against the consignment note on the day of delivery.
Then plan for the life of the building rather than the week of installation. Note which models are still in production, whether spare back panels, wastes or matching basins can be reordered later, and how replacements are ordered for a building that may need them in five years. A short spares schedule agreed with your bathroom sanitary fixtures supplier avoids the situation where a single damaged basin cannot be replaced because the model has been discontinued.
Write installation and handover into the contract, not the site conversation
For projects sourced from overseas manufacturers, the useful question is who signs each stage: specification, production, shipping, delivery and fixing. Our project services cover design coordination, custom/OEM work, door-to-door logistics and installation support, and we ask clients to confirm scope for their specific job rather than assume a standard package applies everywhere.
Agree the inspection points before production starts: sample approval, pre-shipment photographs of packed basins, and a snag list at handover covering stability of the wall fixing, sealant lines, waste connections and surface condition. Those four checks take minutes and prevent the callbacks that usually follow ceramic installations.
A practical documentation set for this basin
For a round freestanding pedestal basin on a residential or hospitality project, we would expect to find six items in the file: an approved technical sheet with dated dimensions; a coordinated setting-out drawing showing waste, supply and floor levels; a signed glaze and finish sample reference; a packing and delivery-inspection note; a spares and re-order schedule; and a signed installation snag list. Where those exist, the basin stops being a decorative decision and becomes a documented component of the fit-out.
If you are specifying sanitary ware for a villa or hotel project and want technical sheets, packing details and a coordinated fixture schedule before ordering, send us the room layout and we will confirm what the 1003S needs on your job.